# packages

pkgId: e31180808b42786c28634d7b04902e1f7c1331c08d9d0be0225d98f02fb4f050
name: dt
arch: src
version: 26
epoch: 0
release: 2.fc45
summary: Generic data test program
url: https://github.com/RobinTMiller/dt
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dt-26-2.fc45.src.rpm
checksum_type: sha256
description:
  dt is a generic data test program used to verify proper operation of
  peripherals, file systems, device drivers, or any data stream supported by the
  operating system. In its' simplest mode of operation, dt writes and then
  verifies its' default data pattern, then displays performance statistics and
  other test parameters before exiting. Since verification of data is performed,
  dt can be thought of as a generic diagnostic tool.

  dt command lines are similar to the dd program, which is popular on most UNIX
  systems. It contains numerous options to give the user control of various test
  parameters.

  dt has been used to successfully test disks, tapes, serial lines, parallel
  lines, pipes, and memory mapped files. In fact, dt can be used for any device
  that allows the standard open, read, write, and close system calls. Special
  support is necessary for some devices, such as serial lines, for setting up the
  speed, parity, data bits, etc.

  Available documentation is located in /usr/share/doc/dt. Sample
  scripts and config data are installed in /usr/share/dt.


pkgId: a2d7360f40ac63a37b4472d57c9cc951f323c0bb0b80aa5ca831e3f4719b7c99
name: dt-schema
arch: src
version: 2026.04
epoch: 0
release: 1.fc45
summary: Tooling for devicetree validation using YAML and jsonschema
url: http://devicetree.org/
rpm_license: BSD-2-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dt-schema-2026.04-1.fc45.src.rpm
checksum_type: sha256
description:
  This tool contains test code for devicetree schema validation using the
  json-schema vocabulary. Schema files are written in YAML (a superset of
  JSON), and operate on the YAML encoding of Devicetree data. Devicetree
  data must be transcoded from DTS to YAML before being used by this tool.


pkgId: fa803ba4e72e20bf3bb22c0360a40accb1f8f53e84fade7191ec4692f7082981
name: dtach
arch: src
version: 0.9
epoch: 0
release: 33.fc45
summary: A simple program that emulates the detach feature of screen
url: http://dtach.sourceforge.net
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dtach-0.9-33.fc45.src.rpm
checksum_type: sha256
description:
  dtach is a program that emulates the detach feature of screen, with
  less overhead. It is designed to be transparent and un-intrusive; it
  avoids interpreting the input and output between attached terminals
  and the program under its control. Consequently, it works best with
  full-screen applications such as emacs.


pkgId: af15835a845be11d8011edb1fb57d26f53f01366bc35f1fb4fd6c2a50dcbb106
name: dtc
arch: src
version: 1.8.1
epoch: 0
release: 5.fc45
summary: Device Tree Compiler
url: https://devicetree.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dtc-1.8.1-5.fc45.src.rpm
checksum_type: sha256
description:
  Devicetree is a data structure for describing hardware. Rather than hard coding
  every detail of a device into an operating system, many aspects of the hardware
  can be described in a data structure that is passed to the operating system at
  boot time. The devicetree is used by OpenFirmware, OpenPOWER Abstraction Layer
  (OPAL), Power Architecture Platform Requirements (PAPR) and in the standalone
  Flattened Device Tree (FDT) form.


pkgId: 9ac0e141f6f5c1fb6feb57bf684997f4698709a90185ca6b2aed46c46667d020
name: dtk6gui
arch: src
version: 6.7.32
epoch: 0
release: 7.fc45
summary: Deepin Toolkit, gui module for DDE look and feel
url: https://github.com/linuxdeepin/dtkgui
rpm_license: LGPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dtk6gui-6.7.32-7.fc45.src.rpm
checksum_type: sha256
description:
  Deepin Tool Kit (DtkGui) is the development graphical user interface of all
  C++/Qt Developer work on Deepin.


pkgId: 77c39c9f8a6d3c2ee72fe957abace15c5689eeb033520b193f2ba0e6d03eb228
name: dualscreen-mouse-utils
arch: src
version: 0.5
epoch: 0
release: 36.fc45
summary: Utilities for use with dual head setups using independent screens
url: http://digamma.cs.unm.edu/trac.dmohr/wiki/DualscreenMouseUtils
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dualscreen-mouse-utils-0.5-36.fc45.src.rpm
checksum_type: sha256
description:
  Utilities for use with old-school dual head setups: namely not
  twinview / one big desktop, but rather two X screens.

  mouse-switchscreen:
    Change the mouse cursor from one screen to the other. Remembers the previous
    mouse position for each screen.

  mouse-wrapscreen:
    If you have an xorg.conf where both X screens are "separated" on the X
    coordinates, then the mouse cursor cannot cross. Which is sometimes desired,
    and sometimes not. Using mouse-wrapscreen you can configure them to be
    "uncrossable", and then run it in the background when you do want to be able
    to cross the cursor.


pkgId: 3b889f733573d0fa68a103e207bdb13849376f00b2d651babd58886290b3a114
name: duc
arch: src
version: 1.4.6
epoch: 0
release: 3.fc45
summary: Disk usage tools
url: https://duc.zevv.nl/
rpm_license: LGPL-3.0-or-later AND MIT-Khronos-old
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/duc-1.4.6-3.fc45.src.rpm
checksum_type: sha256
description:
  Duc is a collection of tools for indexing, inspecting and visualizing
  disk usage. Duc maintains a database of accumulated sizes of directories
  of the file system, and allows you to query this database with some tools,
  or create fancy graphs showing you where your bytes are.


pkgId: 5faf7b8e5e428f622ed6772fbffc55f89ec93e571b429fdf2693303cc9529c1b
name: duel3
arch: src
version: 0.1
epoch: 0
release: 0.47.20060225.fc45
summary: One on one spaceship duel in a 2D arena
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-32.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/duel3-0.1-0.47.20060225.fc45.src.rpm
checksum_type: sha256
description:
  The sudden attack from the Martain Rim miners caught the Earth by surprise,
  there was no way the meager Earth Space Fleet could defend themselves. The
  miners attacked, and eliminated their enemies, and then returned to the
  asteroid belt. However, Earth could not accept such an embarrassing defeat. The
  military developed new space fighters, and trained several squadrons of elite
  pilots. The task force was then deployed against the miners. These trained
  pilots utterly defeated the miners in a matter of weeks, and the first space
  war in human history was finished.

  The military, however, now had a new problem on their hands. These new elite
  pilots were becoming restless, and there was no way for them to test their
  skills. The military dare not disband the force, or let their skills dull, so
  the Duel Combat League was formed. The newly formed league quickly became the
  premier entertainment form on the planet, and the military's largest source of
  income.

  Take control of a Duel fighter, and test your skills against your opponents and
  the arena itself in fast-paced space combat.


pkgId: c319cc57022e6b83789dfbd69d5b6fa23f100919f38347b0d8208e78a504ca04
name: dumb
arch: src
version: 0.9.3
epoch: 0
release: 47.fc45
summary: IT, XM, S3M and MOD player library
url: http://dumb.sourceforge.net/
rpm_license: zlib
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dumb-0.9.3-47.fc45.src.rpm
checksum_type: sha256
description:
  IT, XM, S3M and MOD player library. Mainly targeted for use with the allegro
  game programming library, but it can be used without allegro. Faithful to the
  original trackers, especially IT.


pkgId: 3f59f80e4002697d8d335ff652d677af4693a4e304cabd887691cb571d0cd7e5
name: dumb-init
arch: src
version: 1.2.5
epoch: 0
release: 16.fc45
summary: Entry-point for containers that proxies signals
url: https://github.com/Yelp/dumb-init
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dumb-init-1.2.5-16.fc45.src.rpm
checksum_type: sha256
description:
  dumb-init is a simple process supervisor and init system designed to run as
  PID 1 inside minimal container environments (such as Podman and Docker).

  * It can handle orphaned zombie processes.
  * It can pass signals properly for simple containers.


pkgId: 5789b012627a6a6d1cd8da25bd07563fa47c96d6334ee6679f31727a1943e084
name: dummy-package-canary
arch: src
version: 2
epoch: 0
release: 28.fc45
summary: Dummy package to exercise the packaging stack
rpm_license: CC-PDDC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dummy-package-canary-2-28.fc45.src.rpm
checksum_type: sha256
description:
  This a dummy canary package to exercise the packaging stack and make sure it
  actually works as expected (e.g. by removing and installing this package as
  part of a configuration management flow).


pkgId: 4c4fc8946860a3748ddee91b01c11fea3f8788430c7292b24dbe7ef437ee0167
name: dump
arch: src
version: 0.4
epoch: 1
release: 0.63.b52.fc45
summary: Programs for backing up and restoring ext2/ext3/ext4 filesystems
url: https://sourceforge.net/projects/dump/
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dump-0.4-0.63.b52.fc45.src.rpm
checksum_type: sha256
description:
  The dump package contains both dump and restore. Dump examines files
  in a filesystem, determines which ones need to be backed up, and
  copies those files to a specified disk, tape, or other storage medium.
  The restore command performs the inverse function of dump; it can
  restore a full backup of a filesystem. Subsequent incremental backups
  can then be layered on top of the full backup. Single files and
  directory subtrees may also be restored from full or partial backups.

  Install dump if you need a system for both backing up filesystems and
  restoring filesystems after backups.


pkgId: 8f5aa4986d33b4fe83d72c080f36329d8bcec9d4699d5c4f5154abb87013ec53
name: dump1090
arch: src
version: 0
epoch: 0
release: 19.20250802git0c3bb23.fc45
summary: Simple Mode S decoder specifically designed for RTLSDR devices
url: https://github.com/antirez/dump1090
rpm_license: LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dump1090-0-19.20250802git0c3bb23.fc45.src.rpm
checksum_type: sha256
description:
  Dump 1090 is a Mode S decoder specifically designed for RTLSDR devices.

  Install this to use your RTL-SDR to track commercial aircraft in your area.

  The main features are:

  * Robust decoding of weak messages, with mode1090 many users observed
    improved range compared to other popular decoders.
  * Network support: TCP30003 stream (MSG5...), Raw packets, HTTP.
  * Embedded HTTP server that displays the currently detected aircraft on
    Google Map.
  * Single bit errors correction using the 24 bit CRC.
  * Ability to decode DF11, DF17 messages.
  * Ability to decode DF formats like DF0, DF4, DF5, DF16, DF20 and DF21
    where the checksum is xored with the ICAO address by brute forcing the
    checksum field using recently seen ICAO addresses.
  * Decode raw IQ samples from file (using --ifile command line switch).
  * Interactive command-line interface mode where aircraft currently detected
    are shown as a list refreshing as more data arrives.
  * CPR coordinates decoding and track calculation from velocity.
  * TCP server streaming and receiving raw data to/from connected clients
    (using --net).


pkgId: 73234f4ea51341ea7fbcb41f3044760efffd39a489f0316411f0f1f2af715bbf
name: dumpasn1
arch: src
version: 20250606
epoch: 0
release: 5.fc45
summary: ASN.1 object dump utility
url: https://github.com/cryptlib/dumpasn1/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dumpasn1-20250606-5.fc45.src.rpm
checksum_type: sha256
description:
  dumpasn1 is an ASN.1 object dump program that will dump data encoded
  using any of the ASN.1 encoding rules in a variety of user-specified
  formats.


pkgId: 073399b81c91adaf684296e2df78b89dfc4655e23243a528c0b6566d6ca65e99
name: dunst
arch: src
version: 1.13.2
epoch: 0
release: 2.fc45
summary: Lightweight and customizable notification-daemon
url: https://dunst-project.org
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dunst-1.13.2-2.fc45.src.rpm
checksum_type: sha256
description:
  Dunst is a lightweight replacement for the notification daemons provided by
  most desktop environments. It’s very customizable, isn’t dependent on any
  toolkits, and therefore fits into those window manager centric setups we all
  love to customize to perfection.


pkgId: ac691319fff4a74198244689335487b0f613ec210a0e5d3ecc9f438e215a9119
name: duo_unix
arch: src
version: 2.2.3
epoch: 0
release: 4.fc45
summary: Duo two-factor authentication for UNIX systems
url: https://duo.com/
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/duo_unix-2.2.3-4.fc45.src.rpm
checksum_type: sha256
description:
  Duo provides simple two-factor authentication as a service via:

      1.  Phone callback
      2.  SMS-delivered one-time passcode
      3.  Duo mobile app to generate one-time passcode
      4.  Duo mobile app for smartphone push authentication
      5.  Duo hardware token to generate one-time passcode

  This package allows an admin (or ordinary user) to quickly add Duo
  authentication to any UNIX login without setting up secondary user
  accounts, directory synchronization, servers, or hardware.

rpm_license:
  GPL-2.0-with-classpath-exception AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND BSD-4-Clause AND FSFAP AND FSFULLR AND GPL-1.0-only AND LicenseRef-URLEnc-MIT AND MIT AND SSH-short


pkgId: ab8dc154a45187e81973a5f7efd301883a67bf3d75c15079d0bb6faf4890426a
name: duperemove
arch: src
version: 0.15.2
epoch: 0
release: 4.fc45
summary: Tools for deduping file systems
url: https://github.com/markfasheh/duperemove
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/duperemove-0.15.2-4.fc45.src.rpm
checksum_type: sha256
description:
  Duperemove is a simple tool for finding duplicated extents and
  submitting them for deduplication. When given a list of files it will
  hash their contents on a block by block basis and compare those hashes
  to each other, finding and categorizing extents that match each other.

  When given the -d option, duperemove will submit those extents for
  deduplication using the btrfs-extent-same ioctl.


pkgId: 1f592d800a0b16b2381deb66a6ee3341b22d8b46268161a00a4621eed6f08493
name: duplicity
arch: src
version: 3.1.0
epoch: 0
release: 3.fc45
summary: Encrypted bandwidth-efficient backup using rsync algorithm
url: https://duplicity.gitlab.io/
rpm_license: GPL-2.0-or-later AND MIT AND GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/duplicity-3.1.0-3.fc45.src.rpm
checksum_type: sha256
description:
  Duplicity incrementally backs up files and directory by encrypting
  tar-format volumes with GnuPG and uploading them to a remote (or
  local) file server. In theory many protocols for connecting to a
  file server could be supported; so far ssh/scp, local file access,
  rsync, ftp, HSI, WebDAV and Amazon S3 have been written.

  Because duplicity uses librsync, the incremental archives are space
  efficient and only record the parts of files that have changed since
  the last backup. Currently duplicity supports deleted files, full
  unix permissions, directories, symbolic links, fifos, device files,
  but not hard links.


pkgId: 2532db84901cdb2e7378d3e4f5b5e79f921eb23d7e207b8ea22c1e31ea63e9de
name: duply
arch: src
version: 2.5.6
epoch: 0
release: 3.fc45
summary: Wrapper for duplicity
url: http://duply.net/
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-28.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/duply-2.5.6-3.fc45.src.rpm
checksum_type: sha256
description:
  duply is a frontend for the mighty duplicity magic. It simplifies
  running duplicity with cron or on command line by:

  - keeping recurring settings in profiles per backup job
  - automated import/export of keys between profile and keyring
  - enabling batch operations e.g. backup_verify_purge
  - executing pre/post scripts
  - precondition checking for flawless duplicity operation

  Since version 1.5.0 all duplicity backends are supported. Hence the
  name changed from ftplicity to duply.


pkgId: 942faef80e7cd634124642132cfa60e72be83b9e15cd0e6f1fac9c3f3896ca28
name: dustin-domestic-manners-fonts
arch: src
version: 20030527
epoch: 0
release: 36.fc45
summary: Handwriting font by Dustin Norlander
url: http://www.dustismo.com
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dustin-domestic-manners-fonts-20030527-36.fc45.src.rpm
checksum_type: sha256
description:
  This font mimics the authors handwriting. The name comes from the book
  Domestic Manners of the Americans, by Fanny Trollope.

  Font contains, letters, numbers, punctuation, accented characters and
  some special characters (most European Latin characters).


pkgId: 4de14503371e4d1b443d525107389529305928ef18151a9914d731338e6edefd
name: dustin-dustismo-fonts
arch: src
version: 20030318
epoch: 0
release: 37.fc45
summary: General purpose sans-serif font with bold, italic and bold-italic variations
url: http://www.dustismo.com
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dustin-dustismo-fonts-20030318-37.fc45.src.rpm
checksum_type: sha256
description:
  General purpose fonts by Dustin Norlander available in
  serif and sans-serif versions. The fonts cover all European Latin characters.


pkgId: 351b7cfda4a386bbc7a4907bd6500635fafdbe827db0fde776e9a2ca87d5d491
name: dustrac
arch: src
version: 2.2.0
epoch: 0
release: 3.fc45
summary: Traditional top-down car racing game
url: https://juzzlin.github.io/DustRacing2D/
rpm_license: GPL-3.0-or-later AND GPL-2.0-or-later AND LGPL-3.0-or-later AND MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dustrac-2.2.0-3.fc45.src.rpm
checksum_type: sha256
description:
  Dust Racing 2D is a tile-based 2D racing game written with Qt (in C++)
  and OpenGL. Dust Racing 2D comes with a Qt-based level editor for level
  creation. A separate engine, MiniCore, is used for physics modeling.


pkgId: c36763bccb85774066613de8088e2c198c5e5817aba387250fc8e6a95c8f8228
name: dvblast
arch: src
version: 3.5
epoch: 0
release: 3.fc45
summary: Simple and powerful streaming application
url: https://www.videolan.org/projects/dvblast.html
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dvblast-3.5-3.fc45.src.rpm
checksum_type: sha256
description:
  DVBlast is a simple and powerful streaming application based on the
  linux-dvb API. It opens a DVB device, tunes it, places PID filters,
  configures a CAM module, and demultiplexes the packets to several RTP
  outputs. It supports the new S2API of linux-dvb (compile option).


pkgId: 1a835fab2510ecca9a2fc54db5d37f761ec0616da21e4472e415f4db050daa15
name: dvd+rw-tools
arch: src
version: 7.1
epoch: 0
release: 47.fc45
summary: Toolchain to master DVD+RW/+R media
url: http://fy.chalmers.se/~appro/linux/DVD+RW/
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dvd+rw-tools-7.1-47.fc45.src.rpm
checksum_type: sha256
description:
  Collection of tools to master DVD+RW/+R media. For further
  information see http://fy.chalmers.se/~appro/linux/DVD+RW/.


pkgId: 54c866d30d9a83b5ce4eba87ee61182a80977fa6c816c5c9e9f98a9740fa7f54
name: dvdauthor
arch: src
version: 0.7.2
epoch: 0
release: 30.fc45
summary: Command line DVD authoring tool
url: http://dvdauthor.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dvdauthor-0.7.2-30.fc45.src.rpm
checksum_type: sha256
description:
  DVDAuthor is a set of tools to help you author the file and directory
  structure of a DVD-Video disc, including programmatic commands for
  implementing interactive behavior. It is driven by command lines and
  XML control files, though there are other programs that provide
  GUI-based front ends if you prefer.


pkgId: c532f2d93be74888f7dde53e4e4c7f49b83095e2ccdfb3a471f7ca9e30425851
name: dvdbackup
arch: src
version: 0.4.2
epoch: 0
release: 31.fc45
summary: Command line tool for ripping video DVDs
url: http://dvdbackup.sourceforge.net/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dvdbackup-0.4.2-31.fc45.src.rpm
checksum_type: sha256
description:
  dvdbackup is a tool to rip video DVDs from the command line. It has
  the advantages of being small, fast, and easy to use.


pkgId: d37b9fed49bf42b0a042717a57714c5335fc5c0c08cc3aae608a883b147b2851
name: dvdisaster
arch: src
version: 0.79.5
epoch: 0
release: 25.fc45
summary: Additional error protection for CD/DVD media
url: http://dvdisaster.net
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dvdisaster-0.79.5-25.fc45.src.rpm
checksum_type: sha256
description:
  dvdisaster provides a margin of safety against data loss on CD and DVD media
  caused by scratches or aging. It creates error correction data,
  which is used to recover unreadable sectors if the disc becomes damaged
  at a later time.


pkgId: 8c644304cf9af52605dd22517c3f8972c294ed09aa111a904363def2371d96e1
name: dvtm
arch: src
version: 0.15
epoch: 0
release: 25.fc45
summary: Tiling window management for the console
url: http://www.brain-dump.org/projects/dvtm/
rpm_license: MIT and ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dvtm-0.15-25.fc45.src.rpm
checksum_type: sha256
description:
  dvtm brings the concept of tiling window management, popularized by
  X11-window managers like dwm to the console. As a console window
  manager it tries to make it easy to work with multiple console based
  programs like vim, mutt, cmus or irssi.


pkgId: 3479897adcdd613945dd47e3306a87d74c85603257d55aae59080a50533033c1
name: dwarves
arch: src
version: 1.30
epoch: 0
release: 4.fc45
summary: Debugging Information Manipulation Tools (pahole & friends)
url: http://acmel.wordpress.com
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dwarves-1.30-4.fc45.src.rpm
checksum_type: sha256
description:
  dwarves is a set of tools that use the debugging information inserted in ELF
  binaries by compilers such as GCC, used by well known debuggers such as GDB,
  and more recent ones such as systemtap.

  Utilities in the dwarves suite include pahole, that can be used to find
  alignment holes in structs and classes in languages such as C, C++, but not
  limited to these.

  It also extracts other information such as CPU cacheline alignment, helping
  pack those structures to achieve more cache hits.

  These tools can also be used to encode and read the BTF type information format
  used with the Linux kernel bpf syscall, using 'pahole -J' and 'pahole -F btf'.

  A diff like tool, codiff can be used to compare the effects changes in source
  code generate on the resulting binaries.

  Another tool is pfunct, that can be used to find all sorts of information about
  functions, inlines, decisions made by the compiler about inlining, etc.

  One example of pfunct usage is in the fullcircle tool, a shell that drivers
  pfunct to generate compileable code out of a .o file and then build it using
  gcc, with the same compiler flags, and then use codiff to make sure the
  original .o file and the new one generated from debug info produces the same
  debug info.

  Pahole also can be used to use all this type information to pretty print raw
  data according to command line directions.

  Headers can have its data format described from debugging info and offsets from
  it can be used to further format a number of records.

  The btfdiff utility compares the output of pahole from BTF and DWARF to make
  sure they produce the same results.


pkgId: b78d9574c04bff605da9216c17f5ed75fc02c5990b9fcbe476e9caf78cac0dcd
name: dwgrep
arch: src
version: 0.4
epoch: 0
release: 24.fc44
summary: A tool for querying Dwarf (debuginfo) graphs
url: http://pmachata.github.io/dwgrep/index.html
rpm_license: GPL-3.0-or-later AND ( GPL-2.0-or-later OR LGPL-3.0-or-later )
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dwgrep-0.4-24.fc44.src.rpm
checksum_type: sha256
description:
  Dwgrep is a tool, an associated language (called Zwerg) and a library
  (libzwerg) for querying Dwarf (debuginfo) graphs.

  You can think of dwgrep expressions as instructions describing a path
  through a graph, with assertions about the type of nodes along the
  way: that a node is of given type, that it has a given attribute,
  etc. There are also means of expressing sub-conditions,
  i.e. assertions that a given node is acceptable if a separate
  expression matches (or does not match) a different path through the
  graph.


pkgId: 6a938daae0db478ed501792e71f91afe61124a45fe407b61a680ac2181bc6efd
name: dwlocstat
arch: src
version: 0.1
epoch: 0
release: 0.34.20121105gitc55cb50.fc45
summary: Tool for examining Dwarf location info coverage
url: https://github.com/pmachata/dwlocstat
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dwlocstat-0.1-0.34.20121105gitc55cb50.fc45.src.rpm
checksum_type: sha256
description:
  dwlocstat is a tool for examining Dwarf location info coverage.  It
  goes through DIEs of given binary's debug info that represent
  variables and function parameters.  For each such DIE, it computes
  coverage of that DIE's range by location expressions.


pkgId: f08473778053a4c8ecd04a85dece16c27c8463ff94aa3ebcda693de03dfb0569
name: dwz
arch: src
version: 0.17
epoch: 0
release: 3.fc45
summary: DWARF optimization and duplicate removal tool
url: https://sourceware.org/dwz/
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dwz-0.17-3.fc45.src.rpm
checksum_type: sha256
description:
  The dwz package contains a program that attempts to optimize DWARF
  debugging information contained in ELF shared libraries and ELF executables
  for size, by replacing DWARF information representation with equivalent
  smaller representation where possible and by reducing the amount of
  duplication using techniques from DWARF standard appendix E - creating
  DW_TAG_partial_unit compilation units (CUs) for duplicated information
  and using DW_TAG_imported_unit to import it into each CU that needs it.

rpm_license:
  GPL-3.0-or-later AND (GPL-3.0-or-later WITH GCC-exception-3.1) AND GPL-2.0-or-later AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND LGPL-2.0-or-later


pkgId: 6c3429dec27a651b1c4053a2e9dceb69c7bec6c77fdaa0b2619abc756016157e
name: dxcc
arch: src
version: 20080225
epoch: 0
release: 56.fc45
summary: Small utility which determines the ARRL DXCC entity of a ham radio callsign
url: http://fkurz.net/ham/dxcc.html
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dxcc-20080225-56.fc45.src.rpm
checksum_type: sha256
description:
  dxcc is a small utility which determines the ARRL DXCC entity of a ham radio
  callsign, based on the cty.dat country file by Jim Reisert, AD1C.

  Optional GUI with a world map showing the DXCC's location available.


pkgId: 0c278923b86dc8f8c464c9bb27161335e9b4a7d5622db7f0c911672a622d201a
name: dxf2gcode
arch: src
version: 20240509
epoch: 0
release: 13.fc45
summary: 2D drawings to CNC machine compatible G-Code converter
url: https://sourceforge.net/p/dxf2gcode/wiki/Home/
rpm_license: GPL-3.0-or-later AND LicenseRef-Callaway-MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-28.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dxf2gcode-20240509-13.fc45.src.rpm
checksum_type: sha256
description:
  dxf2gcode is a tool for converting 2D (DXF, PDF, PS) drawings to CNC machine
  compatible GCode. It has the following features:
      - Integration in EMC2,
      - Fully adjustable Postprocessor,
      - G0 moves reduction by route optimization,
      - Import of DXF and PDF,
      - Improved accuracy for splines import by Line and Arc's,
      - Mill parameter specification by layers,
      - Drag knife and lathe support,
      - Breaks a.k.a Tabs support,
      - AutoCAD Blocks and Inserts,
      - Multiple tools,
      - Multiple language support: English, German, French, Russian,
      - 3D viewer.


pkgId: e00e9716767a883f6b4593ab1b7975d31faa5ba114f7d683b10936e1b516e639
name: dxpc
arch: src
version: 3.9.2
epoch: 0
release: 32.fc45
summary: A Differential X Protocol Compressor
url: http://www.vigor.nu/dxpc/
rpm_license: LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dxpc-3.9.2-32.fc45.src.rpm
checksum_type: sha256
description:
  dxpc is an X protocol compressor designed to improve the
  speed of X11 applications run over low-bandwidth links
  (such as dialup PPP connections or ADSL).


pkgId: 64561b179a68b91db88e632c6a1f058008559a055f0e8f3e38e2ee88bd929b49
name: dxvk-native
arch: src
version: 2.7.1
epoch: 0
release: 3.fc45
summary: Vulkan-based D3D8~D3D11 implementation for Linux
url: https://github.com/doitsujin/dxvk
rpm_license: Zlib and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dxvk-native-2.7.1-3.fc45.src.rpm
checksum_type: sha256
description:
  DXVK Native is a port of DXVK to Linux which allows it
  to be used natively without Wine.

  This is primarily useful for game and application ports
  to either avoid having to write another rendering backend,
  or to help with port bringup during development.


pkgId: aa3b8112ef10022bf3a34038317d8feb053a074c3c24c3e3fad30bb18bcf45f2
name: dymo-cups-drivers
arch: src
version: 1.4.0.5
epoch: 0
release: 26.fc45
summary: DYMO LabelWriter Drivers for CUPS
url: http://www.dymo.com
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dymo-cups-drivers-1.4.0.5-26.fc45.src.rpm
checksum_type: sha256
description:
  This package contains DYMO LabelWriter 4xx and 3xx series drivers for CUPS.
  For LabelWriter 5xx series drivers, use the dymo-cups-drivers-lw5xx package.


pkgId: 40aadea4a4838f8bd9de577c63d71ca9e0f0cbdb7169aad97fa94649d7ca34ca
name: dymo-cups-drivers-lw5xx
arch: src
version: 2.0.0.0
epoch: 0
release: 3.fc45
summary: DYMO LabelWriter 5xx Drivers for CUPS
url: https://github.com/dymosoftware/Drivers
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dymo-cups-drivers-lw5xx-2.0.0.0-3.fc45.src.rpm
checksum_type: sha256
description:
  This package contains DYMO LabelWriter 5xx series drivers for CUPS.
  For LabelWriter 4xx and 3xx series drivers, please use the older
  dymo-cups-drivers package.


pkgId: c15bb1fd673fa7ec9f0ccb078931325049f0d92bf16b809db805b2187f23ddae
name: dynaconf
arch: src
version: 3.2.13
epoch: 0
release: 3.fc45
summary: A dynamic configuration system for Python projects
url: https://github.com/dynaconf/dynaconf
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dynaconf-3.2.13-3.fc45.src.rpm
checksum_type: sha256
description:
  Dynaconf is a layered configuration system for Python applications with strong
  support for 12-factor applications and extensions for Flask and Django


pkgId: 164549329e9396c8bfca75f46946cb84eb30c2436040ceb707e0917df5b422f4
name: dynamic-hibernate
arch: src
version: 0.1.0~git20251209.aaf963c
epoch: 0
release: 3.fc45
summary: Automatic dynamic swapfile management on Btrfs for hibernation
url: https://invent.kde.org/tduck/dynamic-hibernate
rpm_license: (GPL-2.0-only or GPL-3.0-only) and BSD-3-Clause and CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dynamic-hibernate-0.1.0~git20251209.aaf963c-3.fc45.src.rpm
checksum_type: sha256
description:
  This software enables dynamically creating swapfiles before hibernation
  on btrfs-based systems (as well as automatically hiding the bootloader
  on systemd-boot based systems), and then allows you to hibernate to it.

  This circumvents the requirement for a swap partition or pre-existing swapfile.

  It also provides a notifier which alerts the user if and why hibernation fails.


pkgId: 4d31bc3fe8048b7cff449da4dc2813fe68dac5208dd977656f33c344d6c7fa11
name: dyninst
arch: src
version: 13.0.0
epoch: 0
release: 11.fc45
summary: An API for Run-time Code Generation
url: https://www.paradyn.org
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/d/dyninst-13.0.0-11.fc45.src.rpm
checksum_type: sha256
description:
  Dyninst is an Application Program Interface (API) to permit the insertion of
  code into a running program. The API also permits changing or removing
  subroutine calls from the application program. Run-time code changes are
  useful to support a variety of applications including debugging, performance
  monitoring, and to support composing applications out of existing packages.
  The goal of this API is to provide a machine independent interface to permit
  the creation of tools and applications that use run-time code patching.

rpm_license:
  LGPL-2.1-or-later AND GPL-3.0-or-later WITH Bison-exception-2.2 AND LicenseRef-Fedora-Public-Domain AND BSD-3-Clause


pkgId: 569e54ddea41ded557266b7d277261d156001fb36b2ba3222d0b63d8993d5a15
name: e-antic
arch: src
version: 2.1.1
epoch: 0
release: 2.fc45
summary: Real Embedded Algebraic Number Theory In C
url: https://flatsurf.github.io/e-antic/libeantic/
rpm_license: LGPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e-antic-2.1.1-2.fc45.src.rpm
checksum_type: sha256
description:
  E-ANTIC is a C/C++ library to deal with real embedded number fields, built on
  top of ANTIC.  Its aim is to have as fast as possible exact arithmetic
  operations and comparisons.


pkgId: 6f13473392f37d88f0615150582f6ef42f7c0d00ffae065b915bd681df50df59
name: e00compr
arch: src
version: 1.0.1
epoch: 0
release: 55.fc45
summary: Library to compress and uncompress E00 files
url: http://avce00.maptools.org/e00compr
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e00compr-1.0.1-55.fc45.src.rpm
checksum_type: sha256
description:
  E00compr is an ANSI C library that reads and writes Arc/Info compressed E00
  files. Both “PARTIAL” and “FULL” compression levels are supported.

  This package can be divided in three parts:

    • The ‘e00conv’ command-line program. This program takes a E00 file as input
      (compressed or not) and copies it to a new file with the requested
      compression level (NONE, PARTIAL or FULL).

    • A set of library functions to read compressed E00 files. These functions
      read a E00 file (compressed or not) and return a stream of uncompressed
      lines, making the E00 file appear as if it was not compressed.

    • A set of library functions to write compressed E00 files. These functions
      take one line after another from what should be a uncompressed E00 file,
      and write them to a file with the requested compression level, either NONE,
      PARTIAL or FULL.

  This is a metapackage that installs both the command-line tools
  (e00compr-tools) and the libraries (e00compr-libs).


pkgId: 0b3386f7d6022e8422d842de3747ea039158c4e009552b068380f60034762eb7
name: e16
arch: src
version: 1.0.31
epoch: 0
release: 4.fc45
summary: The Enlightenment window manager, DR16
url: http://www.enlightenment.org/
rpm_license: LicenseRef-Callaway-MIT-with-advertising AND GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e16-1.0.31-4.fc45.src.rpm
checksum_type: sha256
description:
  Enlightenment is a window manager for the X Window System that is
  designed to be powerful, extensible, configurable and pretty darned
  good looking! It is one of the more graphically intense window
  managers.

  Enlightenment goes beyond managing windows by providing a useful and
  appealing graphical shell from which to work. It is open in design and
  instead of dictating a policy, allows the user to define their own
  policy, down to every last detail.

  This package will install the Enlightenment window manager, development
  release 16.


pkgId: ad2047cbf77b2235b9f1e407fcb259bf7933d08871f9d9f87df105f22e7efbd3
name: e16-epplets
arch: src
version: 0.18
epoch: 0
release: 2.fc45
summary: Epplets for Enlightenment, DR16
url: http://www.enlightenment.org/
rpm_license: LicenseRef-Callaway-MIT-with-advertising AND GPL-1.0-or-later AND GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e16-epplets-0.18-2.fc45.src.rpm
checksum_type: sha256
description:
  Epplets are small, handy Enlightenment applets, similar to dockapps or
  applets for other packages.  The epplets package contains the base
  epplet API library and header files, as well as the core set of
  epplets, including CPU monitors, clocks, a mail checker, mixers, a
  slideshow, a URL grabber, a panel-like toolbar, and more.


pkgId: cf008d5298c23c55f359ea81bd61450b1cb55227974e18507d7eede1301697fa
name: e16-keyedit
arch: src
version: 0.10
epoch: 0
release: 7.fc45
summary: GUI for editing keybindings in Enlightenment, DR16
url: http://www.enlightenment.org/
rpm_license: LicenseRef-Callaway-MIT-with-advertising
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e16-keyedit-0.10-7.fc45.src.rpm
checksum_type: sha256
description:
  The e16-keyedit package provides a graphical interface for managing
  keybindings in Enlightenment, DR16.


pkgId: 32391bd5df7ef121a68db06bedcbd660b5361d5a02100dd2a1900cad097a70eb
name: e16-themes
arch: src
version: 1.0.1
epoch: 0
release: 30.fc45
summary: Themes for Enlightenment, DR16
url: http://www.enlightenment.org/
rpm_license: LicenseRef-Callaway-MIT-with-advertising
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e16-themes-1.0.1-30.fc45.src.rpm
checksum_type: sha256
description:
  The BlueSteel, BrushedMetal-Tigert, Ganymede and ShinyMetal themes
  for Enlightenment, DR16.

  This is part of the Enlightenment distribution.


pkgId: de2cbf783f68eff71ab8b30a31fd5df8d5fb59a412dce0c77c00d86bb9d15ecc
name: e2fsprogs
arch: src
version: 1.47.4
epoch: 0
release: 2.fc45
summary: Utilities for managing ext2, ext3, and ext4 file systems
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e2fsprogs-1.47.4-2.fc45.src.rpm
checksum_type: sha256
description:
  The e2fsprogs package contains a number of utilities for creating,
  checking, modifying, and correcting any inconsistencies in second,
  third and fourth extended (ext2/ext3/ext4) file systems. E2fsprogs
  contains e2fsck (used to repair file system inconsistencies after an
  unclean shutdown), mke2fs (used to initialize a partition to contain
  an empty ext2 file system), debugfs (used to examine the internal
  structure of a file system, to manually repair a corrupted
  file system, or to create test cases for e2fsck), tune2fs (used to
  modify file system parameters), and most of the other core ext2fs
  file system utilities.

  You should install the e2fsprogs package if you need to manage the
  performance of an ext2, ext3, or ext4 file system.


pkgId: 25b80e5b3b808b44b482b98f8cd532de7beb022f57d3c22ccc70dcff04432048
name: e2tools
arch: src
version: 0.1.0
epoch: 0
release: 16.fc45
summary: Manipulate files in unmounted ext2/ext3 filesystems
url: https://e2tools.github.io/
rpm_license: GPL-1.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e2tools-0.1.0-16.fc45.src.rpm
checksum_type: sha256
description:
  A simple set of utilities to read, write, and manipulate files in an
  ext2/ext3 filesystem directly using the ext2fs library. This works

    - without root access
    - without the filesystem being mounted
    - without kernel ext2/ext3 support

  The utilities are: e2cp e2ln e2ls e2mkdir e2mv e2rm e2tail


pkgId: a421ef371b8fae8c5f63f295d749f1ead483d27669b17f84ecc8bdd44a1827d5
name: e3
arch: src
version: 2.82
epoch: 0
release: 24.fc45
summary: Text editor with key bindings similar to WordStar, Emacs, pico, nedit, or vi
url: https://sites.google.com/site/e3editor/
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/e3-2.82-24.fc45.src.rpm
checksum_type: sha256
description:
  e3 is a full-screen, user-friendly text editor with an key bindings similar to
  that of either WordStar, Emacs, pico, nedit, or vi.


pkgId: dc8882a4d18645f735609fbb35b4553fdbe6ab4e80a2674d051e04f8770be038
name: earcut-hpp
arch: src
version: 3.2.3
epoch: 0
release: 2.fc45
summary: Fast, header-only polygon triangulation
url: https://github.com/mapbox/earcut.hpp
rpm_license: ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/earcut-hpp-3.2.3-2.fc45.src.rpm
checksum_type: sha256
description:
  A fast, header-only C++ port of earcut.js, the fastest and smallest JavaScript
  polygon triangulation library.

  Earcut favors raw speed and simplicity over triangulation quality, while being
  robust enough to handle most practical datasets without crashing or producing
  garbage, with an option to refine the result to Delaunay quality at a small
  cost. Originally built for Mapbox GL, it’s a good fit for real-time
  triangulation of geographical shapes and other practical data.

  It implements a modified ear slicing algorithm, optimized by z-order curve and
  spatial hashing and extended to handle holes, twisted polygons, degeneracies
  and self-intersections in a way that doesn’t guarantee correctness of
  triangulation, but attempts to always produce acceptable results for practical
  data. It’s based on ideas from FIST: Fast Industrial-Strength Triangulation of
  Polygons by Martin Held and Triangulation by Ear Clipping by David Eberly.


pkgId: ae263bca846aab3e30c417dfe7fef0df865fb970bf4693f1ca43155c9581722a
name: earlyoom
arch: src
version: 1.9.0
epoch: 0
release: 3.fc45
summary: Early OOM Daemon for Linux
url: https://github.com/rfjakob/earlyoom
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/earlyoom-1.9.0-3.fc45.src.rpm
checksum_type: sha256
description:
  User-space OOM killer daemon that can avoid the system going into the
  unresponsive state. It checks the amount of available memory and
  free swap up to 10 times a second (less often if there is a lot of free
  memory) and kills the largest processes with the highest oom_score.

  Percentages are configured through the configuration file.


pkgId: df07547187cd061b07feac17464b0c9c00282e127ba8c42184391680afc87deb
name: easy-rsa
arch: src
version: 3.2.6
epoch: 0
release: 3.fc45
summary: Simple shell based CA utility
url: https://github.com/OpenVPN/easy-rsa
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/easy-rsa-3.2.6-3.fc45.src.rpm
checksum_type: sha256
description:
  This is a small RSA key management package, based on the openssl
  command line tool, that can be found in the easy-rsa subdirectory
  of the OpenVPN distribution. While this tool is primary concerned
  with key management for the SSL VPN application space, it can also
  be used for building web certificates.


pkgId: 219e4d8fea6aab49051f7428ad6c7d2616052507f5f4b2638ec781eb398602b3
name: easyeffects
arch: src
version: 8.2.8
epoch: 0
release: 1.fc45
summary: Audio effects for PipeWire applications
url: https://github.com/wwmm/easyeffects
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/easyeffects-8.2.8-1.fc45.src.rpm
checksum_type: sha256
description:
  Limiters, compressor, reverberation, high-pass filter, low pass filter,
  equalizer many more effects for PipeWire applications.


pkgId: a94b195d8a4340b7e99f0a0424541c9ff615e479dd004b78f459137c29dc1165
name: easyloggingpp
arch: src
version: 9.97.1
epoch: 1
release: 19.fc45
summary: C++ logging library
url: https://github.com/abumq/easyloggingpp
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/easyloggingpp-9.97.1-19.fc45.src.rpm
checksum_type: sha256
description:
  Easylogging++ is an efficient logging library for C++ applications. It is
  extremely powerful, highly extendable and configurable to a user’s
  requirements. It provides the ability to write your own sinks (via featured
  referred as LogDispatchCallback). This library is currently used by hundreds of
  open-source projects on github and other open-source source control management
  sites.


pkgId: 660a7c5b5ac6023835260c1ddea293a4e86c068de24531d634f0b55540002288
name: easymock
arch: src
version: 5.6.0
epoch: 0
release: 3.fc45
summary: Easy mock objects
url: https://www.easymock.org
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-34.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/easymock-5.6.0-3.fc45.src.rpm
checksum_type: sha256
description:
  EasyMock provides Mock Objects for interfaces in JUnit tests by generating
  them on the fly using Java's proxy mechanism. Due to EasyMock's unique style
  of recording expectations, most refactorings will not affect the Mock Objects.
  So EasyMock is a perfect fit for Test-Driven Development.


pkgId: 892dba70bc046c866c9e96674c7a2ea29ea107cc7a9329a5e67e4f0e7a43bede
name: easyrpg-player
arch: src
version: 0.8.1.1
epoch: 0
release: 7.fc45
summary: Game interpreter for RPG Maker 2000/2003 and EasyRPG games
url: https://easyrpg.org
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/easyrpg-player-0.8.1.1-7.fc45.src.rpm
checksum_type: sha256
description:
  EasyRPG Player is a game interpreter for RPG Maker 2000/2003 and EasyRPG games.

  To play a game, run the "easyrpg-player" executable inside
  a RPG Maker 2000/2003 game project folder (same place as RPG_RT.exe).

rpm_license:
  GPL-3.0-or-later AND CC-BY-SA-4.0 AND (Unlicense OR MIT-0) AND (MIT AND CC0-1.0) AND BSD-3-Clause AND Baekmuk AND LicenseRef-Fedora-Public-Domain AND MIT AND GPL-2.0-or-later WITH Font-exception-2.0


pkgId: e10c91fc7c4e0872e88a1ab4b37a58505bb86f80219e73348de45a7958db3e30
name: easytag
arch: src
version: 2.4.3
epoch: 0
release: 30.fc45
summary: Tag editor for MP3, Ogg, FLAC and other music files
url: https://wiki.gnome.org/Apps/EasyTAG
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/easytag-2.4.3-30.fc45.src.rpm
checksum_type: sha256
description:
  EasyTAG is a utility for viewing, editing and writing the tags of MP4, MP3,
  MP2, FLAC, Ogg Opus, Ogg Speex, Ogg Vorbis, MusePack and Monkey's Audio files.


pkgId: 7e63246a6d54906f823c7e38a9a9e49d49867bb28f0b4954869888061f461880
name: eb
arch: src
version: 4.4.3
epoch: 0
release: 31.fc45
summary: Library for accessing Japanese CD-ROM electronic books
url: http://www.sra.co.jp/people/m-kasahr/eb/
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eb-4.4.3-31.fc45.src.rpm
checksum_type: sha256
description:
  EB Library is a C library for accessing CD-ROM books.
  EB Library supports to access CD-ROM books of
  EB, EBG, EBXA, EBXA-C, S-EBXA and EPWING formats.


pkgId: 42bafaea7387d2e8fb8849fa1220fb1401c4bd81bad52b09a811383a8877b54b
name: ebnetd
arch: src
version: 1.0
epoch: 0
release: 57.fc45
summary: EBNET protocol server
url: http://www.sra.co.jp/people/m-kasahr/ebnetd/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ebnetd-1.0-57.fc45.src.rpm
checksum_type: sha256
description:
  EBNET is a protocol to communicate to the EB library that is a C library
  for accessing "CD-ROM books".

  This package contains a EBNET protocol server.


pkgId: 9513fe967dbee167ce2b971e4fd85c81942610e08f540e414f3808d37c3f1ee7
name: ebtables
arch: src
version: 2.0.11
epoch: 0
release: 23.fc45
summary: Ethernet Bridge frame table administration tool
url: http://ebtables.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ebtables-2.0.11-23.fc45.src.rpm
checksum_type: sha256
description:
  Ethernet bridge tables is a firewalling tool to transparently filter network
  traffic passing a bridge. The filtering possibilities are limited to link
  layer filtering and some basic filtering on higher network layers.

  This tool is the userspace control for the bridge and ebtables kernel
  components (built by default in Fedora kernels).

  The ebtables tool can be used together with the other Linux filtering tools,
  like iptables. There are no known incompatibility issues.


pkgId: 1c5f8bea26d6cd9f0872c9d73fa7f72de0e1349ae8149ee8cc25ca928f627ee5
name: ebtree
arch: src
version: 6.0.8
epoch: 0
release: 28.fc45
summary: Elastic binary tree library
url: http://1wt.eu/articles/ebtree/
rpm_license: LicenseRef-Callaway-LGPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ebtree-6.0.8-28.fc45.src.rpm
checksum_type: sha256
description:
  ebtree is a binary search tree specially optimized to very
  frequently store, retrieve and delete discrete integer or binary
  data without having to deal with memory allocation.


pkgId: 2e1a289259959ff78d5d36ef9a3d295196276fa7c2ddb9ec67af42bc4a2abf45
name: ebumeter
arch: src
version: 0.4.2
epoch: 0
release: 19.fc45
summary: Loudness measurement according to EBU-R128
url: http://kokkinizita.linuxaudio.org/linuxaudio
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ebumeter-0.4.2-19.fc45.src.rpm
checksum_type: sha256
description:
  Loudness measurement according to EBU-R128. Presented at LAC 2011
  (thanks to Joern Nettingsmeier!). The only documentation available
  at the moment are the paper, the presentation, slides and the video
  of the LAC 2011 session.


pkgId: 645c1ca011d603e0413de78291f6f93b4a0d6a50a5c5dedf9851fcb8575993c3
name: ec2-instance-connect
arch: src
version: 1.1.17
epoch: 0
release: 8.fc45
summary: EC2 Instance Connect scripts
url: https://github.com/aws/aws-ec2-instance-connect-config
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ec2-instance-connect-1.1.17-8.fc45.src.rpm
checksum_type: sha256
description:
  This package contains the EC2 instance configuration and
  scripts necessary to enable AWS EC2 Instance Connect.


pkgId: ba147dfae97cb3c76f7f916bee59bd6060935bb2eb847109b1f82a2026019ce1
name: ec2-metadata
arch: src
version: 0.1.1
epoch: 0
release: 25.fc45
summary: EC2 instance metadata query tool
url: http://aws.amazon.com/code/1825
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ec2-metadata-0.1.1-25.fc45.src.rpm
checksum_type: sha256
description:
  A simple bash script that uses curl to query the EC2 instance metadata from
  within an instance running in Amazon EC2 or another cloud provider with a
  compatible metadata service.


pkgId: ec261ac3062c6ec4a8f41c0781b73e10150d65dc5f4400cd803289545b56923c
name: eccodes
arch: src
version: 2.48.0
epoch: 0
release: 1.fc45
summary: WMO data format decoding and encoding
url: https://confluence.ecmwf.int/display/ECC/ecCodes+Home
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eccodes-2.48.0-1.fc45.src.rpm
checksum_type: sha256
description:
  ecCodes is a package developed by ECMWF which provides an application
  programming interface and a set of tools for decoding and encoding messages
  in the following formats:

   *  WMO FM-92 GRIB edition 1 and edition 2
   *  WMO FM-94 BUFR edition 3 and edition 4
   *  WMO GTS abbreviated header (only decoding).

  A useful set of command line tools provide quick access to the messages. C,
  and Fortran 90 interfaces provide access to the main ecCodes functionality.

  ecCodes is an evolution of GRIB-API.  It is designed to provide the user with
  a simple set of functions to access data from several formats with a key/value
  approach.

  For GRIB encoding and decoding, the GRIB-API functionality is provided fully
  in ecCodes with only minor interface and behaviour changes. Interfaces for C,
  and Fortran 90 are all maintained as in GRIB-API.  However, the
  GRIB-API Fortran 77 interface is no longer available.

  In addition, a new set of functions with the prefix "codes_" is provided to
  operate on all the supported message formats. These functions have the same
  interface and behaviour as the "grib_" functions.

  A selection of GRIB-API tools has been included in ecCodes (ecCodes GRIB
  tools), while new tools are available for the BUFR (ecCodes BUFR tools) and
  GTS formats. The new tools have been developed to be as similar as possible
  to the existing GRIB-API tools maintaining, where possible, the same options
  and behaviour. A significant difference compared with GRIB-API tools is that
  bufr_dump produces output in JSON format suitable for many web based
  applications.


pkgId: e2fb176c6ec87b62c1d0b35b002c1dcf5cdc75f74a3e992f055c22a00ab6ca74
name: ecj
arch: src
version: 4.23
epoch: 1
release: 16.fc45
summary: Eclipse Compiler for Java
url: https://www.eclipse.org
rpm_license: EPL-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ecj-4.23-16.fc45.src.rpm
checksum_type: sha256
description:
  ECJ is the Java bytecode compiler of the Eclipse Platform.  It is also known as
  the JDT Core batch compiler.


pkgId: 95dd273b5d3d2a1f9ca3ce47e0208a8a39007d17ff71dc9e8d83a3a4c660d6b6
name: eclipse-swt
arch: src
version: 4.38
epoch: 1
release: 2.fc45
summary: Eclipse SWT: The Standard Widget Toolkit for GTK+
url: https://github.com/eclipse-platform/eclipse.platform.swt
rpm_license: EPL-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eclipse-swt-4.38-2.fc45.src.rpm
checksum_type: sha256
description:
  SWT is an open source widget toolkit for Java designed to provide
  efficient, portable access to the user-interface facilities of the
  operating systems on which it is implemented.


pkgId: 4a4ae0fcb9f5e47f080c9ca9c80526ea6ec5305ac7904b186d8c123b48570d9c
name: ecolier-court-fonts
arch: src
version: 20070702
epoch: 0
release: 51.fc45
summary: Écolier Court, a schoolchildren cursive Latin font family
rpm_license: OFL-1.1
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ecolier-court-fonts-20070702-51.fc45.src.rpm
checksum_type: sha256
description:
  The Écolier court font families were created by Jean-Marie Douteau to mimic the
  traditional cursive writing French children are taught in school.

  He kindly released two of them under the OFL, which are redistributed in this
  package.


pkgId: 56ec03485362d09bef9003c0137043a6fa5999df519229f3def13df2eae8f3af
name: ecryptfs-utils
arch: src
version: 111
epoch: 0
release: 45.fc45
summary: The eCryptfs mount helper and support libraries
url: https://launchpad.net/ecryptfs
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ecryptfs-utils-111-45.fc45.src.rpm
checksum_type: sha256
description:
  eCryptfs is a stacked cryptographic filesystem that ships in Linux
  kernel versions 2.6.19 and above. This package provides the mount
  helper and supporting libraries to perform key management and mount
  functions.

  Install ecryptfs-utils if you would like to mount eCryptfs.


pkgId: 4ced019a23c048ae7ff99a64e3969204713b63dc4293344a21fb2f7f32a70ab7
name: ed
arch: src
version: 1.22.5
epoch: 0
release: 3.fc45
summary: The GNU line editor
url: https://www.gnu.org/software/ed/
rpm_license: GPL-2.0-only AND GFDL-1.3-no-invariants-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ed-1.22.5-3.fc45.src.rpm
checksum_type: sha256
description:
  ed is a line-oriented text editor, used to create, display, and modify text
  files (both interactively and via shell scripts). For most purposes, ed has been
  replaced in normal usage by full-screen editors (emacs and vi, for example).


pkgId: 16ec22ad7dd5a8e397dabde949c1d52493f05d69d4ad559e394881c182aafa66
name: ed25519-java
arch: src
version: 0.3.0
epoch: 0
release: 28.fc45
summary: Implementation of EdDSA (Ed25519) in Java
url: https://github.com/str4d/ed25519-java
rpm_license: CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ed25519-java-0.3.0-28.fc45.src.rpm
checksum_type: sha256
description:
  This is an implementation of EdDSA in Java. Structurally, it
  is based on the ref10 implementation in SUPERCOP (see
  http://ed25519.cr.yp.to/software.html).

  There are two internal implementations:

  * A port of the radix-2^51 operations in ref10
    - fast and constant-time, but only useful for Ed25519.
  * A generic version using BigIntegers for calculation
    - a bit slower and not constant-time, but compatible
      with any EdDSA parameter specification.


pkgId: ab190e0d980903d15dcdff196a3c70b14ec60af47a71a4bee598acaefd7d06ab
name: edac-utils
arch: src
version: 0.18
epoch: 0
release: 49.fc45
summary: Userspace helper for kernel EDAC drivers
url: https://github.com/grondo/edac-utils
rpm_license: GPL-2.0-or-later AND FSFUL AND GPL-2.0-or-later WITH Autoconf-exception-macro AND X11
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/edac-utils-0.18-49.fc45.src.rpm
checksum_type: sha256
description:
  EDAC (Error Detection and Correction) is a set of Linux kernel modules that
  handle reporting of hardware-related errors. Currently these modules mainly
  handle detection of ECC memory errors for many x86 and x86-64 chipsets and PCI
  bus parity errors.

  The edac-utils project currently has three components: libedac, edac-util, and
  edac-ctl. The libedac library presents a standard API for reading EDAC error
  counts and other information from sysfs, and edac-util uses this API to
  generate standard reports from the commandline. The edac-ctl utility is a perl
  script which uses config files to load the appropriate EDAC driver for a given
  chipset and register motherboard DIMM labels if they are configured. An init
  script is also provided which uses edac-ctl to initialize EDAC at system
  startup.

  This is a metapackage that installs all three components.


pkgId: 4c3497a455a6b298de91ec219f1639c0c2b19b591c77ac16912dcbbabc1e4f80
name: edg-gridftp-client
arch: src
version: 1.2.9.2
epoch: 0
release: 43.fc45
summary: Command line clients to GridFTP libraries
url: http://jra1mw.cvs.cern.ch:8180/cgi-bin/jra1mw.cgi/edg-gridftp-client/
rpm_license: EUDatagrid
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/edg-gridftp-client-1.2.9.2-43.fc45.src.rpm
checksum_type: sha256
description:
  The edg-gridftp-client package is a thin command line interface on top
  of the GridFTP libraries supplied by Globus.  They do, however,
  represent a useful set of commands to do basic management of files on
  a GridFTP server.

  The commands provided are:

    edg-gridftp-exists   test if a file/directory exists on the server
    edg-gridftp-mkdir    create a directory on the server
    edg-gridftp-rmdir    remove a directory from a server
    edg-gridftp-rm       remove a file from a server
    edg-gridftp-ls       list files/directories on a server
    edg-gridftp-rename   rename a file/directory on a server


pkgId: 2fabb2fe13b825c4feaef8c499d66af4bfe4fc021016c3e801724b00325abcac
name: edg-mkgridmap
arch: src
version: 4.0.6
epoch: 0
release: 9.fc45
summary: A tool to build the grid map-file from VO servers
url: https://gitlab.cern.ch/curios/edg-mkgridmap
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-35.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/edg-mkgridmap-4.0.6-9.fc45.src.rpm
checksum_type: sha256
description:
  edg-mkgridmap is a tool to build the grid map-file from VO servers,
  taking into account both VO and local policies.


pkgId: 75031d440c0954e1c66b4f56b6662d30497814b35d946d28e53782511a3a1e1b
name: edgar
arch: src
version: 1.38
epoch: 0
release: 3.fc45
summary: A platform game
url: https://www.parallelrealities.co.uk/games/edgar/
rpm_license: GPL-2.0-or-later AND CC-BY-3.0 AND CC-BY-SA-3.0 AND CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/edgar-1.38-3.fc45.src.rpm
checksum_type: sha256
description:
  When his father fails to return home after venturing out one dark and stormy
  night, Edgar fears the worst: he has been captured by the evil sorcerer who
  lives in a fortress beyond the forbidden swamp.

  Donning his armor, Edgar sets off to rescue him, but his quest will not be
  easy...


pkgId: e46d8b4bfae18c18389a15bb63d0b789eea60b3c6f106920fcb3ee0ab69d51eb
name: editline
arch: src
version: 1.17.1
epoch: 0
release: 17.fc45
summary: A small compatible replacement for readline
url: https://troglobit.com/projects/editline/
rpm_license: Spencer-94
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/editline-1.17.1-17.fc45.src.rpm
checksum_type: sha256
description:
  This is a line editing library for UNIX. It can be linked into almost
  any program to provide command line editing and history. It is call
  compatible with the FSF readline library, but is a fraction of the
  size (and offers fewer features).


pkgId: 5b77cff40dc3cbe10c773d1065a4f53595e15930f17d349770ffa9a4c2dc9d0c
name: editorconfig
arch: src
version: 0.12.11
epoch: 0
release: 2.fc45
summary: Parser for EditorConfig files written in C
url: https://github.com/editorconfig/editorconfig-core-c
rpm_license: BSD-2-Clause AND BSD-3-Clause AND BSD-1-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/editorconfig-0.12.11-2.fc45.src.rpm
checksum_type: sha256
description:
  EditorConfig makes it easy to maintain the correct coding style when
  switching between different text editors and between different projects.
  The EditorConfig project maintains a file format and plugins for various
  text editors which allow this file format to be read and used by those
  editors.


pkgId: d0355a0950983fbefdb2b861560e606cf7bedee8047ed4c9bb25a2ec4e674f6b
name: editorconfig-emacs
arch: src
version: 0.10.1
epoch: 0
release: 6.fc45
summary: EditorConfig plugin for emacs
url: https://github.com/editorconfig/editorconfig-emacs
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/editorconfig-emacs-0.10.1-6.fc45.src.rpm
checksum_type: sha256
description:
  This is the EditorConfig plugin for emacs.  With this plugin
  installed, emacs will automatically respect coding style settings
  found in an .editorconfig file.


pkgId: f656096e1a4ff6c4f60e208a25c74556fd478e1c0293b50afed72086bcccb400
name: editres
arch: src
version: 1.0.9
epoch: 0
release: 6.fc45
summary: X11 utility to view and edit application resources
url: https://www.x.org
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/editres-1.0.9-6.fc45.src.rpm
checksum_type: sha256
description:
  editres is a tool that allows users and application developers to view
  the full widget hierarchy of any Xt Toolkit application that speaks the
  Editres protocol  In addition, editres will help the user construct
  resource specifications, allow the user to apply the resource to
  the application and view the results dynamically.


pkgId: 1c64c5c3da1431100209a8d02c7473665844ec2d62b6da73bb17a0903d12e325
name: edk2
arch: src
version: 20260508
epoch: 0
release: 14.fc45
summary: UEFI firmware for 64-bit virtual machines
url: http://www.tianocore.org
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/edk2-20260508-14.fc45.src.rpm
checksum_type: sha256
description:
  EDK II is a modern, feature-rich, cross-platform firmware development
  environment for the UEFI and PI specifications. This package contains sample
  64-bit UEFI firmware builds for QEMU and KVM.

rpm_license:
  Apache-2.0 AND (BSD-2-Clause OR GPL-2.0-or-later) AND BSD-2-Clause-Patent AND BSD-3-Clause AND BSD-4-Clause AND ISC AND MIT AND LicenseRef-Fedora-Public-Domain


pkgId: 7908c4508269f4f9ff46211004565645b20697c68b8e36f1b813d7a64ddf14b2
name: edwin-fonts
arch: src
version: 0.54
epoch: 0
release: 12.fc45
summary: A text font for musical scores
url: https://musescore.org/
rpm_license: OFL-1.1-RFN
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/edwin-fonts-0.54-12.fc45.src.rpm
checksum_type: sha256
description:
  In 1999-2000, URW++ Design and Development GmbH released Type 1
  implementations of the Core 35 fonts under the GNU General Public License
  (GPL) and the Aladdin Ghostscript Free Public License (AFPL).  In 2009, URW++
  additionally released the same fonts under the LaTeX Project Public License
  (LPPL).

  In 2016, URW++ released a major Version 2.0 upgrade to the Core 35 fonts.
  This version is an extensive reworking of the original Core 35 fonts, with
  improved font outlines, and greatly extended character sets, including
  Cyrillic and Greek.  Also, some font names were changed.  Version 2.0 was
  released in Type 1, OpenType-CFF and OpenType-TTF formats.  URW++ released
  Version 2.0 of the fonts under the GNU Affero General Public License, Version
  3 (AGPL) with an exemption.

  In 2017, URW++ additionally released the same Version 2.0 fonts under the
  LaTeX Project Public License (LPPL) Version 1.3c, and under the SIL Open Font
  License (OFL), Version 1.1, without a "Reserved Font Name" clause.

  In 2020, MuseScore BVBA released the Edwin font family, a renamed version of
  the C059 font family (Roman, Italic, Bold & Bold Italic) from the Core 35 font
  set.  This was done in order to make modifications that suit the requirements
  of the open source notation software, MuseScore.  It is released under the SIL
  Open Font License (OFL) only.


pkgId: 6e2850f2a7e46291b718a66f60be4b750246c15f5c1a265325842fa8c2ee2e41
name: eegdev
arch: src
version: 0.2
epoch: 0
release: 35.fc45
summary: Library to acquire data from various EEG recording devices
url: https://archiveweb.epfl.ch/cnbi.epfl.ch/index.html%3Fp=228.html
rpm_license: LGPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eegdev-0.2-35.fc45.src.rpm
checksum_type: sha256
description:
  eegdev is a library that provides a unified interface for accessing various EEG
  (and other biosignals) acquisition systems. This interface has been designed to
  be both flexible and efficient. The device specific part is implemented by the
  mean of plugins which makes adding new device backend fairly easy even if the
  library does not support them yet officially.

  The core library not only provides to users a unified and consistent interfaces
  to the acquisition device but it also provides many functionalities to the
  device backends (plugins) ranging from configuration to data casting and scaling
  making writing new device backend an easy task.


pkgId: 9ec3af35173eb13fc98376b749d07d94067102bac14b209842bda5b154bcfdfb
name: efax
arch: src
version: 0.9a
epoch: 0
release: 48.001114.fc45
summary: A program for faxing using a Class 1, 2 or 2.0 fax modem
url: http://www.cce.com/efax/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/efax-0.9a-48.001114.fc45.src.rpm
checksum_type: sha256
description:
  Efax is a small ANSI C/POSIX program that sends and receives faxes
  using any Class 1, 2 or 2.0 fax modem.

  You need to install efax if you want to send faxes and you have a
  Class 1, 2 or 2.0 fax modem.


pkgId: a076fad71fea8454515b4e773e95ad2304a9d96132ad6f9962f1b2b15fcd95c6
name: efibootmgr
arch: src
version: 18
epoch: 0
release: 13.fc45
summary: EFI Boot Manager
url: https://github.com/rhboot/efibootmgr/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/efibootmgr-18-13.fc45.src.rpm
checksum_type: sha256
description:
  efibootmgr displays and allows the user to edit the Intel Extensible
  Firmware Interface (EFI) Boot Manager variables.  Additional
  information about EFI can be found at https://uefi.org/.


pkgId: c090d13868938b6b4cc357ad1192b3e534464990e123e977fb3fcf8dff51bd46
name: efifs
arch: src
version: 1.12
epoch: 0
release: 1.fc45
summary: Free software EFI/UEFI standalone file system drivers
url: https://efi.akeo.ie/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/efifs-1.12-1.fc45.src.rpm
checksum_type: sha256
description:
  Free software EFI/UEFI standalone file system drivers, based on the GRUB
  2.0 read-only drivers: AFFS (Amiga Fast FileSystem), BFS (BeOS FileSystem),
  btrfs, exFAT, ext2/ext3/ext4, EROFS, F2FS, HFS and HFS+ (Mac OS, including
  compression support), ISO9660, JFS (Journaled FileSystem), nilfs2, NTFS
  (including compression support), ReiserFS, SFS (Amiga Smart FileSystem),
  UDF, UFS/FFS, UFS2/FFS2, XFS, ZFS and more.


pkgId: afbb21c0339522e079c3251017aaf5bcb163dc2e8531b592bd8451b6af7dc817
name: efitools
arch: src
version: 1.9.2
epoch: 0
release: 21.fc45
summary: Tools to manipulate EFI secure boot keys and signatures
url: https://git.kernel.org/pub/scm/linux/kernel/git/jejb/efitools.git
rpm_license: GPL-2.0-only and LGPL-2.1-or-later and BSD-2-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/efitools-1.9.2-21.fc45.src.rpm
checksum_type: sha256
description:
  This package installs a variety of tools for manipulating keys and binary
  signatures on UEFI secure boot platforms. The tools provide access to the keys
  and certificates stored in the secure variables of the UEFI firmware, usually
  in the NVRAM area.


pkgId: faf2d6b3ffd3053314010124e19649dce7e2ac24f28bc691f40d706106a59e8e
name: efl
arch: src
version: 1.28.1
epoch: 0
release: 8.fc45
summary: Collection of Enlightenment libraries
url: http://enlightenment.org/
rpm_license: LicenseRef-Callaway-BSD AND LicenseRef-Callaway-LGPLv2+ AND GPL-2.0-only AND Zlib
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/efl-1.28.1-8.fc45.src.rpm
checksum_type: sha256
description:
  EFL is a collection of libraries for handling many common tasks a
  developer may have such as data structures, communication, rendering,
  widgets and more.


pkgId: 5ff1adff454929eb811664109c9a1a2d4207729c486bb881b9955d204fa7f835
name: efont-unicode-bdf
arch: src
version: 0.4.2
epoch: 0
release: 43.fc45
summary: Unicode font by Electronic Font Open Laboratory
description:
  This package provides Unicode bitmap fonts provided by
  Electronic Font Open Laboratory.

url: http://openlab.jp/efont/unicode/
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/efont-unicode-bdf-0.4.2-43.fc45.src.rpm
checksum_type: sha256
rpm_license:
  LicenseRef-Callaway-BSD AND LicenseRef-Callaway-Public-Domain AND Baekmuk AND LicenseRef-Callaway-MIT


pkgId: a0167d9a08b0aa79893d3b5a4f7719b9176a003309f8867d6afbb1bedf5ceee4
name: egd
arch: src
version: 0.9
epoch: 0
release: 36.fc45
summary: Entropy Gathering Daemon
url: http://egd.sourceforge.net/
rpm_license: GPL-1.0-or-later OR LicenseRef-Callaway-MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/egd-0.9-36.fc45.src.rpm
checksum_type: sha256
description:
  EGD is an Entropy Gathering Daemon meant to be used on systems that can run GPG
  but which don't have a convenient (or reliable) source of random bits. It is a
  regular user-space program that sits around, running programs like 'w' and
  'last' and 'vmstat', collecting the randomness (or at least the
  unpredictability) inherent in the output of these system statistics programs
  when used on a reasonably busy system. It slowly stirs the output of these
  gathering programs into a pool of entropy, much like the linux kernel device,
  and allows other programs to read out random bits from this pool.


pkgId: d6d46e00fb3b870ac3a2937fa5943d8ff780d2d832b912c76fcd5ef15a694504
name: eggdrop
arch: src
version: 1.10.1
epoch: 0
release: 6.fc45
summary: World's most popular Open Source IRC bot
url: https://www.eggheads.org/
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eggdrop-1.10.1-6.fc45.src.rpm
checksum_type: sha256
description:
  Eggdrop is the world's most popular Open Source IRC bot, designed
  for flexibility and ease of use. It is extendable with Tcl scripts
  and/or C modules, has support for the big five IRC networks and is
  able to form botnets, share partylines and userfiles between bots.

rpm_license:
  GPL-2.0-or-later AND GPL-2.0-only AND BSD-3-Clause AND ISC AND LicenseRef-Fedora-Public-Domain AND MIT


pkgId: af5fdd5e86bc6e149230b9fdd4f476a00069541d32507cbb01a53106c0fc8f10
name: egl-wayland
arch: src
version: 1.1.21
epoch: 0
release: 3.fc45
summary: EGLStream-based Wayland external platform
url: https://github.com/NVIDIA/egl-wayland
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/egl-wayland-1.1.21-3.fc45.src.rpm
checksum_type: sha256
description:
  EGL External Platform library to add client-side Wayland support to EGL on top
  of EGLDevice and EGLStream families of extensions.

  This library implements an EGL External Platform interface to work along with
  EGL drivers that support the external platform mechanism.


pkgId: 4febbf85fec33d88bc5724f4083e018d7284dd453ae0a7d43c4111d6d3ceb57f
name: egl-wayland2
arch: src
version: 1.0.1
epoch: 0
release: 2.fc45
summary: Dma-buf-based Wayland external platform library
url: https://github.com/NVIDIA/egl-wayland2
rpm_license: Apache-2.0 and GPL-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/egl-wayland2-1.0.1-2.fc45.src.rpm
checksum_type: sha256
description:
  This is a new implementation of the EGL External Platform Library for Wayland
  (EGL_KHR_platform_wayland), using the NVIDIA driver's new platform surface
  interface, which simplifies a lot of the library and improves window resizing.


pkgId: bc18babb3c07494736b53bff30acd7cdaed0111de49ecb1303da7aa022bf5e0d
name: egl-x11
arch: src
version: 1.0.5
epoch: 0
release: 2.fc45
summary: NVIDIA XLib and XCB EGL Platform Library
url: https://github.com/NVIDIA/egl-x11
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/egl-x11-1.0.5-2.fc45.src.rpm
checksum_type: sha256
description:
  This is an EGL platform library for the NVIDIA driver to support XWayland via
  xlib (using EGL_KHR_platform_x11) or xcb (using EGL_EXT_platform_xcb).


pkgId: a2a285a6c35331e2521a020b20064fe93ad0b85d12f59fcfd07fc7e04cebe17d
name: eiciel
arch: src
version: 0.10.1
epoch: 0
release: 6.fc45
summary: Graphical editor for ACLs and xattr
url: http://rofi.roger-ferrer.org/eiciel
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eiciel-0.10.1-6.fc45.src.rpm
checksum_type: sha256
description:
  Graphical editor for access control lists (ACLs) and extended attributes
  (xattr), either as an extension within Nautilus, or as a standalone
  utility.


pkgId: 8367f7ab938200f8cbc8fa003297ea8704f746623fe58acab74ad5df34cbe042
name: eiskaltdcpp
arch: src
version: 2.4.2
epoch: 0
release: 26.fc45
summary: Direct Connect client
url: https://github.com/eiskaltdcpp/eiskaltdcpp
rpm_license: GPL-3.0-or-later AND LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eiskaltdcpp-2.4.2-26.fc45.src.rpm
checksum_type: sha256
description:
  EiskaltDC++ is a cross-platform program that uses the Direct Connect
  (DC aka NMDC) and Advanced Direct Connect (ADC) protocols. It is compatible
  with DC++, AirDC++, FlylinkDC++ and other DC clients. EiskaltDC++ also
  interoperates with all common DC hub software.


pkgId: 05ca43c72f504f5196d05162c9b9ad33c22a36cae9aa31b74e21c51fedcfed87
name: ektype-baloo-2-fonts
arch: src
version: 1.640
epoch: 0
release: 4.fc45
summary: Baloo 2 Devanagari fonts
url: https://ektype.in/baloo-family.html
rpm_license: OFL-1.1
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ektype-baloo-2-fonts-1.640-4.fc45.src.rpm
checksum_type: sha256
description:
  The Baloo 2 project consists of nine font families with unique local names for
  each of the nine Indic scripts. Each family supports one Indic script plus
  Latin, Latin Extended, and Vietnamese.

  – Baloo 2 for Devanagari
  – Baloo Bhai 2 for Gujarati
  – Baloo Bhaina 2 for Odia
  – Baloo Chettan 2 for Malayalam
  – Baloo Da 2 for Bengali
  – Baloo Paaji 2 for Gurmukhi
  – Baloo Tamma 2 for Kannada
  – Baloo Tammudu 2 for Telugu
  – Baloo Thambi 2 for Tamil

  It took a team of committed type designers to rear Baloo and raise it to be the
  typeface we love. The Gurmukhi is designed by Shuchita Grover; Bangla by Noopur
  Datye and Sulekha Rajkumar; Odia by Yesha Goshar, Manish Minz, and Shuchita
  Grover; Gujarati by Noopur Datye and Supriya Tembe; Kannada by Divya Kowshik
  and Shuchita Grover; Telugu by Maithili Shingre and Omkar Shende; Malayalam by
  Maithili Shingre and Unnati Kotecha; and Tamil by Aadarsh Rajan. Baloo
  Devanagari and Latin are collaboratively designed by Ek Type. Font engineering
  and type design assistance by Girish Dalvi.
  Devanagari and latin fonts.


pkgId: 04de640a51991c7a52c26b888bd9dc4b992372fc45ab8ec04106a26d495781d6
name: ektype-mukta-fonts
arch: src
version: 2.538
epoch: 0
release: 21.fc45
summary: Free Indian truetype/open type fonts
url: https://github.com/EkType/Mukta
rpm_license: LicenseRef-Callaway-OFL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-44.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ektype-mukta-fonts-2.538-21.fc45.src.rpm
checksum_type: sha256
description:
  Mukta is a typeface available in
  seven weights, supporting Devanagari, Gujarati, Tamil and Latin scripts.


pkgId: 0c43f37002b7ec95592716f7cfa944d073ccf887adbb69e34ecb72403825e2ed
name: electron-cash
arch: src
version: 4.4.6
epoch: 0
release: 1.fc45
summary: A lightweight Bitcoin Cash client
url: https://electroncash.org/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/electron-cash-4.4.6-1.fc45.src.rpm
checksum_type: sha256
description:
  Electron Cash is an easy to use Bitcoin Cash client. It protects you from losing
  coins in a backup mistake or computer failure, because your wallet can
  be recovered from a secret phrase that you can write on paper or learn
  by heart. There is no waiting time when you start the client, because
  it does not download the Bitcoin block chain.


pkgId: acd17087fbbf097602c5651e6e75fe668391110097a003f55511b5e3a28a7f28
name: electronics-menu
arch: src
version: 1.0
epoch: 0
release: 39.fc45
summary: Electronics Menu for the Desktop
url: http://geda.seul.org/
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/electronics-menu-1.0-39.fc45.src.rpm
checksum_type: sha256
description:
  The programs from the category Electronics are normally located
  in the Edutainment directory.
  This Package adds a Electronics menu to the xdg menu structure.

  electronics-menu is listed among Fedora Electronic Lab (FEL) packages.


pkgId: fe5b4fbd8ca81315cb3ec0d33ba5dc08a9f3388a636a4eb351dc3aa90d7eba68
name: electrum
arch: src
version: 4.5.8
epoch: 0
release: 12.fc45
summary: A lightweight Bitcoin Client
url: https://electrum.org/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/electrum-4.5.8-12.fc45.src.rpm
checksum_type: sha256
description:
  Electrum is an easy to use Bitcoin client. It protects you from losing
  coins in a backup mistake or computer failure, because your wallet can
  be recovered from a secret phrase that you can write on paper or learn
  by heart. There is no waiting time when you start the client, because
  it does not download the Bitcoin block chain.


pkgId: 663bd70831b78c87df1f5f48fcab6d74c1d4a08f2909cfcbdcbbab1a425a97a9
name: elementary-xfce-icon-theme
arch: src
version: 0.22
epoch: 0
release: 3.fc45
summary: Icons for Xfce based on the elementary Project Icon Theme
url: https://github.com/shimmerproject/elementary-xfce
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/elementary-xfce-icon-theme-0.22-3.fc45.src.rpm
checksum_type: sha256
description:
  This is an icon-theme maintained with Xfce in mind,
  but it supports other desktops like Gnome3 as well.
  It's a fork of the upstream elementary-project,
  which took place because the team decided to
  drop a lot of desktop-specific symlinks.
  This icon-theme is supposed to keep everything
  working, but we'll still pull new icons from upstream
  and integrate them occasionally.


pkgId: 89cafc8cbf277b76eae314703f5ed82c414b35d0702d88f86d37ae2bb51995c5
name: elfio
arch: src
version: 3.12
epoch: 0
release: 9.fc45
summary: C++ library for reading and generating ELF files
url: http://elfio.sourceforge.net/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/elfio-3.12-9.fc45.src.rpm
checksum_type: sha256
description:
  ELFIO is a small, header-only C++ library that provides a simple interface for
  reading and generating files in ELF binary format.

  It is used as a standalone library - it is not dependent on any other product
  or project. Adhering to ISO C++, it compiles on a wide variety of
  architectures and compilers.

  While the library is easy to use, some basic knowledge of the ELF binary
  format is required. Such Information can easily be found on the Web.


pkgId: 7d00af5fb137dfcccac959c34a59aa8b265ba60fb4a94c0d3adaa47d67752d8f
name: elfutils
arch: src
version: 0.195
epoch: 0
release: 3.fc45
summary: A collection of utilities and DSOs to handle ELF files and DWARF data
url: http://elfutils.org/
rpm_license: GPL-3.0-or-later AND (GPL-2.0-or-later OR LGPL-3.0-or-later) AND GFDL-1.3-no-invariants-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/elfutils-0.195-3.fc45.src.rpm
checksum_type: sha256
description:
  Elfutils is a collection of utilities, including stack (to show
  backtraces), nm (for listing symbols from object files), size
  (for listing the section sizes of an object or archive file),
  strip (for discarding symbols), readelf (to see the raw ELF file
  structures), elflint (to check for well-formed ELF files) and
  elfcompress (to compress or decompress ELF sections).


pkgId: c2e4088023f4c1ed2ce520de2b3929b15e7f4025336add5402d718ac6e34615d
name: elinks
arch: src
version: 0.20.0
epoch: 0
release: 1.fc45
summary: A text-mode Web browser
url: https://github.com/rkd77/elinks
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/elinks-0.20.0-1.fc45.src.rpm
checksum_type: sha256
description:
  Elinks is a text-based Web browser. Elinks does not display any images,
  but it does support frames, tables and most other HTML tags. Elinks'
  advantage over graphical browsers is its speed--Elinks starts and exits
  quickly and swiftly displays Web pages.


pkgId: bb7ba2302f723894a02b7fd995950573d270ec76d89cfa86abd63d341d0ed594
name: elixir
arch: src
version: 1.20.3
epoch: 0
release: 1.fc45
summary: A modern approach to programming for the Erlang VM
url: https://elixir-lang.org/
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/elixir-1.20.3-1.fc45.src.rpm
checksum_type: sha256
description:
  Elixir is a programming language built on top of the Erlang VM.
  As Erlang, it is a functional language built to support distributed,
  fault-tolerant, non-stop applications with hot code swapping.


pkgId: 856112d0a292ec8ef275ed77a58ff40277ff9426e67bbc58971bebf05a8a2adb
name: elk
arch: src
version: 11.0.2
epoch: 0
release: 1.fc45
summary: An all-electron full-potential linearised augmented-plane wave code
url: http://elk.sourceforge.net/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/elk-11.0.2-1.fc45.src.rpm
checksum_type: sha256
description:
  An all-electron full-potential linearised augmented-plane wave (FP-LAPW) code
  with many advanced features. Written originally at
  Karl-Franzens-Universität Graz as a milestone of the EXCITING EU Research and
  Training Network, the code is designed to be as simple as possible so that new
  developments in the field of density functional theory (DFT) can be added
  quickly and reliably.


pkgId: c43f01fc635c1c2ef54ae00e4e7d448193d49a8923d3fb72130f41b0bfb4024f
name: ell
arch: src
version: 0
epoch: 0
release: 42.fc45
summary: Header-only C++ library to write EBNF grammars
url: http://code.google.com/p/ell/
rpm_license: LGPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ell-0-42.fc45.src.rpm
checksum_type: sha256
description:
  Embedded LL library is pure-header library to write EBNF grammars as C++ code.
  It eases the development of parser or similar applications, while removing the
  need to write a lexer.


pkgId: 43d84b8c6d2d0a64c649134e4b31eb24fca6e5d175a3b10fa81e3c889848f549
name: elph
arch: src
version: 1.0.1
epoch: 0
release: 39.fc45
summary: Tool to find motifs in a set of DNA or protein sequences
url: http://www.cbcb.umd.edu/software/ELPH/
rpm_license: ClArtistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/elph-1.0.1-39.fc45.src.rpm
checksum_type: sha256
description:
  ELPH is a general-purpose Gibbs sampler for finding motifs in a set of
  DNA or protein sequences. The program takes as input a set containing
  anywhere from a few dozen to thousands of sequences, and searches
  through them for the most common motif, assuming that each sequence
  contains one copy of the motif.


pkgId: 64c3f5e25ab590b3a4c729761c5b7a8e633826517dc8c156830478d7821dbb5a
name: emacs
arch: src
version: 30.2
epoch: 1
release: 36.fc45
summary: GNU Emacs text editor
url: https://www.gnu.org/software/emacs/
rpm_license: GPL-3.0-or-later AND CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-30.2-36.fc45.src.rpm
checksum_type: sha256
description:
  GNU Emacs is a powerful, customizable, self-documenting, modeless text
  editor. It contains special code editing features, a scripting language
  (elisp), and the capability to read mail, news, and more without leaving
  the editor.


pkgId: 65aef6fe63d995461624a4ab33b98e185d50b6ed20d022a97eb6e5f3df9ea1a1
name: emacs-auctex
arch: src
version: 14.1.2
epoch: 0
release: 3.fc45
summary: Enhanced TeX modes for Emacs
url: https://www.gnu.org/software/auctex/
rpm_license: GPL-3.0-or-later AND FSFAP AND GFDL-1.3-no-invariants-or-later AND Knuth-CTAN
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-auctex-14.1.2-3.fc45.src.rpm
checksum_type: sha256
description:
  AUCTeX is an extensible package that supports writing and formatting TeX files
  for most variants of Emacs.

  AUCTeX supports many different TeX macro packages, including AMS-TeX, LaTeX,
  Texinfo and basic support for ConTeXt.  Documentation can be found under
  /usr/share/doc, e.g. the reference card (tex-ref.pdf) and the FAQ.  The AUCTeX
  manual is available in Emacs info (C-h i d m AUCTeX RET).  On the AUCTeX home
  page, we provide manuals in various formats.

  AUCTeX includes preview-latex support which makes LaTeX a tightly integrated
  component of your editing workflow by visualizing selected source chunks (such
  as single formulas or graphics) directly as images in the source buffer.

  This package is for GNU Emacs.


pkgId: de3452099aaec058a838244efd1f9cf0997946da7a89619dd314f31755593de7
name: emacs-auto-complete
arch: src
version: 1.5.1
epoch: 0
release: 16.fc45
summary: Emacs auto-complete package
url: https://github.com/auto-complete/auto-complete/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-auto-complete-1.5.1-16.fc45.src.rpm
checksum_type: sha256
description:
  Auto-Complete is an intelligent auto-completion extension for Emacs. It extends
  the standard Emacs completion interface and provides an environment that allows
  users to concentrate more on their own work.


pkgId: d32277a2572ab2ed001303584bc86d4a0e725f53df972fa3f3cb788acc2ec9e9
name: emacs-bbdb
arch: src
version: 3.2.2b
epoch: 1
release: 13.20220729git1b121e9.fc45
summary: A contact management utility for use with Emacs
url: http://savannah.nongnu.org/projects/bbdb/
rpm_license: GPL-3.0-or-later AND GFDL-1.3-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-bbdb-3.2.2b-13.20220729git1b121e9.fc45.src.rpm
checksum_type: sha256
description:
  BBDB is the Insidious Big Brother Database contact manager for GNU
  Emacs.  It provides an address book for email and snail mail
  addresses, phone numbers and the like.  It can be linked with various
  Emacs mail clients (Message and Mail mode, Rmail, Gnus, MH-E, and VM).
  BBDB is fully customizable.


pkgId: 01c30ca307360ffecc4417e1c2bb858386089e0d3bcc0e58db4d13dee248f2d5
name: emacs-blacken
arch: src
version: 0
epoch: 0
release: 0.19.20210406git880cf50.fc45
summary: Python Black for Emacs
url: https://github.com/pythonic-emacs/blacken
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-blacken-0-0.19.20210406git880cf50.fc45.src.rpm
checksum_type: sha256
description:
  Blacken uses black to format a Python buffer. It can be called explicitly on a
  certain buffer, but more conveniently, a minor-mode 'blacken-mode' is provided
  that turns on automatically running black on a buffer before saving.

  To automatically format all Python buffers before saving, add the function
  blacken-mode to python-mode-hook:

    (add-hook 'python-mode-hook 'blacken-mode)


pkgId: 7f4bb5af932160847d319e1a3312cc99f8c494a310086c7280901f0ad6581677
name: emacs-color-theme
arch: src
version: 6.6.0
epoch: 0
release: 34.fc45
summary: Color themes for Emacs
url: http://www.nongnu.org/color-theme
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-40.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-color-theme-6.6.0-34.fc45.src.rpm
checksum_type: sha256
description:
  Emacs Color Themes is an add-on package for GNU Emacs.
  It provides a lot of different color themes to skin your Emacs greatly
  improving the editing experience. It also includes a neat framework to
  help you creating new themes from your current emacs customization's.
  Also features an easy way to share your custom themes with the world.


pkgId: c1ce74477b64f0bb7482785efa4c219e8049e12fd1a27efe6b73f9f37c7182a6
name: emacs-common-ddskk
arch: src
version: 17.1
epoch: 0
release: 11.fc45
summary: Daredevil SKK - Simple Kana to Kanji conversion program for Emacs
url: http://openlab.ring.gr.jp/skk/main.html
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-common-ddskk-17.1-11.fc45.src.rpm
checksum_type: sha256
description:
  Daredevil SKK is a branch of SKK (Simple Kana to Kanji conversion program,
  an input method of Japanese). It forked from the maintrunk, SKK version 10.56.
  It consists of a simple core and many optional programs which provide extensive
  features, however, our target is to more simplify core, and more expand its
  optional features.

  This package does not include dictionaries or a skkserver. Please install them
  separately.


pkgId: 8eb67551f2173ad54acd25b6dddba8f725f5c7bd351afe05116d122257856703
name: emacs-common-proofgeneral
arch: src
version: 4.5
epoch: 0
release: 15.20240912git1ffca70.fc45
summary: Emacs mode for standard interaction interface for proof assistants
url: https://proofgeneral.github.io/
rpm_license: GPL-3.0-or-later AND CC-BY-SA-3.0 AND CC-BY-SA-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-28.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-common-proofgeneral-4.5-15.20240912git1ffca70.fc45.src.rpm
checksum_type: sha256
description:
  Proof General is a generic front-end for proof assistants (also known as
  interactive theorem provers) based on Emacs.

  Proof General allows one to edit and submit a proof script to a proof
  assistant in an interactive manner:
  - It tracks the goal state, and the script as it is submitted, and allows for
    easy backtracking and block execution.
  - It adds toolbars and menus to Emacs for easy access to proof assistant
    features.
  - It integrates with Emacs Unicode support for some provers to provide output
    using proper mathematical symbols.
  - It includes utilities for generating Emacs tags for proof scripts, allowing
    for easy navigation.

  Proof General supports a number of different proof assistants (Isabelle, Coq,
  PhoX, and LEGO to name a few) and is designed to be easily extendable to work
  with others.


pkgId: 355b96caa43c787c131b051aeb35c1a6a3d3316b4471e88964d2d316eceba44e
name: emacs-common-riece
arch: src
version: 8.0.0
epoch: 0
release: 32.fc45
summary: Yet Another IRC Client for Emacs and XEmacs
url: http://riece.nongnu.org
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-common-riece-8.0.0-32.fc45.src.rpm
checksum_type: sha256
description:
  Riece is an IRC client for Emacs.

  Riece provides the following features:

  - Several IRC servers may be used at the same time.
  - Essential features can be built upon the extension framework (called
    "add-on") capable of dependency tracking.
  - Installation is easy.  Riece doesn't depend on other packages.
  - Setup is easy.  Automatically save/restore the configuration.
  - Riece uses separate windows to display users, channels, and
    dialogues.  The user can select the window layout.
  - Step-by-step instructions (in info format) are included.
  - Mostly compliant with RFC 2812.


pkgId: c3bafea06ec97bd4a64c273b9661ea01831d55d6e2a3d67d1bbae2c0a83e31d8
name: emacs-common-tuareg
arch: src
version: 3.0.1
epoch: 0
release: 16.fc45
summary: Emacs mode for editing OCaml code
url: https://github.com/ocaml/tuareg
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-common-tuareg-3.0.1-16.fc45.src.rpm
checksum_type: sha256
description:
  Tuareg is an OCaml mode for GNU Emacs.  It handles automatic indentation
  of Objective Caml and Caml Light code.  Key parts of the code are
  highlighted using Font-Lock.  Support to run an interactive Caml
  toplevel and debbuger is provided.

  This package contains the common files.  Install emacs-tuareg to get
  the complete package.


pkgId: 57425ce9de3c541ee78b57712ce29a49966b59727f9d1f5bd574b04df2fe8471
name: emacs-common-w3m
arch: src
version: 1.4.632~0.e3b87d61
epoch: 0
release: 8.fc45
summary: W3m interface for Emacsen
url: http://emacs-w3m.namazu.org/
rpm_license: GPL-2.0-or-later AND GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-common-w3m-1.4.632~0.e3b87d61-8.fc45.src.rpm
checksum_type: sha256
description:
  W3m is a text based World Wide Web browser with IPv6 support. It
  features excellent support for tables and frames. It can be used as a
  standalone pager such as lv, less, and more.

  This package contains the files common to both the GNU Emacs and XEmacs
  Emacs-w3m packages.


pkgId: f23bb6d2aab2c065f04f4ff5404254adb50107fe716cb93383c2af84d8096ac4
name: emacs-company-mode
arch: src
version: 1.0.2
epoch: 0
release: 6.fc45
summary: Modular in-buffer completion framework for Emacs
url: https://company-mode.github.io/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-company-mode-1.0.2-6.fc45.src.rpm
checksum_type: sha256
description:
  Company is a text completion framework for Emacs.  The name stands for
  "complete anything".  It uses pluggable back-ends and front-ends to retrieve
  and display completion candidates.  It comes with several back-ends such as
  Elisp, Clang, Semantic, Eclim, Ropemacs, Ispell, CMake, BBDB, Yasnippet,
  dabbrev, etags, gtags, files, keywords and a few others.

  The CAPF back-end provides a bridge to the standard
  completion-at-point-functions facility, and thus works with any major mode
  that defines a proper completion function.


pkgId: 576c57a417a5e5f4d98033461ad4876f24ec3e7bd1ae3c7e321475355a7f71b1
name: emacs-ctable
arch: src
version: 0.1.2
epoch: 0
release: 16.fc45
summary: Table Component for Emacs Lisp
url: https://github.com/kiwanami/emacs-ctable/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-ctable-0.1.2-16.fc45.src.rpm
checksum_type: sha256
description:
  ctable.el is a table component for Emacs Lisp. Emacs lisp programs can display a
  nice table view from an abstract data model. The many emacs programs have the
  code for displaying table views, such as dired, list-process, buffer-list and so
  on. So, ctable.el would provide functions and a table framework for the table
  views.


pkgId: 4f526b7eb432c05bc63eea43e1e6e8978890d66af27a912a9b73d7c53afd8db2
name: emacs-deferred
arch: src
version: 0.5.1
epoch: 0
release: 15.fc45
summary: Simple asynchronous functions for Emacs Lisp
url: https://github.com/kiwanami/emacs-deferred/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-deferred-0.5.1-15.fc45.src.rpm
checksum_type: sha256
description:
  deferred.el provides facilities to manage asynchronous tasks.

  concurrent.el is a higher level library for asynchronous tasks, based on
  deferred.el.
  It is inspired by libraries of other environments and concurrent programming
  models. It has following facilities: pseud-thread, generator, semaphore,
  dataflow variables and event management.


pkgId: efb2731830070d2ec14d267873ecc1ca1e5e67a65093b46be029b9edd1f10622
name: emacs-dockerfile-mode
arch: src
version: 1.9
epoch: 0
release: 6.fc45
summary: An emacs mode for handling Dockerfiles
url: https://github.com/spotify/dockerfile-mode
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-13.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-dockerfile-mode-1.9-6.fc45.src.rpm
checksum_type: sha256
description:
  This package provides a major mode `dockerfile-mode' for use with the standard
  `Dockerfile' file format.  Additional convenience functions allow images to be
  built easily.


pkgId: a8a447fb759a58e079bcc338b07cc6f7f6dc8260375934edd76f44b3ffececfe
name: emacs-epc
arch: src
version: 0.1.1
epoch: 0
release: 16.fc45
summary: A RPC stack for Emacs Lisp
url: https://github.com/kiwanami/emacs-epc/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-epc-0.1.1-16.fc45.src.rpm
checksum_type: sha256
description:
  This program is an asynchronous RPC stack for Emacs. Using this RPC stack, the
  Emacs can communicate with the peer process smoothly. Because the protocol
  employs S-expression encoding and consists of asynchronous communications, the
  RPC response is fairly good.


pkgId: 78c170cdda6675219b354ebe498f7f3b9bc473438d27c730d8ea7784cd3bce2b
name: emacs-filesystem
arch: src
version: 30.2
epoch: 1
release: 3.fc45
summary: Emacs filesystem layout
url: https://www.gnu.org/software/emacs/
rpm_license: CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-filesystem-30.2-3.fc45.src.rpm
checksum_type: sha256
description:
  This package provides some directories which are required by other
  packages that add functionality to Emacs.


pkgId: 57feff3021ada5f12fb31a04587dd6ad2d4f153eb9feb0d22eae6206358782fe
name: emacs-flycheck
arch: src
version: 36.0
epoch: 0
release: 2.fc45
summary: On the fly syntax checking for GNU Emacs
url: https://www.flycheck.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-flycheck-36.0-2.fc45.src.rpm
checksum_type: sha256
description:
  Flycheck is a modern on-the-fly syntax checking extension for GNU Emacs,
  intended as replacement for the older Flymake extension which is part of GNU
  Emacs.


pkgId: fcb945d2c885af46ddd1252a0bd175bca75ec6fca95dea8ffff7f57c901d1bc2
name: emacs-flycheck-pycheckers
arch: src
version: 0.16
epoch: 0
release: 8.fc45
summary: Multiple syntax checker for Python in Emacs, using Flycheck
url: https://github.com/msherry/flycheck-pycheckers/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-flycheck-pycheckers-0.16-8.fc45.src.rpm
checksum_type: sha256
description:
  This package provides a way to run multiple syntax checkers on Python code, in
  parallel. The list of supported checkers includes:
  * pylint
  * flake8
  * pep8
  * pyflakes
  * mypy
  * bandit
  This is an alternative way of running multiple Python syntax checkers in
  Flycheck that doesn't depend on Flycheck's chaining mechanism.

  Flycheck is opinionated about what checkers should be run, and chaining is
  difficult to get right. This package assumes that the user knows what they want,
  and can configure their checkers accordingly — if they want to run both flake8
  and pylint, that's fine.

  This also allows us to run multiple syntax checkers in parallel, rather than
  sequentially.


pkgId: 3a8fcf8a05f3e775bac57387f454730a8d073ab94e5b8869d4f865cd3089f9b3
name: emacs-iedit
arch: src
version: 0.9.9.9.9
epoch: 0
release: 11.fc45
summary: Edit multiple regions simultaneously in Emacs
url: https://www.emacswiki.org/emacs/Iedit
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-iedit-0.9.9.9.9-11.fc45.src.rpm
checksum_type: sha256
description:
  This package includes Emacs minor modes (iedit-mode and iedit-rectangle-mode)
  based on an API library (iedit-lib) and allows you to alter one occurrence of
  some text in a buffer (possibly narrowed) or region, and simultaneously have
  other occurrences changed in the same way, with visual feedback as you type.

  iedit-mode is a great alternative to built-in replace commands:

  - A more intuitive way to alter all the occurrences at once
  - Visual feedback
  - Fewer keystrokes in most cases
  - Optionally preserve case


pkgId: 6fca0cb79a6436789228aeca7d2c5bb61dee5f471265192446c084b646d124f5
name: emacs-irsim-mode
arch: src
version: 0.1
epoch: 0
release: 36.fc45
summary: Irsim mode for emacs
url: http://code.google.com/p/irsim-mode/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-irsim-mode-0.1-36.fc45.src.rpm
checksum_type: sha256
description:
  IRSIM is a switch-level simulator for digital logic circuits.
  This is an Emacs mode for editing IRSIM netlists. It provides
  syntax highlighting and an extremely pleasant method of indentation.


pkgId: 4cfd190034f54fd4fb9764bf1e512a631bf746e3dcf501a74f0735592645a823
name: emacs-jedi
arch: src
version: 0.3.0~20250602git94a031d
epoch: 0
release: 2.fc45
summary: Python auto-completion for Emacs
url: https://tkf.github.io/emacs-jedi/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-jedi-0.3.0~20250602git94a031d-2.fc45.src.rpm
checksum_type: sha256
description:
  Jedi.el is a Python auto-completion package for Emacs. It aims at helping your
  Python coding in a non-destructive way. It also helps you to find information
  about Python objects, such as docstring, function arguments and code location.


pkgId: 0b1108591f322667e143ec9c1608b919ddd23b256af3f7f60fa03fcdcdef9f5c
name: emacs-jinx
arch: src
version: 2.9
epoch: 0
release: 1.fc45
summary: Fast just-in-time spell-checker for Emacs
url: https://github.com/minad/jinx
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-jinx-2.9-1.fc45.src.rpm
checksum_type: sha256
description:
  Jinx is a fast just-in-time spell-checker for Emacs. Jinx highlights
  misspelled words in the text of the visible portion of the buffer. For
  efficiency, Jinx highlights misspellings lazily, recognizes window
  boundaries and text folding, if any.


pkgId: 2921a95ce70c75ce00a8e6a898e5f7a3012036bc37ac1acbb66568e3ecabf0a1
name: emacs-json-mode
arch: src
version: 1.9.2
epoch: 0
release: 7.fc45
summary: Major mode for editing JSON files with Emacs
url: https://github.com/joshwnj/json-mode
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-json-mode-1.9.2-7.fc45.src.rpm
checksum_type: sha256
description:
  Major mode for editing JSON files.

  Extends the builtin js-mode to add better syntax highlighting for JSON.


pkgId: d0bef06ed19324fd0209cdedaba256fb21fd361c9573c9b9700c78e95d21b0e7
name: emacs-json-snatcher
arch: src
version: 1.0.0
epoch: 0
release: 20.fc45
summary: Get the path to a JSON element in Emacs
url: https://github.com/Sterlingg/json-snatcher
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-json-snatcher-1.0.0-20.fc45.src.rpm
checksum_type: sha256
description:
  Say you're looking through a large JSON file, and see a value that you want to
  extract programmatically. This Emacs extension will allow you to snatch the path
  to this value.


pkgId: c8274320f5a02ae40c84456db1d2552bfe4e478cc5eec5f684e52a1da71f3a31
name: emacs-logstash-conf
arch: src
version: 0.4
epoch: 0
release: 13.fc45
summary: Emacs mode for editing Logstash configuration files
url: https://github.com/Wilfred/logstash-conf.el/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-logstash-conf-0.4-13.fc45.src.rpm
checksum_type: sha256
description:
  A basic Emacs mode for editing Logstash configuration files.

  Features:
    * Syntax highlighting
    * Indentation


pkgId: c26142687ad1e2c3111c16fa834c64fbebace5e146dd740afa033633e5a61da8
name: emacs-magit
arch: src
version: 4.2.0
epoch: 0
release: 5.fc45
summary: Emacs interface to the most common Git operations
url: https://magit.vc
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-magit-4.2.0-5.fc45.src.rpm
checksum_type: sha256
description:
  Magit is an add-on package for GNU Emacs. It is an interface to
  the Git source-code management system that aims to make the most
  common operations convenient.


pkgId: d8dbee7d5b7ae73f819f7d023104a7d2f7481c58a75e0187479296fd817c8ce5
name: emacs-popup
arch: src
version: 0.5.9
epoch: 0
release: 11.fc45
summary: Visual Popup Interface Library for Emacs
url: https://github.com/auto-complete/popup-el/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-popup-0.5.9-11.fc45.src.rpm
checksum_type: sha256
description:
  Emacs.popup.el is a visual popup user interface library for Emacs. This provides
  a basic API and common UI widgets such as popup tooltips and popup menus.


pkgId: 3c66d912af319b714f9b9fd5168c9acb266ebd5ee54ede8e0d91880411918828
name: emacs-python-environment
arch: src
version: 0.0.2
epoch: 0
release: 15.fc45
summary: Python virtualenv API for Emacs Lisp
url: https://github.com/tkf/emacs-python-environment/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-python-environment-0.0.2-15.fc45.src.rpm
checksum_type: sha256
description:
  Emacs integrates well with external tools written in languages other than Emacs
  Lisp and thus use of these tools should be encouraged. However, many people try
  to avoid using non-Emacs Lisp software tools since it makes installation of
  their Emacs plugin hard. python-environment.el solves this problem (only for the
  case the tool is written in Python) by providing virtualenv API in Emacs Lisp so
  that you can automate installation of tools written in Python.


pkgId: 2bb8fd6575c9f0fdbb8b84541325d626ef43b3e2e4e44116b7f141006d8efd7b
name: emacs-rinari
arch: src
version: 2.1
epoch: 0
release: 36.20100815git.fc45
summary: Ruby on rails minor mode for Emacs
url: http://rinari.rubyforge.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-rinari-2.1-36.20100815git.fc45.src.rpm
checksum_type: sha256
description:
  Rinari is a set of Emacs Lisp functions aimed towards
  making Emacs into a top-notch Ruby on rails development environment.


pkgId: 52474c199d58ca7a2706aed1494ab1f4b98610fc16fa8daaf1d533f4661873e3
name: emacs-terraform-mode
arch: src
version: 1.1.0
epoch: 0
release: 3.fc45
summary: Major mode of Terraform configuration file
url: https://github.com/syohex/emacs-terraform-mode
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-terraform-mode-1.1.0-3.fc45.src.rpm
checksum_type: sha256
description:
  Major mode of terraform configuration file. terraform-mode provides syntax
  highlighting, indentation function and formatting.

  Format the current buffer with terraform-format-buffer. To always format
  terraform buffers when saving, use:

      (add-hook 'terraform-mode-hook 'terraform-format-on-save-mode)


pkgId: 328f66d1ddf0d5474d8024a70394eed5ca38b1f4d59e44682289670b039f7875
name: emacs-vm
arch: src
version: 8.3.2^20260226gitedecae2
epoch: 0
release: 2.fc45
summary: Emacs VM mail reader
url: https://gitlab.com/emacs-vm/vm/
rpm_license: GPL-1.0-or-later AND GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacs-vm-8.3.2^20260226gitedecae2-2.fc45.src.rpm
checksum_type: sha256
description:
  VM (View Mail) is an Emacs subsystem that allows e-mail to be read
  and disposed of within Emacs.  Commands exist to do the normal things
  expected of a mail user agent, such as generating replies, saving
  messages to folders, deleting messages and so on.  There are other
  more advanced commands that do tasks like bursting and creating
  digests, message forwarding, and organizing message presentation
  according to various criteria.


pkgId: cf6a56444637d5e50f6cbac5b0de8980720b59530d821c1d015da51865e12f8e
name: emacspeak
arch: src
version: 60.0
epoch: 0
release: 8.fc45
summary: Emacs Speech interface
url: http://emacspeak.sourceforge.net/
rpm_license: GPL-2.0-or-later AND BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emacspeak-60.0-8.fc45.src.rpm
checksum_type: sha256
description:
  Emacspeak is a speech interface that allows visually impaired users to
  interact independently and efficiently with the computer. Emacspeak has
  dramatically changed how the author and hundreds of blind and visually
  impaired users around the world interact with the personal computer and
  the Internet. A rich suite of task-oriented speech-enabled tools provides
  efficient speech-enabled access to the evolving semantic WWW.
  When combined with Linux running on low-cost PC hardware,
  Emacspeak/Linux provides a reliable, stable speech-friendly solution that
  opens up the Internet to visually impaired users around the world.


pkgId: 0c3598350ec1009d2a90fd563883f1a49d3dcac7f70f152a76aabbe66063604c
name: email2trac
arch: src
version: 2.14.0^20240910git0747a5a
epoch: 0
release: 5.fc45
summary: Utilities for converting emails to trac tickets
url: https://gitlab.com/surfsara/email2trac
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/email2trac-2.14.0^20240910git0747a5a-5.fc45.src.rpm
checksum_type: sha256
description:
  This is a release of the SARA package email2trac that contains
  utilities that we use to convert emails to trac tickets. The initial
  setup was made by Daniel Lundin from Edgewall Software. SARA has
  extend the initial setup, with the following extensions:

   * HTML message conversion
   * Attachments
   * Tickets can be updated via email
   * Use command-line options
   * Configuration file to control the behavior.
   * Unicode support
   * SPAM detection
   * Workflow support
   * FullBlogPlugin support
   * DiscussionPlugin support


pkgId: a0338f026654497759bb819b2533fea42ce58c400139fdf91597ae257087e4e2
name: embree
arch: src
version: 4.4.1
epoch: 0
release: 3.fc45
summary: High-performance ray tracing kernels
url: https://embree.github.io
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/embree-4.4.1-3.fc45.src.rpm
checksum_type: sha256
description:
  Embree provides high-performance ray tracing kernels optimized for modern CPUs,
  targeting graphics application engineers seeking to accelerate their rendering
  workloads.


pkgId: b709a9af2b0a91625954f4f65c0bc4a808d5acb4b75d6d2a20f3a49f7f9c0d42
name: embree3
arch: src
version: 3.13.5
epoch: 0
release: 18.fc45
summary: Collection of high-performance ray tracing kernels
url: https://embree.github.io
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/embree3-3.13.5-18.fc45.src.rpm
checksum_type: sha256
description:
  A collection of high-performance ray tracing kernels intended to graphics
  application engineers that want to improve the performance of their application.


pkgId: 0e3a2bc82845905775795ea67da2437c10103d68ef3bb125649cf64610cad57a
name: emerald-themes
arch: src
version: 0.8.18
epoch: 1
release: 15.fc45
summary: Themes for Emerald, a window decorator for Compiz Fusion
url: https://gitlab.com/compiz/emerald-themes
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emerald-themes-0.8.18-15.fc45.src.rpm
checksum_type: sha256
description:
  Emerald is themeable window decorator and compositing
  manager for Compiz Fusion.

  This package contains themes for emerald.


pkgId: 3bd146007e5eef9ad2646c1ba25fce67a507ce55b0b3b4e12c99ead3f357b66a
name: emu8051
arch: src
version: 0~20220911git5dc68127
epoch: 0
release: 6.fc45
summary: 8051/8052 emulator with curses-based UI
url: https://solhsa.com/8051.html
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/emu8051-0~20220911git5dc68127-6.fc45.src.rpm
checksum_type: sha256
description:
  This is a simulator of the 8051/8052 microcontrollers. For sake of simplicity,
  I'm only referring to 8051, although the emulator can emulate either one. For
  more information about the 8-bit chip(s), please check out 8052mcu.com or
  look up the data sheets. Intel, being the originator of the architecture,
  naturally has information as well.

  The 8051 is a pretty easy chip to play with, in both hardware and software.
  Hence, it's a good chip to use as an example when teaching about computer
  hardware. Unfortunately, the simulators in use in my school were a bit outdated,
  so I decided to write a new one.

  The scope of the emulator is to help test and debug 8051 assembler programs.
  What is particularily left out is clock-cycle exact simulation of processor pins.
  (For instance, MUL is a 48-clock operation on the 8051. On which clock cycle does
  the CPU read the operands? Or write the result?). Such simulation might help in
  designing some hardware, but for most uses it is unneccessary and complicated.


pkgId: e5f70d79dd7ba877a13773a718a7499188f7499327468f428606ad10fbd1c257
name: enblend
arch: src
version: 4.2
epoch: 0
release: 37.fc45
summary: Image Blending with Multiresolution Splines
url: http://enblend.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enblend-4.2-37.fc45.src.rpm
checksum_type: sha256
description:
  Enblend is a tool for compositing images, given a set of images that overlap in
  some irregular way, Enblend overlays them in such a way that the seam between
  the images is invisible, or at least very difficult to see.  Enfuse combines
  multiple images of the same subject into a single image with good exposure and
  good focus.  Enblend and Enfuse do not line up the images for you, use a tool
  like Hugin to do that.


pkgId: 08445eaa89ed6cd7e7bed45925d480295b70dc84ea902fd99d1c74a23c7bca1d
name: enca
arch: src
version: 1.19
epoch: 0
release: 20.fc45
summary: Character set analyzer and detector
url: http://cihar.com/software/enca
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enca-1.19-20.fc45.src.rpm
checksum_type: sha256
description:
  Enca is an Extremely Naive Charset Analyser. It detects character set and
  encoding of text files and can also convert them to other encodings using
  either a built-in converter or external libraries and tools like libiconv,
  librecode, or cstocs.

  Currently, it has support for Belarussian, Bulgarian, Croatian, Czech,
  Estonian, Latvian, Lithuanian, Polish, Russian, Slovak, Slovene, Ukrainian,
  Chinese and some multibyte encodings (mostly variants of Unicode)
  independent on the language.

  This package also contains shared Enca library other programs can make use of.

  Install enca if you need to cope with text files of dubious origin
  and unknown encoding and convert them to some reasonable encoding.


pkgId: 43236dabe373963c0f16e2098d3b7d4a032ab50b5aabe7773102a5239324dc2f
name: endless-sky
arch: src
version: 0.11.2
epoch: 0
release: 2.fc45
summary: Space exploration, trading, and combat game
url: https://endless-sky.github.io
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/endless-sky-0.11.2-2.fc45.src.rpm
checksum_type: sha256
description:
  Explore other star systems. Earn money by trading, carrying passengers, or
  completing missions. Use your earnings to buy a better ship or to upgrade the
  weapons and engines on your current one. Blow up pirates. Take sides in a civil
  war. Or leave human space behind and hope to find some friendly aliens whose
  culture is more civilized than your own...


pkgId: d6295fc6e856bcaff01ca49c1b67793a9fadc384b2c408078253fc3535fbb660
name: endlessh
arch: src
version: 1.1
epoch: 0
release: 17.fc45
summary: SSH tarpit that slowly sends an endless banner
url: https://github.com/skeeto/endlessh
rpm_license: Unlicense
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/endlessh-1.1-17.fc45.src.rpm
checksum_type: sha256
description:
  Endlessh is an SSH tarpit that very slowly sends an endless, random SSH banner.
  It keeps SSH clients locked up for hours or even days at a time. The purpose is
  to put your real SSH server on another port and then let the script kiddies get
  stuck in this tarpit instead of bothering a real server.


pkgId: 1397af10ce2917c0e0638aef4da5a1aa3de027cad0774eef203677fdf04b2ac1
name: enet
arch: src
version: 1.3.18
epoch: 0
release: 6.fc45
summary: Thin, simple and robust network layer on top of UDP
url: http://sauerbraten.org/enet/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enet-1.3.18-6.fc45.src.rpm
checksum_type: sha256
description:
  ENet is a relatively thin, simple and robust network communication layer on
  top of UDP (User Datagram Protocol). The primary feature it provides is
  optional reliable, in-order delivery of packets.

  ENet is NOT intended to be a general purpose high level networking library
  that handles authentication, lobbying, server discovery, compression,
  encryption and other high level, often application level or dependent tasks.


pkgId: 8582b0bd64bb68e0ef1de52b33f9e0c34e8391389ce7670c23809a105256047b
name: engauge-digitizer
arch: src
version: 12.9.1
epoch: 1
release: 5.fc45
summary: Convert graphs or map files into numbers
url: https://engaugedigitizer.com/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/engauge-digitizer-12.9.1-5.fc45.src.rpm
checksum_type: sha256
description:
  The Engauge Digitizer tool accepts image files
  (like PNG, JPEG and TIFF) containing graphs,
  and recovers the data points from those graphs.
  The resulting data points are usually used as input
  to other software applications.
  Conceptually, Engauge Digitizer is the opposite of
  a graphing tool that converts data points to graphs.
  The process is shown below - an image file is imported,
  digitized within Engauge, and exported as a table of
  numeric data to a text file.
  Work can be saved into an Engauge DIG file.

  New features already added to Engauge:

  -  Grid lines are displayed for fine adjustments of the axis points
     that define the coordinate systems
  -  Automated line and point extraction rapidly digitizes data
  -  Image processing for separating important details from background information
  -  Undo/redo of all operations means recovering from mistakes and experimenting
     with options is painless
  -  Installers for Windows and OSX operating systems, and repository packages for
     Linux make installation easy
  -  Wizard provides an interactive tutorial to explain the basic steps
  -  Wizard creates a checklist guide to interactively leads user through steps from
     file import to file export
  -  Cubic spline interpolation between points gives more accurate curves with
     fewer points
  -  Axes Checker briefly highlights the axes when they are defined or modified,
     to reveal entry mistakes
  -  Graph coordinates can be specified as date and time values, or as degrees,
     minutes and seconds
  -  File import and data export by drag-and-drop and copy/paste
  -  Test suite for regression testing minimizes code breakage as
     new features are added
  -  Multiple coordinate systems in the same image can be digitized in
     advanced mode
  -  Axes with only one known coordinate (floating axes) can be digitized in
     advanced mode
  -  Geometry Window displays geometric information about the selected curve
  -  Curve Fitting Window fits a polynomial function to the selected curve


pkgId: 133d35d42cd06c6b43a1616792be5bb6a2efd2aab59645b57ad0cb0671539f24
name: engrampa
arch: src
version: 1.28.3
epoch: 0
release: 2.fc45
summary: MATE Desktop file archiver
url: http://mate-desktop.org
rpm_license: GPL-2.0-or-later AND LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/engrampa-1.28.3-2.fc45.src.rpm
checksum_type: sha256
description:
  Mate File Archiver is an application for creating and viewing archives files,
  such as zip, xv, bzip2, cab, rar and other compress formats.


pkgId: f179c74e21ef57e2a4ce07e8bf08da04e309fe9debfdf57312912adb50ad15e4
name: enigma
arch: src
version: 1.30^20250322gitab9967a
epoch: 0
release: 4.fc45
summary: Game where you control a marble with the mouse
url: http://www.nongnu.org/enigma/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enigma-1.30^20250322gitab9967a-4.fc45.src.rpm
checksum_type: sha256
description:
  Enigma is a tribute to and a re-implementation of one of the most
  original and intriguing computer games of the 1990's: Oxyd.  Your
  objective is easily explained: find and uncover all pairs of identical
  Oxyd stones in each landscape.  Sounds simple?  It would be, if it
  weren't for hidden traps, vast mazes, insurmountable obstacles and
  innumerable puzzles blocking your direct way to the Oxyd stones...


pkgId: 48c0f5f40c2d1c1f99def226197de98d734775330aa884f276629a5ecfc4b1c7
name: enjarify
arch: src
version: 1.0.3
epoch: 0
release: 46.fc45
summary: Translate Dalvik bytecode to equivalent Java bytecode
url: https://github.com/Storyyeller/enjarify
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enjarify-1.0.3-46.fc45.src.rpm
checksum_type: sha256
description:
  Android applications are Java programs that run on a customized
  virtual machine, which is part of the Android operating system, the
  Dalvik VM. Their bytecode differs from the bytecode of normal Java
  applications.

  Enjarify can translate the Dalvik bytecode back to equivalent Java
  bytecode, which simplifies the analysis of Android applications.


pkgId: 6b08069eba6c553a35211450d1df423a686e7e7aaea953c29ccae522a6e9506b
name: enki
arch: src
version: 22.08.0
epoch: 0
release: 16.fc45
summary: Text editor for programmers
url: http://enki-editor.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enki-22.08.0-16.fc45.src.rpm
checksum_type: sha256
description:
  Enki is a text editor for programmers. It is:

      - User friendly. Intuitive interface. Works out of the box. You don’t have
        to read a lot of docs.
      - Hacker friendly. Work as quickly as possible. Navigate efficiently without
        your mouse.
      - Advanced. You invent software. An editor helps you focus on inventing,
        instead of fighting with your tools.
      - Extensible. Operating systems are designed for running applications. Enki
        is designed for running plugins.
      - Cross platform. Use your habitual editor on any OS. Tested on Linux and
        Windows. Users report that Enki works Mac OS X.
      - High quality. No long list of fancy features. But, what is done, is done
        well.
      - Open source. Created, tested, and designed for the community, by the
        community, and with the community.


pkgId: 3213926e9c4dacefb658a3b0e71bf57b5e7eb6dcf9087676a4c2bb0c729b0e71
name: enkiTS
arch: src
version: 1.11^git686d0ec
epoch: 0
release: 5.fc45
summary: A C and C++ task scheduler for creating parallel programs
url: https://github.com/dougbinks/enkiTS
rpm_license: Zlib
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enkiTS-1.11^git686d0ec-5.fc45.src.rpm
checksum_type: sha256
description:
  The primary goal of enkiTS is to help developers create programs which handle
  both data and task level parallelism to utilize the full performance of
  multicore CPUs, whilst being lightweight (only a small amount of code) and easy
  to use.


pkgId: 8304f054a817abe37ae3121e41b53e9e9f5053347c9766467b704b3c7725facb
name: enlightenment
arch: src
version: 0.27.1
epoch: 0
release: 4.fc45
summary: Enlightenment window manager
url: http://enlightenment.org
rpm_license: LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enlightenment-0.27.1-4.fc45.src.rpm
checksum_type: sha256
description:
  Enlightenment window manager is a lean, fast, modular and very extensible window
  manager for X11 and Linux. It is classed as a "desktop shell" providing the
  things you need to operate your desktop (or laptop), but is not a whole '
  application suite. This covered launching applications, managing their windows
  and doing other system tasks like suspending, reboots, managing files etc.


pkgId: 0207b070112c38168797310454918de49e1a7e249fe7c92336cf9db08a40df93
name: enscript
arch: src
version: 1.6.6
epoch: 0
release: 39.fc45
summary: A plain ASCII to PostScript converter
url: http://www.gnu.org/software/enscript
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enscript-1.6.6-39.fc45.src.rpm
checksum_type: sha256
description:
  GNU enscript is a free replacement for Adobe's Enscript
  program. Enscript converts ASCII files to PostScript(TM) and spools
  generated PostScript output to the specified printer or saves it to a
  file. Enscript can be extended to handle different output media and
  includes many options for customizing printouts

rpm_license:
  LGPL-2.0-or-later AND GPL-3.0-or-later AND GPL-2.0-or-later AND GPL-3.0-or-later WITH Bison-exception-2.2 AND LGPL-2.1-or-later


pkgId: 2acccf5069113efe7bcedef0fa1dd86a1612e913e646a02fe4aefc832de72eb4
name: ensmallen
arch: src
version: 3.11.0
epoch: 0
release: 2.fc45
summary: Header-only C++ library for efficient mathematical optimization
url: https://www.ensmallen.org
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ensmallen-3.11.0-2.fc45.src.rpm
checksum_type: sha256
description:
  ensmallen is a header-only C++ library for efficient mathematical optimization.
  It provides a simple set of abstractions for writing an objective function to
  optimize. It also provides a large set of standard and cutting-edge optimizers
  that can be used for virtually any mathematical optimization task.  These
  include full-batch gradient descent techniques, small-batch techniques,
  gradient-free optimizers, and constrained optimization.


pkgId: 64eff334c49c5337f762e0b46d4d728e546321a73fcc0388909c5229e7ce1852
name: entangle
arch: src
version: 3.0
epoch: 0
release: 18.fc45
summary: Tethered shooting & control of digital cameras
url: https://entangle-photo.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/entangle-3.0-18.fc45.src.rpm
checksum_type: sha256
description:
  Entangle is an application which uses GTK and libgphoto2 to provide a
  graphical interface for tethered photography with digital cameras.

  It includes control over camera shooting and configuration settings
  and 'hands off' shooting directly from the controlling computer.


pkgId: 7b04cd37edc3b9b188595bb3c44085113fefdd2f0b55283751505209f86bf66e
name: entr
arch: src
version: 5.8
epoch: 0
release: 2.fc45
summary: Run arbitrary commands when files change
url: http://eradman.com/entrproject/
rpm_license: ISC AND BSD-2-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/entr-5.8-2.fc45.src.rpm
checksum_type: sha256
description:
  A utility for running arbitrary commands when files change. Uses inotify to
  avoid polling. It was written to make rapid feedback and automated testing
  natural and completely ordinary.


pkgId: d08213b078b145bedc0d93ca82536a8f25dda701a3bd80074303b4cb05e843a1
name: entypo-fonts
arch: src
version: 20121031
epoch: 0
release: 27.fc45
summary: Pictogram Suite font
url: http://www.entypo.com/
rpm_license: LicenseRef-Callaway-CC-BY-SA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/entypo-fonts-20121031-27.fc45.src.rpm
checksum_type: sha256
description:
  Entypo is a set of 250+ carefully crafted pictograms. The source contains
  an icon font — OpenType, TrueType and @font-face — EPS, PDF and PSD files.
  Only the Desktop  ttf font is packaged, the other fonts contains
  trademarked symbols.


pkgId: 8be3960335076b85fb0b46755f7fd8a5e85b2dfcfe8dc49812f979e514c06702
name: enum
arch: src
version: 1.1
epoch: 0
release: 33.fc45
summary: Seq- and jot-like enumerator
url: https://fedorahosted.org/enum
rpm_license: LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/enum-1.1-33.fc45.src.rpm
checksum_type: sha256
description:
  Utility enum enumerates values (numbers) between two values, possibly
  further adjusted by a step and/or a count, all given on the command line.
  Before printing, values are passed through a formatter. Very fine control
  over input interpretation and output is possible.


pkgId: 7e3dbced74c28c49fedb047657a808dc747fe8847bfaf7ede8ae8b8a4b7b2ce8
name: environment-modules
arch: src
version: 5.6.1
epoch: 0
release: 4.fc45
summary: Provides dynamic modification of a user's environment
url: https://envmodules.io
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/environment-modules-5.6.1-4.fc45.src.rpm
checksum_type: sha256
description:
  The Environment Modules package provides for the dynamic modification of
  a user's environment via modulefiles.

  Each modulefile contains the information needed to configure the shell
  for an application. Once the Modules package is initialized, the
  environment can be modified on a per-module basis using the module
  command which interprets modulefiles. Typically modulefiles instruct
  the module command to alter or set shell environment variables such as
  PATH, MANPATH, etc. modulefiles may be shared by many users on a system
  and users may have their own collection to supplement or replace the
  shared modulefiles.

  Modules can be loaded and unloaded dynamically and atomically, in an
  clean fashion. All popular shells are supported, including bash, ksh,
  zsh, sh, csh, tcsh, as well as some scripting languages such as perl.

  Modules are useful in managing different versions of applications.
  Modules can also be bundled into meta-modules that will load an entire
  suite of different applications.

  NOTE: You will need to get a new shell after installing this package to
  have access to the module alias.


pkgId: 84df771dc1cc55af0b0fc091e80b5f8e3aed3425b6ddeb1ee1d624895390ebaf
name: envision
arch: src
version: 3.2.0
epoch: 0
release: 11.fc45
summary: UI for building, configuring, and running Monado/WiVRn
url: https://gitlab.com/gabmus/envision
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/envision-3.2.0-11.fc45.src.rpm
checksum_type: sha256
description:
  UI for building, configuring, and running Monado, the open source
  OpenXR runtime.

  This is still highly experimental software, while it's unlikely that
  anything bad will happen, it's still unstable and there is no guarantee
  that it will work on your system, with your particular hardware. If you
  encounter any problems while using the app, make sure to open an issue.

  Also consider that due to the unstable nature of the app, it's possible
  to encounter unexpected behavior that while in VR might cause motion
  sickness or physical injury. Be very careful while in VR using this app!

rpm_license:
  AGPL-3.0-or-later AND Apache-2.0 AND BSD-3-Clause AND GPL-2.0-only WITH GCC-exception-2.0 AND ISC AND LGPL-2.1-or-later AND MIT AND Unicode-3.0 AND Unicode-DFS-2016 AND Zlib AND (Apache-2.0 OR MIT) AND (Apache-2.0 OR BSL-1.0) AND (Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT) AND (BSD-2-Clause OR Apache-2.0 OR MIT) AND (Unlicense OR MIT)


pkgId: 402000fe34a102258e5b43be5f85b81176da18142d3f2bc1dc0cf2d7b1b04837
name: envytools
arch: src
version: 0.0
epoch: 0
release: 0.35.git20200810.fc45
summary: Tools for people envious of nvidia's blob driver
url: https://github.com/envytools/envytools
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/envytools-0.0-0.35.git20200810.fc45.src.rpm
checksum_type: sha256
description:
  Envytools contains a number of tools used for debugging / development of
  the nouveau driver:

  envydis: Disassembler and assembler for various ISAs found on nvidia GPUs
  nvbios:  Tools to decode the card description structures found in nvidia VBIOS
  nva:     Tools to directly access the GPU registers
  vstream: Tools to decode and encode raw video bitstreams


pkgId: 4a1efa12346808fa5f60d18e18c61ac5678791c58a0ad644c691085677561e1b
name: eog
arch: src
version: 50.2
epoch: 0
release: 3.fc45
summary: Eye of GNOME image viewer
url: https://wiki.gnome.org/Apps/EyeOfGnome
rpm_license: GPL-2.0-or-later AND CC-BY-SA-3.0 AND CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eog-50.2-3.fc45.src.rpm
checksum_type: sha256
description:
  The Eye of GNOME image viewer (eog) is the official image viewer for the
  GNOME desktop. It can view single image files in a variety of formats, as
  well as large image collections.

  eog is extensible through a plugin system.


pkgId: a3e017256214ee9a096674a47df6d1484f40230c4958e7bb783813f9463e05ee
name: eog-plugins
arch: src
version: 44.1
epoch: 0
release: 15.fc45
summary: A collection of plugins for the eog image viewer
url: https://wiki.gnome.org/Apps/EyeOfGnome/Plugins
rpm_license: GPL-2.0-or-later AND CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eog-plugins-44.1-15.fc45.src.rpm
checksum_type: sha256
description:
  It's a collection of plugins for use with the Eye of GNOME Image Viewer.
  The included plugins provide a map view for where the picture was taken,
  display of Exif information, Zoom to fit, etc.


pkgId: d1cac24ce859e3ccf836ffa5e9622ba13bd4db47d0d9b25449a3e460acdb5d48
name: eom
arch: src
version: 1.28.1
epoch: 0
release: 3.fc45
summary: Eye of MATE image viewer
url: http://mate-desktop.org
rpm_license: GPL-2.0-or-later AND LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eom-1.28.1-3.fc45.src.rpm
checksum_type: sha256
description:
  The Eye of MATE (eom) is the official image viewer for the
  MATE desktop. It can view single image files in a variety of formats, as
  well as large image collections.
  Eye of Mate is extensible through a plugin system.


pkgId: f5e857adac57973f87fbba77b086403cf781028f0c6b8232023c37b6371bb0f6
name: eot-utils
arch: src
version: 1.1
epoch: 0
release: 50.fc45
summary: Create or examine EOT font format files
url: https://www.w3.org/Tools/eot-utils/
rpm_license: W3C AND FSFUL AND FSFULLR AND GPL-2.0-or-later AND X11
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eot-utils-1.1-50.fc45.src.rpm
checksum_type: sha256
description:
  The eot-utils are the two programs mkeot and eotinfo. The former creates an EOT
  (Embedded OpenType) file from an OpenType or TrueType font and the URLs of one
  or more Web pages, respecting the TrueType embedding bits. The eotinfo program
  displays EOT metadata in a human-readable way.


pkgId: fe98629cb46328ec38e1fb64c4d11ef9a21029ac565ac7ef7bdbb67aba99c177
name: epic
arch: src
version: 3.0
epoch: 4
release: 8.fc45
summary: An ircII chat client
url: http://www.epicsol.org/
rpm_license: BSD-3-Clause AND ISC AND LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/epic-3.0-8.fc45.src.rpm
checksum_type: sha256
description:
  EPIC (Enhanced Programmable ircII Client) is an advanced ircII chat
  client.  Chat clients connect to servers around the world, enabling
  you to chat with other people.


pkgId: c37f4624d69b958a6183eccc8f7b8ec7e59fa8edf9b453c3e7dccd9c69052c34
name: epiphany
arch: src
version: 51~beta
epoch: 1
release: 1.fc45
summary: Web browser for GNOME
url: https://wiki.gnome.org/Apps/Web
rpm_license: GPL-3.0-or-later AND CC-BY-SA-3.0 AND CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/epiphany-51~beta-1.fc45.src.rpm
checksum_type: sha256
description:
  Epiphany is the web browser for the GNOME desktop. Its goal is to be
  simple and easy to use. Epiphany ties together many GNOME components
  in order to let you focus on the web content, instead of the browser
  application.


pkgId: fb7f4013d9b78d771880ef2ef3828aab86b9539f187033b73db6b53742450bb8
name: epix
arch: src
version: 1.2.22
epoch: 0
release: 11.fc45
summary: Utilities for mathematically accurate figures
url: https://mathcs.holycross.edu/~ahwang/current/ePiX.html
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/epix-1.2.22-11.fc45.src.rpm
checksum_type: sha256
description:
  ePiX (pronounced like "epic" with a soft "k", playing on "TeX"), a
  collection of command line utilities for *nix, creates mathematically
  accurate figures, plots, and movies using easy-to-learn syntax. The
  output is expressly designed for use with LaTeX.


pkgId: 8cdb5c95a75a89413d280a689b929686b8df5ab105575902b5ba38c94af37389
name: epstool
arch: src
version: 3.08
epoch: 0
release: 34.fc45
summary: A utility to create or extract preview images in EPS files
url: http://pages.cs.wisc.edu/~ghost/gsview/epstool.htm
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/epstool-3.08-34.fc45.src.rpm
checksum_type: sha256
description:
  Epstool is a utility to create or extract preview images in EPS files,
  fix bounding boxes and convert to bitmaps.

  Features:
  * Add EPSI, DOS EPS or Mac PICT previews.
  * Extract PostScript from DOS EPS files.
  * Uses Ghostscript to create preview bitmaps.
  * Create a TIFF, WMF, PICT or Interchange preview from part of a
    bitmap created by Ghostscript.
  * works under Win32, Win64, OS/2 and Unix.
  * works on little-endian machines (Intel) or big endian (Sun Sparc,
    Motorola) machines.


pkgId: 48ba22efcc8c5366983581382b5dba338ea1d1305b65ff59e68ecc0b24b0ed7d
name: equalx
arch: src
version: 0.7.1
epoch: 0
release: 31.fc45
summary: A graphical editor for writing LaTeX equations
url: http://equalx.sourceforge.net
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/equalx-0.7.1-31.fc45.src.rpm
checksum_type: sha256
description:
  EqualX is an application that helps you to write equations in LaTeX
  and to preview them in real-time.


pkgId: e82b58987e9a97500c3dd71e981d2f8a2b298f7d6fa7f78de9be9299b5656de6
name: eralchemy
arch: src
version: 1.5.0
epoch: 0
release: 5.fc45
summary: Entity Relation Diagrams generation tool
url: https://github.com/eralchemy/eralchemy
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-34.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eralchemy-1.5.0-5.fc45.src.rpm
checksum_type: sha256
description:
  ERAlchemy generates Entity Relation (ER) diagram (like the one below) from
  databases or from SQLAlchemy models.


pkgId: 9fc8eda004af14563f19f3cec9b095c21cc67a7010ee5a82df522a3f1bf6e7ba
name: erfa
arch: src
version: 2.0.1
epoch: 0
release: 9.fc45
summary: Essential Routines for Fundamental Astronomy
url: https://github.com/liberfa/erfa
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erfa-2.0.1-9.fc45.src.rpm
checksum_type: sha256
description:
  ERFA is a C library containing key algorithms for astronomy, and is
  based on the SOFA library published by the International Astronomical
  Union (IAU).


pkgId: 8397e5a21cff7e40940fb038db9abbcb8c6532d16382752c80e4ee3a058e8a3f
name: ergo
arch: src
version: 3.8.2
epoch: 0
release: 7.fc43
summary: A program for large-scale self-consistent field calculations
url: http://www.ergoscf.org
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-32.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ergo-3.8.2-7.fc43.src.rpm
checksum_type: sha256
description:
  Ergo is a quantum chemistry program for large-scale self-consistent
  field calculations.

  Key features of the Ergo program:
  * Performs electronic structure calculations using Hartree-Fock and
    Kohn-Sham density functional theory.
  * Uses Gaussian basis sets.
  * Both core and valence electrons are included in the calculations.
  * Both restricted and unrestricted models are implemented for energy
    calculations.
  * Implements a broad range of both pure and hybrid Kohn-Sham density
    functionals.
  * Employs modern linear scaling techniques like fast multipole
    methods, hierarchic sparse matrix algebra, density matrix
    purification, and efficient integral screening.
  * Linear scaling is achieved not only in terms of CPU usage but also
    memory utilization.
  * The time consuming parts of the code are currently parallelized
    using the shared-memory paradigm.

  Linear response calculations of polarizabilities and excitation energies are
  possible for the restricted reference density, although complete linear scaling
  is in the current implementation not achieved since full dense matrices are
  still used in parts of the linear response implementation.


pkgId: d087cb593e28b9f4048dec8edd9f9ba4d6f2fb1d3f60edde14c70168069d4aed
name: erlang
arch: src
version: 27.3.4.16
epoch: 0
release: 1.fc45
summary: General-purpose programming language and runtime environment
url: https://www.erlang.org
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-27.3.4.16-1.fc45.src.rpm
checksum_type: sha256
description:
  Erlang is a general-purpose programming language and runtime
  environment. Erlang has built-in support for concurrency, distribution
  and fault tolerance. Erlang is used in several large telecommunication
  systems from Ericsson.


pkgId: cd1d1c1fff0f2e0648319e08aa5be76509c1d96e97a0a297c50eba897283e051
name: erlang-bear
arch: src
version: 1.1.1
epoch: 0
release: 2.fc45
summary: A set of statistics functions for erlang
url: https://github.com/folsom-project/bear
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-bear-1.1.1-2.fc45.src.rpm
checksum_type: sha256
description:
  A set of statistics functions for Erlang. Currently bear is focused on use
  inside the Folsom Erlang metrics library but all of these functions are generic
  and useful in other situations.


pkgId: 8a1e9c45aad7222fe9deea98658df045ee7b6c708548bd0fee3cf9b690424be6
name: erlang-cache_tab
arch: src
version: 1.0.34
epoch: 0
release: 2.fc45
summary: Erlang cache table application
url: https://github.com/processone/cache_tab
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-cache_tab-1.0.34-2.fc45.src.rpm
checksum_type: sha256
description:
  This application is intended to proxy back-end operations for Key-Value insert,
  lookup and delete and maintain a cache of those Key-Values in-memory, to save
  back-end operations. Operations are intended to be atomic between back-end and
  cache tables. The lifetime of the cache object and the max size of the cache
  can be defined as table parameters to limit the size of the in-memory tables.


pkgId: 553bf41490a4da5c134330c5e7df84894f61f16e8dcfc78db9a0c81e1594bc26
name: erlang-certifi
arch: src
version: 2.17.0
epoch: 0
release: 2.fc45
summary: Dummy certifi (certificate bundle) package for erlang
url: https://github.com/certifi/erlang-certifi
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-certifi-2.17.0-2.fc45.src.rpm
checksum_type: sha256
description:
  Upstream certifi provides a custom CA bundle to erlang. Since custom CA bundles
  cannot be packaged in Fedora, this 'dummy' package patches certifi to point to
  the default Fedora CA bundle.


pkgId: b2b3cbf33f23b8b894c2a0e642d6e0e1c0bf51c04dd71c77bcd742a922151285
name: erlang-clique
arch: src
version: 0.3.12
epoch: 0
release: 16.fc45
summary: CLI Framework for Erlang
url: https://github.com/basho/clique
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-clique-0.3.12-16.fc45.src.rpm
checksum_type: sha256
description:
  Clique is an opinionated framework for building command line interfaces in
  Erlang. It provides users with an interface that gives them enough power to
  build complex CLIs, but enough constraint to make them appear consistent.


pkgId: cdd3ac8d07ce26349a9d274dc1c7428fdab8d78042b9fcff4511cfb5416f81c3
name: erlang-corba
arch: src
version: 5.2.2
epoch: 1
release: 3.fc45
summary: Erlang CORBA libraries
url: https://github.com/erlang/corba
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-corba-5.2.2-3.fc45.src.rpm
checksum_type: sha256
description:
  A set of Erlang applications, that implements a CORBA compliant Object Request
  Broker (ORB) and a number of Object Managemnt Group (OMG) standard services.


pkgId: 795a92eabd7726ab2564b0d61bd573c475a87bc3c8ad45fbaeb8e03174f9a22a
name: erlang-covertool
arch: src
version: 2.0.7
epoch: 0
release: 2.fc45
summary: Tool to convert Erlang cover data files into Cobertura XML reports
url: https://github.com/covertool/covertool
rpm_license: BSD-2-Clause-Views
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-covertool-2.0.7-2.fc45.src.rpm
checksum_type: sha256
description:
  A simple tool to convert exported Erlang cover data sets into Cobertura XML
  reports. The report could be then feed to the Jenkins Cobertura plug-in.


pkgId: 41a3937f7e04633fc2e8f3e92e27064b5323e3c697e0a31a8e1818d08a9ff766
name: erlang-cuttlefish
arch: src
version: 2.1.1
epoch: 0
release: 14.fc45
summary: A library for dealing with sysctl-like configuration syntax
url: https://github.com/basho/cuttlefish
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-cuttlefish-2.1.1-14.fc45.src.rpm
checksum_type: sha256
description:
  Cuttlefish is a library for Erlang applications that wish to walk the fine line
  between Erlang app.configs and a sysctl-like syntax. The name is a pun on the
  pronunciation of 'sysctl' and jokes are better explained.


pkgId: d99de3977de8f70733a0793d510f6f214b33d94fb6ab721020fe206b72130be1
name: erlang-eimp
arch: src
version: 1.0.27
epoch: 0
release: 2.fc45
summary: Erlang Image Manipulation Process
url: https://github.com/processone/eimp
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-eimp-1.0.27-2.fc45.src.rpm
checksum_type: sha256
description:
  eimp is an Erlang/Elixir application for manipulating graphic images
  using external C libraries. It supports WebP, JPEG, PNG and GIF.


pkgId: 9ddb80f7ec5dbc5f85797463799d98c3250f83bc8c7fc0c14aed2644496a008d
name: erlang-emmap
arch: src
version: 2.0.11
epoch: 0
release: 8.20230313gitf4a6f82.fc45
summary: Erlang mmap interface
url: https://github.com/saleyn/emmap
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-emmap-2.0.11-8.20230313gitf4a6f82.fc45.src.rpm
checksum_type: sha256
description:
  This Erlang library provides a wrapper that allows you to memory map files into
  the Erlang memory space.


pkgId: 5acddea2661c6618035dd7abbb5e402f0abc10e2d23423bdc2688920eecbe7d9
name: erlang-epgsql
arch: src
version: 4.8.0
epoch: 0
release: 3.fc45
summary: Erlang PostgreSQL client library
url: https://github.com/epgsql/epgsql
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-epgsql-4.8.0-3.fc45.src.rpm
checksum_type: sha256
description:
  Library that gives possibility to Erlang programs to connect PostgreSQL
  databases by plain TCP and execute simple SQL statements.


pkgId: 07aa79a810d8bcd6ba238f9ef3f096b8b284046ac4989753c2abaeb97099ceab
name: erlang-erlsom
arch: src
version: 1.5.2
epoch: 0
release: 3.fc45
summary: Support for XML Schema in Erlang
url: https://github.com/willemdj/erlsom
rpm_license: LGPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-erlsom-1.5.2-3.fc45.src.rpm
checksum_type: sha256
description:
  Erlsom is a set of functions to deal with XML Schema (XSDs) in Erlang.
  First you 'compile' the schema, and after that you can parse XML
  documents that conform to the schema. The result is a structure of
  Erlang records, based on the types that are defined by the Schema.
  Or, the other way around, a structure of records can be translated
  to an XML document.


pkgId: 72a30f3b3f93293b7972a2186d9ca82fafa87d1481cadf7cdfd5176d4bb402cc
name: erlang-erlydtl
arch: src
version: 0.15.0
epoch: 0
release: 3.fc45
summary: Erlang implementation of the Django Template Language
url: https://github.com/erlydtl/erlydtl
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-erlydtl-0.15.0-3.fc45.src.rpm
checksum_type: sha256
description:
  ErlyDTL is an Erlang implementation of the Django Template Language. The
  erlydtl module compiles Django Template source code into Erlang bytecode. The
  compiled template has a "render" function that takes a list of variables and
  returns a fully rendered document.


pkgId: 4af51433b7fe4914917882ae6eb1d3b8d87e7369765d8d9e9f9bdb79e0bfba6c
name: erlang-exometer_core
arch: src
version: 2.0.0
epoch: 0
release: 2.fc45
summary: Easy and efficient instrumentation of Erlang code
url: https://github.com/feuerlabs/exometer_core
rpm_license: MPL-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-exometer_core-2.0.0-2.fc45.src.rpm
checksum_type: sha256
description:
  The Exometer Core package allows for easy and efficient instrumentation of
  Erlang code, allowing crucial data on system performance to be exported to a
  wide variety of monitoring systems.

  Exometer Core comes with a set of predefined monitor components, and can be
  expanded with custom components to handle new types of Metrics, as well as
  integration with additional external systems such as databases, load balancers,
  etc.


pkgId: f2cd3684024d2dadcb58da0027b0f6b2b1ff1272e4b8b5ae5a53dbada9d9ed46
name: erlang-fast_xml
arch: src
version: 1.1.60
epoch: 0
release: 2.fc45
summary: Fast Expat based Erlang XML parsing and manipulation library
url: https://github.com/processone/fast_xml
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-fast_xml-1.1.60-2.fc45.src.rpm
checksum_type: sha256
description:
  Fast Expat based Erlang XML parsing and manipulation library, with a strong
  focus on XML stream parsing from network. It supports full XML structure
  parsing, suitable for small but complete XML chunks, and XML stream parsing
  suitable for large XML document, or infinite network XML stream like XMPP.
  This module can parse files much faster than built-in module xmerl. Depending
  on file complexity and size xml_stream:parse_element/1 can be 8-18 times faster
  than calling xmerl_scan:string/2.


pkgId: cc12bfa8321138f1fa57c384a829e0486e4ca53a8abf2d37526f07579529d15d
name: erlang-folsom
arch: src
version: 1.1.1
epoch: 0
release: 3.fc45
summary: Erlang-based metrics system
url: https://github.com/folsom-project/folsom
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-folsom-1.1.1-3.fc45.src.rpm
checksum_type: sha256
description:
  Folsom is an Erlang based metrics system inspired by Coda Hale's metrics.
  The metrics API's purpose is to collect realtime metrics from your Erlang
  applications and publish them via Erlang APIs and output plugins. Folsom is not
  a persistent store. There are 6 types of metrics: counters, gauges, histograms
  and timers, histories, meter_readers and meters. Metrics can be created, read
  and updated via the folsom_metrics module.


pkgId: dfee37961591d373911887b990337688fb037bad2fb545c221a1862d7e960a22
name: erlang-gen_leader
arch: src
version: 1.0
epoch: 0
release: 40.fc45
summary: A leader election behavior modeled after gen_server
url: https://github.com/garret-smith/gen_leader_revival
rpm_license: ErlPL-1.1
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-gen_leader-1.0-40.fc45.src.rpm
checksum_type: sha256
description:
  This application implements a leader election behavior modeled after gen_server.
  This behavior intends to make it reasonably straightforward to implement a fully
  distributed server with master-slave semantics.


pkgId: 9fa8300c1353659c2927260d46939256d9517b154f48b835b3dce8e804e47e45
name: erlang-hamcrest
arch: src
version: 0.1.0
epoch: 0
release: 35.20181106git0766ea0.fc45
summary: A framework for writing matcher objects using declarative rules
url: https://github.com/hyperthunk/hamcrest-erlang
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-hamcrest-0.1.0-35.20181106git0766ea0.fc45.src.rpm
checksum_type: sha256
description:
  Hamcrest is a framework for writing matcher objects allowing 'match' rules to
  be defined declaratively. There are a number of situations where matchers are
  invaluable, such as UI validation, or data filtering, but it is in the area of
  writing flexible tests that matchers are most commonly used.


pkgId: ed01268a803ecd6105cf20a00e2e18e664f019aabd93866d367a81ae5b42417e
name: erlang-hut
arch: src
version: 1.4.0
epoch: 0
release: 7.fc45
summary: A helper library for making Erlang libraries logging framework agnostic
url: https://github.com/tolbrino/hut
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-hut-1.4.0-7.fc45.src.rpm
checksum_type: sha256
description:
  A minimal library for Erlang libraries and small applications to stay agnostic
  to the logging framework in use. Its purpose is to allow the developers of
  umbrella applications to use their logging framework of choice and ensure that
  dependency stick to that choice as well.


pkgId: d6f717f98c1ff0a640c3c8728c14221da3ccdafbe5ecfe5ea7860fdb5c8f6cb7
name: erlang-hyper
arch: src
version: 0
epoch: 0
release: 0.32.20161011git4b1abc4.fc45
summary: An implementation of the HyperLogLog algorithm in Erlang
url: https://github.com/GameAnalytics/hyper
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-hyper-0-0.32.20161011git4b1abc4.fc45.src.rpm
checksum_type: sha256
description:
  An implementation of the HyperLogLog algorithm in Erlang. Using HyperLogLog you
  can estimate the cardinality of very large data sets using constant memory. The
  relative error is 1.04 * sqrt(2^P). When creating a new HyperLogLog filter, you
  provide the precision P, allowing you to trade memory for accuracy. The union
  of two filters is lossless.


pkgId: e1f540f54dc482ae6c77249a7d6342157e49d95b86c8f636193852b2779442ce
name: erlang-kvc
arch: src
version: 1.7.0
epoch: 0
release: 30.fc45
summary: Key Value Coding for Erlang data structures
url: https://github.com/etrepum/kvc
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-kvc-1.7.0-30.fc45.src.rpm
checksum_type: sha256
description:
  kvc supports Key Value Coding-like queries on common Erlang data structures. A
  common use case for kvc is to quickly access one or more deep values in decoded
  JSON, or some other nested data structure. It can also help with some aggregate
  operations. It solves similar problems that you might want to use a tool like
  XPath or jQuery for, but it is far simpler and strictly less powerful. It's
  inspired by Apple's NSKeyValueCoding protocol from Objective-C.


pkgId: b6e8f68c218c5f3ee6bd19a0fdc3d0038b1d38228850f0d8584fce26889e0898
name: erlang-lager
arch: src
version: 3.9.2
epoch: 0
release: 19.fc45
summary: A logging framework for Erlang/OTP
url: http://github.com/erlang-lager/lager
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-lager-3.9.2-19.fc45.src.rpm
checksum_type: sha256
description:
  Lager (as in the beer) is a logging framework for Erlang. Its purpose is to
  provide a more traditional way to perform logging in an erlang application that
  plays nicely with traditional UNIX logging tools like logrotate and syslog.


pkgId: a7c5d1c17d287d3b81ee5d5d1052bf3699e91ec79be62b2c502c2008049e1512
name: erlang-lfe
arch: src
version: 2.2.2
epoch: 0
release: 1.fc45
summary: Lisp Flavoured Erlang
url: https://github.com/lfe/lfe
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-lfe-2.2.2-1.fc45.src.rpm
checksum_type: sha256
description:
  Lisp Flavoured Erlang, is a lisp syntax front-end to the Erlang
  compiler. Code produced with it is compatible with "normal" Erlang
  code. An LFE evaluator and shell is also included.


pkgId: 21c02d811212c70ec7f1262bf8d7ffcc31c7debbb5ebdaf77cb5feeb6199e350
name: erlang-meck
arch: src
version: 1.2.0
epoch: 0
release: 2.fc45
summary: A mocking library for Erlang
url: https://github.com/eproxus/meck
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-45.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-meck-1.2.0-2.fc45.src.rpm
checksum_type: sha256
description:
  With meck you can easily mock modules in Erlang. Since meck is intended to be
  used in testing, you can also perform some basic validations on the mocked
  modules, such as making sure no function is called in a way it should not.


pkgId: 0c459cedcade41fdafd6085a6ffa8811ffb6b418031d517c199d39bf461f9837
name: erlang-merge_index
arch: src
version: 2.1
epoch: 0
release: 32.fc45
summary: An Erlang library for storing ordered sets on disk
url: https://github.com/basho/merge_index
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-merge_index-2.1-32.fc45.src.rpm
checksum_type: sha256
description:
  MergeIndex is an Erlang library for storing ordered sets on disk. It is very
  similar to an SSTable (in Google's Bigtable) or an HFile (in Hadoop).


pkgId: b40822bc994685da1de9dcfa6c7af4987bd76061a784d33c540d95ec77b2270d
name: erlang-mozjs
arch: src
version: 2.0.1
epoch: 0
release: 5.fc45
summary: A NIF module for Erlang to Mozilla's Spidermonkey Javascript runtime
url: https://github.com/erlang-mozjs/erlang-mozjs
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-mozjs-2.0.1-5.fc45.src.rpm
checksum_type: sha256
description:
  A NIF library that embeds Mozilla's SpiderMonkey JavaScript engine in Erlang.
  Originally created to facilitate usage of Riak's MapReduce by non-Erlang
  programmers, it supports multiple concurrent JavaScript VMs, runtime evaluation
  of JavaScript code, and invocation of JavaScript functions.


pkgId: cae011e151993bdf1057dc48d217469d5e1c7d5dababe7ab8cfe878baf842154
name: erlang-mustache
arch: src
version: 0.1.1
epoch: 0
release: 32.fc45
summary: Mustache template engine for Erlang
url: https://github.com/mojombo/mustache.erl
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-mustache-0.1.1-32.fc45.src.rpm
checksum_type: sha256
description:
  An Erlang port of Mustache for Ruby. Mustache is a framework-agnostic template
  system that enforces separation of view logic from the template file. Indeed, it
  is not even possible to embed logic in the template. This allows templates to be
  reused across language boundaries and for other language independent uses.


pkgId: 708e7c75171563009899337e20b64681a137b7c76df6bc541dc9c92726bad2be
name: erlang-oauth
arch: src
version: 2.1.0
epoch: 0
release: 16.fc45
summary: An Erlang OAuth 1.0 implementation
url: http://github.com/erlangpack/erlang-oauth
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-oauth-2.1.0-16.fc45.src.rpm
checksum_type: sha256
description:
  An Erlang OAuth 1.0 implementation. Includes functions for generating
  signatures (client side), verifying signatures (server side), and some
  convenience functions for making OAuth HTTP requests (client side).


pkgId: c08a0ec0f38208855877114eb9cdc80719bcdf74fc0479c87d85d3711d281afa
name: erlang-p1_oauth2
arch: src
version: 0.6.14
epoch: 0
release: 7.fc45
summary: An Oauth2 implementation for Erlang
url: https://github.com/processone/p1_oauth2
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-p1_oauth2-0.6.14-7.fc45.src.rpm
checksum_type: sha256
description:
  This library is designed to simplify the implementation of the server side of
  OAuth2. It is a fork of erlang-oauth2 by processone, and is needed by ejabberd.


pkgId: e84cf7dd000835b3bb45b9dab8bbc28136f4605b86265f4508bde679c9167313
name: erlang-p1_utils
arch: src
version: 1.0.29
epoch: 0
release: 2.fc45
summary: Erlang utility modules from ProcessOne
url: https://github.com/processone/p1_utils
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-28.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-p1_utils-1.0.29-2.fc45.src.rpm
checksum_type: sha256
description:
  p1_utils is an application containing ProcessOne modules and tools that are
  leveraged in other development projects.


pkgId: 982c3f9849605e3faa2f171dd8d0afb1c077b0ab85b95a72bc12e1d79ce3815e
name: erlang-proper
arch: src
version: 1.5.0
epoch: 0
release: 4.fc45
summary: A QuickCheck-inspired property-based testing tool for Erlang
url: https://github.com/proper-testing/proper
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-proper-1.5.0-4.fc45.src.rpm
checksum_type: sha256
description:
  PropEr (PROPerty-based testing tool for ERlang) is a QuickCheck-inspired
  open-source property-based testing tool for Erlang.


pkgId: 1f6d2fc2146436bdbbc4d545e46e7a382ae789f34ddf80869c84ff27eb722bd8
name: erlang-rebar3
arch: src
version: 3.27.0
epoch: 0
release: 7.fc45
summary: Tool for working with Erlang projects
url: https://github.com/erlang/rebar3
rpm_license: Apache-2.0 and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-rebar3-3.27.0-7.fc45.src.rpm
checksum_type: sha256
description:
  Rebar3 is an Erlang tool that makes it easy to create, develop, and release
  Erlang libraries, applications, and systems in a repeatable manner.


pkgId: c4e65bbc06c6995e3c05c8740efa44996fce6fdb7ef9fbfc3577cc1a548cfde7
name: erlang-rebar3-pc
arch: src
version: 1.15.0
epoch: 0
release: 9.fc45
summary: A port compiler for Rebar3
url: https://github.com/blt/port_compiler
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-rebar3-pc-1.15.0-9.fc45.src.rpm
checksum_type: sha256
description:
  This plugin is intended to replicate the Rebar2 support for compiling native
  code. It is not a drop-in replacement in terms of command-line interface but
  the exact configuration interface in projects' rebar.configs have been
  preserved.


pkgId: e2e7cf1e7e9a47b276360f18e2e98845688767fa0bd5aa54fd9b83cf2ffeb7c3
name: erlang-recon
arch: src
version: 2.5.6
epoch: 0
release: 2.fc45
summary: A collection of functions and scripts to debug Erlang in production
url: https://github.com/ferd/recon
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-recon-2.5.6-2.fc45.src.rpm
checksum_type: sha256
description:
  Recon wants to be a set of tools usable in production to diagnose Erlang
  problems or inspect production environment safely.


pkgId: fbad1e5e7e98d0e92e420c70001906f5b772851c6936c087139eb3fbfbe44ad6
name: erlang-redbug
arch: src
version: 2.0.10
epoch: 0
release: 2.fc45
summary: Erlang tracing debugger
url: https://github.com/massemanet/redbug
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-redbug-2.0.10-2.fc45.src.rpm
checksum_type: sha256
description:
  redbug is a tool to interact with the Erlang trace facility. It is intended to
  be run from the erlang shell, but it can also be run from an OS shell as an
  escript (see below). It will instruct the Erlang VM to generate so-called
  'trace messages' when certain events (such as a particular function being
  called) occur. It uses a safe subset of the tracing functionality, and exits if
  it feels overloaded, e.g. if it gets flooded by trace messages. It runs in the
  background, collecting trace messages, until it reaches one of its termination
  criteria (number of messages/file size or elapsed time).

  The trace messages are either printed (i.e. human readable) to a file or to the
  screen; or written to a trc file. Using a trc file puts less stress on the
  system, but there is no way to count the messages (so the 'msgs' opt is
  ignored), and the files can only be read by special tools (such as 'bread').
  Printing and trc files cannot be combined. By default (i.e. if the 'file' opt
  is not given), messages are printed.


pkgId: a5b8505209d16d1e560efe8767978ec18db1215489ea0b36127c508f25fc3aff
name: erlang-relx
arch: src
version: 4.10.0
epoch: 0
release: 5.fc45
summary: Release assembler for Erlang/OTP Releases
url: https://github.com/erlware/relx
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-relx-4.10.0-5.fc45.src.rpm
checksum_type: sha256
description:
  Relx assembles releases for an Erlang/OTP release. Given a release
  specification and a list of directories in which to search for OTP applications
  it will generate a release output.


pkgId: 5b1d8b454fb6289804acd56ea5e14e60a9237c2ac78561b1e05e8814c0e5910b
name: erlang-riak_api
arch: src
version: 3.0.16
epoch: 0
release: 2.fc45
summary: Riak Client APIs
url: https://github.com/basho/riak_api
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-riak_api-3.0.16-2.fc45.src.rpm
checksum_type: sha256
description:
  This OTP application encapsulates services for presenting Riak's public-facing
  interfaces. Currently this means a generic interface for exposing Protocol
  Buffers-based services; HTTP services via Webmachine will be moved here at a
  later time.


pkgId: b9b34f9963091ff88e70ec3933cd54766eb21e8d00aaf53017acabab3cc7c52c
name: erlang-riak_ensemble
arch: src
version: 3.0.10
epoch: 0
release: 18.fc45
summary: Multi-Paxos framework in Erlang
url: https://github.com/basho/riak_ensemble
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-riak_ensemble-3.0.10-18.fc45.src.rpm
checksum_type: sha256
description:
  A consensus library that supports creating multiple consensus groups
  (ensembles). Each ensemble is a separate Multi-Paxos instance with its own
  leader, set of members, and state.

  Each ensemble also supports an extended API that provides consistent key/value
  operations. Conceptually, this is identical to treating each key as a separate
  Paxos entity. However, this isn't accomplished by having each key maintain its
  own Paxos group. Instead, an ensemble emulates per-key consensus through a
  combination of per-key and per-ensemble state.


pkgId: 763c7b5f38dc8b77e2384dc4bb737f9e2c233e4bf20fe7f38fe70796d479f6d9
name: erlang-riak_pb
arch: src
version: 3.0.10
epoch: 0
release: 2.fc45
summary: Riak Protocol Buffers Messages
url: https://github.com/basho/riak_pb
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-riak_pb-3.0.10-2.fc45.src.rpm
checksum_type: sha256
description:
  The message definitions for the Protocol Buffers-based interface to Riak and
  various Erlang-specific utility modules for the message types.


pkgId: 5fc0579d1f0271aae93f9cac87f67cb23bdae90168b34ced0e9a4fdf3fcf11f5
name: erlang-riaknostic
arch: src
version: 3.0.10
epoch: 0
release: 7.fc45
summary: A diagnostic tool for Riak installations
url: https://github.com/basho/riaknostic
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-riaknostic-3.0.10-7.fc45.src.rpm
checksum_type: sha256
description:
  A set of tools that diagnoses common problems which could affect a Riak node or
  cluster. When experiencing any problem with Riak, riaknostic should be the
  first thing run during troubleshooting. The tool is a plugin for Riak which can
  be used via the riak-admin script.


pkgId: 4753f78dd09707c9ce8f5efe8091d4a319af10315585e8fb8c65b452ddfffdaa
name: erlang-setup
arch: src
version: 2.2.1
epoch: 0
release: 5.fc45
summary: Generic setup utility for Erlang-based systems
url: https://github.com/uwiger/setup
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-setup-2.2.1-5.fc45.src.rpm
checksum_type: sha256
description:
  While Erlang/OTP comes with many wonderful applications, including the Mnesia
  DBMS, there is no standard or convention for installing a system. Erlang/OTP
  provides tools for building a boot script, and rules for setting environment
  variables, etc., and Mnesia offers an API for creating and modifying the
  database schema.

  However, with no convention for when these tools and API functions are called -
  and by whom - application developers are left having to invent a lot of code
  and scripts, not to mention meditate over chapters of Erlang/OTP documentation
  in order to figure out how things fit together.

  This utility offers a framework for initializing and configuring a system, with
  a set of conventions allowing each component to provide callbacks for different
  steps in the installation procedure.

  The callbacks are defined through OTP application environment variables, which
  can easily be overriden at install time.


pkgId: f970c30d22cbd1992c75612fbf091013c4301d835f1966550409934232701f89
name: erlang-sext
arch: src
version: 1.8.0
epoch: 0
release: 21.fc45
summary: Sortable Erlang Term Serialization
url: https://github.com/uwiger/sext
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-38.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-sext-1.8.0-21.fc45.src.rpm
checksum_type: sha256
description:
  A sortable serialization library This library offers a serialization format (a
  la term_to_binary()) that preserves the Erlang term order.


pkgId: d18456d6799c0c553787090e2b092b43ddaa02e91a7f9d1feb2d4bc07152e8d3
name: erlang-sidejob
arch: src
version: 2.0.2
epoch: 0
release: 25.fc45
summary: An Erlang library that implements a parallel, capacity-limited request pool
url: https://github.com/basho/sidejob
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-sidejob-2.0.2-25.fc45.src.rpm
checksum_type: sha256
description:
  An Erlang library that implements a parallel, capacity-limited request pool. In
  sidejob, these pools are called resources. A resource is managed by multiple
  gen_server like processes which can be sent calls and casts using sidejob:call
  or sidejob:cast respectively.


pkgId: c204831f37d91a16b592ce933446ffa27c202981c64ead5a44c8db0501cad82f
name: erlang-stringprep
arch: src
version: 1.0.34
epoch: 0
release: 2.fc45
summary: A framework for preparing Unicode strings to help input and comparison
url: https://github.com/processone/stringprep
rpm_license: Apache-2.0 and TCL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-stringprep-1.0.34-2.fc45.src.rpm
checksum_type: sha256
description:
  Stringprep is a framework for preparing Unicode test strings in order to
  increase the likelihood that string input and string comparison work. The
  principle are defined in RFC-3454: Preparation of Internationalized Strings.
  This library is leverage Erlang native NIF mechanism to provide extremely fast
  and efficient processing.


pkgId: a3a5da429a6d7ba0419800233a1c9f173e67c0ca467a03419527c6051f90bbed
name: erlang-stun
arch: src
version: 1.2.22
epoch: 0
release: 2.fc45
summary: STUN and TURN library for Erlang / Elixir
url: https://github.com/processone/stun
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erlang-stun-1.2.22-2.fc45.src.rpm
checksum_type: sha256
description:
  STUN and TURN library for Erlang / Elixir. Both STUN (Session Traversal
  Utilities for NAT) and TURN standards are used as techniques to establish media
  connection between peers for VoIP (for example using SIP or Jingle) and WebRTC.


pkgId: b78db974cae83b332e03a4c7648ffc3db26654f005c2b9c71676b4a3622251f2
name: erofs-utils
arch: src
version: 1.9.3
epoch: 0
release: 1.fc45
summary: Utilities for working with EROFS
url: https://erofs.docs.kernel.org/
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/erofs-utils-1.9.3-1.fc45.src.rpm
checksum_type: sha256
description:
  EROFS stands for Enhanced Read-Only File System.  It aims to be a general
  read-only file system solution for various use cases instead of just focusing
  on saving storage space without considering runtime performance.

  This package includes tools to create, check, and extract EROFS images.

rpm_license:
  GPL-2.0-only AND (BSD-2-Clause OR GPL-2.0-only) AND (BSD-2-Clause OR GPL-2.0-or-later) AND (GPL-2.0-or-later OR MIT) AND MIT AND Unlicense


pkgId: 505ca4ea24214177265284fe20c349f78289e97673c5f3d20905a7d2abf2da6d
name: esh
arch: src
version: 0.3.2
epoch: 0
release: 12.fc45
summary: Simple templating engine based on shell
url: https://github.com/jirutka/esh
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/esh-0.3.2-12.fc45.src.rpm
checksum_type: sha256
description:
  esh (embedded shell) is a templating engine for evaluating shell commands
  embedded in arbitrary templates. It’s like ERB (Embedded RuBy) for shell,
  intended to be used for templating configuration files.


pkgId: 26fc5b5593f31e115ee0951fa04434f95f98dc4277f1df49d505fb7b475e8701
name: esmi_ib_library
arch: src
version: 4.3
epoch: 0
release: 4.fc45
summary: E-SMI: EPYC System management Interface In-band Library
url: https://github.com/amd/esmi_ib_library
rpm_license: NCSA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/esmi_ib_library-4.3-4.fc45.src.rpm
checksum_type: sha256
description:
  The EPYC System Management Interface In-band Library, or E-SMI library, is
  part of the EPYC System Management Inband software stack. It is a C library
  for Linux that provides a user space interface to monitor and control the CPU's
  power, energy, performance and other system management features.


pkgId: a8c8719ef915e57e03979937d5cb9443abdf2f292ef8efaa1f0723c771c651a2
name: esmtp
arch: src
version: 1.2
epoch: 0
release: 32.fc45
summary: User configurable send-only Mail Transfer Agent
url: http://esmtp.sourceforge.net/
rpm_license: GPL-1.0-or-later AND GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/esmtp-1.2-32.fc45.src.rpm
checksum_type: sha256
description:
  ESMTP is a user configurable relay-only Mail Transfer Agent (MTA) with a
  sendmail-compatible syntax. It's based on libESMTP supporting the AUTH
  (including the CRAM-MD5 and NTLM SASL mechanisms) and the StartTLS SMTP
  extensions.


pkgId: 003489f4a381e4db4a4ccb5109e57badd459858c15c2db9866c2e48777a8d9db
name: esorex
arch: src
version: 3.13.7
epoch: 0
release: 10.fc45
summary: Recipe Execution Tool of the European Southern Observatory
url: http://www.eso.org/observing/cpl/esorex.html
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/esorex-3.13.7-10.fc45.src.rpm
checksum_type: sha256
description:
  EsoRex is the ESO Recipe Execution Tool. It can list, configure and
  execute CPL-based recipes from the command line.
  One of the features provided by the CPL is the ability to create
  data-reduction algorithms that run as plugins (dynamic libraries). These
  are called recipes and are one of the main aspects of the
  CPL data-reduction development environment.


pkgId: f9e76d5e98ed6a2fe7694d20621b300addb6645458b271ec39beaada1573eb62
name: esound
arch: src
version: 0.2.41
epoch: 1
release: 40.fc45
summary: Allows several audio streams to play on a single audio device
url: https://ftp.gnome.org/pub/GNOME/sources/esound
rpm_license: LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/esound-0.2.41-40.fc45.src.rpm
checksum_type: sha256
description:
  EsounD, the Enlightened Sound Daemon, is a server process that mixes
  several audio streams for playback by a single audio device. For
  example, if you're listening to music on a CD and you receive a
  sound-related event from ICQ, the two applications won't have to
  queue for the use of your sound card.

  Install esound if you'd like to let sound applications share your
  audio device. You'll also need to install the audiofile package.


pkgId: f9db2457390c09bcefc44d940b59e5b3fe93701491bfe9ce11ca81e9f4799d7b
name: espeak
arch: src
version: 1.48.04
epoch: 0
release: 35.fc45
summary: Software speech synthesizer (text-to-speech)
url: http://espeak.sourceforge.net
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/espeak-1.48.04-35.fc45.src.rpm
checksum_type: sha256
description:
  eSpeak is a software speech synthesizer for English and other languages.

  eSpeak produces good quality English speech. It uses a different synthesis
  method from other open source TTS engines, and sounds quite different.
  It's perhaps not as natural or "smooth", but some people may find the
  articulation clearer and easier to listen to for long periods. eSpeak supports
  several languages, however in most cases these are initial drafts and need more
  work to improve them.

  It can run as a command line program to speak text from a file or from stdin.


pkgId: 476e3b4b6bcd442dfc1291feb300e5fd26aee8c490781384f4938580aeef8cac
name: espeak-ng
arch: src
version: 1.52.0
epoch: 0
release: 4.fc45
summary: eSpeak NG Text-to-Speech
url: https://github.com/espeak-ng/espeak-ng
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/espeak-ng-1.52.0-4.fc45.src.rpm
checksum_type: sha256
description:
  The eSpeak NG (Next Generation) Text-to-Speech program is an open source speech
  synthesizer that supports over 70 languages. It is based on the eSpeak engine
  created by Jonathan Duddington. It uses spectral formant synthesis by default
  which sounds robotic, but can be configured to use Klatt formant synthesis
  or MBROLA to give it a more natural sound.

rpm_license:
  GPL-3.0-only AND GPL-3.0-or-later AND Apache-2.0 AND BSD-2-Clause AND Unicode-DFS-2016 AND CC-BY-SA-3.0


pkgId: 713742a34ae19a108ba5dab0e00a3ad46a64a9e8215fd736b4d8083ffa5d0789
name: espresso
arch: src
version: 5.0.1
epoch: 0
release: 5.fc45
summary: Extensible Simulation Package for Research on Soft matter
url: https://espressomd.org
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/espresso-5.0.1-5.fc45.src.rpm
checksum_type: sha256
description:
  ESPResSo can perform Molecular Dynamics simulations of bead-spring models
  in various ensembles ((N,V,E), (N,V,T), and (N,p,T)).
  ESPResSo contains a number of advanced algorithms, e.g.
      * DPD thermostat (for hydrodynamics)
      * P3M, MMM1D, ELC for electrostatic interactions
      * Lattice-Boltzmann for hydrodynamics


pkgId: 62de77c42e80b22eeff7c98431deb52ecc256174ccef4fd315a1f8d8456aadc2
name: esptool
arch: src
version: 5.3.1
epoch: 0
release: 2.fc45
summary: A utility to communicate with the ROM bootloader in Espressif ESP8266 & ESP32
url: https://github.com/espressif/esptool
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/esptool-5.3.1-2.fc45.src.rpm
checksum_type: sha256
description:
  esptool.py A command line utility to communicate with the ROM bootloader in
  Espressif ESP8266 & ESP32 WiFi microcontroller. Allows flashing firmware,
  reading back firmware, querying chip parameters, etc.
  Developed by the community, not by Espressif Systems.


pkgId: 5041bbadceb438a3f10800e794b96495a8f32c7bda176bcfb40a317cc947f00c
name: et
arch: src
version: 6.2.11
epoch: 0
release: 4.fc45
summary: Remote shell that survives IP roaming and disconnect
url: https://mistertea.github.io/EternalTerminal/
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/et-6.2.11-4.fc45.src.rpm
checksum_type: sha256
description:
  Eternal Terminal (ET) is a remote shell that automatically reconnects without
  interrupting the session.


pkgId: 78fc924c122627955cf1fc5abc9bbec7f73947860d23c13c0bf5f0ab7a4c97aa
name: etckeeper
arch: src
version: 1.18.22
epoch: 0
release: 9.fc45
summary: Store /etc in a SCM system (git, mercurial, bzr or darcs)
url: https://etckeeper.branchable.com/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-33.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/etckeeper-1.18.22-9.fc45.src.rpm
checksum_type: sha256
description:
  The etckeeper program is a tool to let /etc be stored in a git,
  mercurial, bzr or darcs repository. It hooks into yum to automatically
  commit changes made to /etc during package upgrades. It tracks file
  metadata that version control systems do not normally support, but that
  is important for /etc, such as the permissions of /etc/shadow. It's
  quite modular and configurable, while also being simple to use if you
  understand the basics of working with version control.

  The default backend is git, if want to use a another backend please
  install the appropriate tool (mercurial, darcs or bzr).
   To use breezy as bzr backend, please also install the etckeeper-brz package.

  To start using the package please read /usr/share/doc/etckeeper/README.


pkgId: c5d6f2c56b0941cd09b6396f02afced3f646a5206d194a9d9b0fbd01a8bac2f5
name: eterm
arch: src
version: 0.9.6
epoch: 0
release: 44.fc45
summary: Enlightened terminal emulator
url: http://www.eterm.org/
rpm_license: LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eterm-0.9.6-44.fc45.src.rpm
checksum_type: sha256
description:
  Eterm is a color vt102 terminal emulator with enhanced graphical
  capabilities.  Eterm is intended to be a replacement for xterm for
  Enlightenment window manager users, but it can also be used as a
  replacement for xterm by users without Enlightenment.  Eterm supports
  various themes and is very configurable, in keeping with the
  philosophy of Enlightenment.


pkgId: 1db07eac02c1a5818d9166004a36728dd835aea680c52c989bf355e34c98a24d
name: ethos
arch: src
version: 0.2.3
epoch: 0
release: 2.fc45
summary: Flexible and efficient proof checker for SMT solvers
url: https://github.com/cvc5/ethos
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ethos-0.2.3-2.fc45.src.rpm
checksum_type: sha256
description:
  The Ethos checker is an efficient and extensible tool for checking proofs of
  Satisfiability Modulo Theories (SMT) solvers.


pkgId: 9d0837528d4ccd3d81772bdfae611104eaae126e71f7b796a3371d91eb74eebe
name: ethq
arch: src
version: 0.7.0
epoch: 0
release: 3.fc45
summary: Ethernet NIC Queue stats viewer
url: https://github.com/isc-projects/ethq
rpm_license: MPL-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ethq-0.7.0-3.fc45.src.rpm
checksum_type: sha256
description:
  Displays an auto-updating per-second count of the number of packets and
  bytes being handled by each specified NIC, and on multi-queue NICs shows
  the per-queue statistics too.


pkgId: 5179d9b2f24cfd63a133290859b0a991450c93559a55f43574240915a60e54f8
name: ethtool
arch: src
version: 7.1
epoch: 2
release: 1.fc45
summary: Settings tool for Ethernet NICs
url: https://www.kernel.org/pub/software/network/ethtool/
rpm_license: GPL-2.0-only AND GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ethtool-7.1-1.fc45.src.rpm
checksum_type: sha256
description:
  This utility allows querying and changing settings such as speed,
  port, auto-negotiation, PCI locations and checksum offload on many
  network devices, especially of Ethernet devices.


pkgId: d06dd8f1fc34dcd6d60fba5aa1ee5e9d55494d7fd7ca6e6e12b19a7a050a7930
name: ettercap
arch: src
version: 0.8.4.1
epoch: 0
release: 3.fc45
summary: Network traffic sniffer/analyser, NCURSES interface version
url: http://ettercap.sourceforge.net
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ettercap-0.8.4.1-3.fc45.src.rpm
checksum_type: sha256
description:
  Ettercap is a suite for man in the middle attacks on LAN. It features
  sniffing of live connections, content filtering on the fly and many other
  interesting tricks. It supports active and passive dissection of many
  protocols (even ciphered ones) and includes many feature for network and host
  analysis.


pkgId: 97bef11c0c11416aa513dff3d019b62112cc60aa7d22185933de34ff23959001
name: eureka
arch: src
version: 2.1.0
epoch: 0
release: 3.fc45
summary: A cross-platform map editor for the classic DOOM games
url: http://eureka-editor.sourceforge.net
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eureka-2.1.0-3.fc45.src.rpm
checksum_type: sha256
description:
  Eureka is a cross-platform map editor for the classic DOOM games.

  It started when the ported the Yadex editor to a proper GUI toolkit, namely
  FLTK, and implemented a system for multi-level Undo / Redo. These and other
  features have required rewriting large potions of the existing code, and adding
  lots of new code too. Eureka is now an independent program with its own
  work-flow and its own quirks.


pkgId: 66530a4f06bb4118770dcd99f2c406b3143565977e2724c49317a27d9a20322e
name: evemu
arch: src
version: 2.7.0
epoch: 0
release: 40.fc45
summary: Event Device Query and Emulation Program
url: http://www.freedesktop.org/wiki/Evemu
rpm_license: GPL-3.0-only AND LGPL-3.0-only AND GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/evemu-2.7.0-40.fc45.src.rpm
checksum_type: sha256
description:
  evemu is a simple utility to capture the event stream from input devices
  and replay that stream on a virtual input device.


pkgId: 0bf2c620f1e93d4f10ced6c8a082710406125f1ae37fcc2dc48657ccbb0022f2
name: eventlog
arch: src
version: 0.2.13
epoch: 0
release: 32.fc45
summary: Syslog-ng v2/v3 support library
url: http://www.balabit.com/network-security/syslog-ng/opensource-logging-system
rpm_license: LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/eventlog-0.2.13-32.fc45.src.rpm
checksum_type: sha256
description:
  The EventLog library aims to be a replacement of the simple syslog() API
  provided on UNIX systems. The major difference between EventLog and syslog
  is that EventLog tries to add structure to messages.

  EventLog provides an interface to build, format and output an event record.
  The exact format and output method can be customized by the administrator
  via a configuration file.

  This package is the runtime part of the library.


pkgId: a798c935e131375dde23088734379dacdd91c42e76888b6f2232388f1a2f3bd3
name: evince
arch: src
version: 48.1
epoch: 0
release: 10.fc45
summary: Document viewer
url: https://wiki.gnome.org/Apps/Evince
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/evince-48.1-10.fc45.src.rpm
checksum_type: sha256
description:
  Evince is simple multi-page document viewer. It can display and print
  Portable Document Format (PDF), PostScript (PS) and Encapsulated PostScript
  (EPS) files. When supported by the document format, evince allows searching
  for text, copying text to the clipboard, hypertext navigation,
  table-of-contents bookmarks and editing of forms.

   Support for other document formats such as DVI and DJVU can be added by
  installing additional backends.

rpm_license:
  GPL-2.0-or-later AND GPL-3.0-or-later AND LGPL-2.0-or-later AND LGPL-2.1-or-later AND X11 AND MIT AND Afmparse


pkgId: 30fa2da1f70ed311be9c8b4e6e633e5f17935e9f4d8a67496a530b3afdb8a4b2
name: evolution
arch: src
version: 3.61.2
epoch: 0
release: 1.fc45
summary: Mail and calendar client for GNOME
url: https://gitlab.gnome.org/GNOME/evolution/-/wikis/home
rpm_license: GPL-2.0-or-later AND GFDL-1.3-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/evolution-3.61.2-1.fc45.src.rpm
checksum_type: sha256
description:
  Evolution is the GNOME mailer, calendar, contact manager and
  communications tool.  The components which make up Evolution
  are tightly integrated with one another and act as a seamless
  personal information-management tool.


pkgId: 2cf39703204d20f436bbe7284a66167890027091e0e22bc8fdaea5fb8115ad23
name: evolution-data-server
arch: src
version: 3.61.2
epoch: 0
release: 1.fc45
summary: Backend data server for Evolution
url: https://gitlab.gnome.org/GNOME/evolution/-/wikis/home
rpm_license: LGPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/evolution-data-server-3.61.2-1.fc45.src.rpm
checksum_type: sha256
description:
  The evolution-data-server package provides a unified backend for programs that work
  with contacts, tasks, and calendar information.

  It was originally developed for Evolution (hence the name), but is now used
  by other packages.


pkgId: 5f6c26afd28909759cb53fbc74ae7cc4e3baeb34db3c55020145d0ecb4a67bc2
name: evolution-ews
arch: src
version: 3.61.2
epoch: 0
release: 1.fc45
summary: Evolution extension for Exchange Web Services
url: https://gitlab.gnome.org/GNOME/evolution/-/wikis/home
rpm_license: LGPL-2.1-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/evolution-ews-3.61.2-1.fc45.src.rpm
checksum_type: sha256
description:
  This package allows Evolution to interact with Microsoft Exchange servers,
  versions 2007 and later, through its Exchange Web Services (EWS) interface.


pkgId: c01a00870dc9a7efc3e85bdcf4323cd09627d95dc6914a3c892f8fb78e2fd9ac
name: evolution-rspam
arch: src
version: 0.6.0
epoch: 0
release: 66.fc45
summary: Evolution Plugin for reporting spam
url: http://gnome.eu.org/evo/index.php/Report_as_Spam
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/evolution-rspam-0.6.0-66.fc45.src.rpm
checksum_type: sha256
description:
  Rspam Evolution Plugin enables Evolution Mail client to report email messages
  as spam to checksum-based and statistical filtering networks.
  It supports Razor network, DCC, SpamCop and Pyzor.
  This plugins requires a pretty new version of evolution to build.
  See README for more information about required programs.


pkgId: 7183b92eb65620922270a68ca0673545f33de6ae73d485da4ffabd6da71c7c80
name: evtest
arch: src
version: 1.36
epoch: 0
release: 3.fc45
summary: Event device test program
url: http://gitlab.freedesktop.org/libevdev/evtest/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/evtest-1.36-3.fc45.src.rpm
checksum_type: sha256
description:
  evtest is a simple utility to query information about input devices
  and watch the event stream generated by input devices.


pkgId: 2ca579bd78b55191ef8e54e9430237af26933412bdfb4f9350f444d7afbb0cc3
name: evtgen
arch: src
version: 3.00.00b1
epoch: 0
release: 9.fc45
summary: Event generator for particle physics
url: https://evtgen.hepforge.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/evtgen-3.00.00b1-9.fc45.src.rpm
checksum_type: sha256
description:
  EvtGen is a Monte Carlo event generator that simulates the decays
  of heavy flavor particles, primarily B and D mesons. It contains
  a range of decay models for intermediate and final states
  containing scalar, vector and tensor mesons or resonances, as well
  as leptons, photons and baryons. Decay amplitudes are used to
  generate each branch of a given full decay tree, taking into
  account angular and time-dependent correlations which allows for
  the simulation of CP-violating processes.


pkgId: 3f5aa1f728b447be753ec5d21d035aebf2173d560b7e2da2f17ec14903b3a960
name: exaile
arch: src
version: 4.2.2
epoch: 0
release: 2.fc45
summary: Simple but powerful Amarok-style music player for GTK users
url: http://www.exaile.org
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/exaile-4.2.2-2.fc45.src.rpm
checksum_type: sha256
description:
  Exaile is a music player with a simple interface and powerful music
  management capabilities. Features include automatic fetching of album art,
  lyrics fetching, streaming internet radio, tabbed playlists, smart
  playlists with extensive filtering/search capabilities, and much more.

  Exaile is written using Python and GTK+ and is easily extensible via
  plugins. There are over 50 plugins distributed with Exaile that include
  advanced track tagging, last.fm scrobbling, support for portable media
  players, podcasts, internet radio such as icecast and Soma.FM,
  ReplayGain, output via a secondary output device (great for DJs!), and
  much more.


pkgId: 7107545b90f51529ef39b9fa53e42eb9c4a336d24a37c6ff400cc5325f24611a
name: execstack
arch: src
version: 0.5.0
epoch: 0
release: 33.fc45
summary: Utility to set/clear/query executable stack bit
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/execstack-0.5.0-33.fc45.src.rpm
checksum_type: sha256
description:
  This package is built from prelink sources but contains just the
  execstack binary. It can be used manipulate ELF binaries to run
  with or without executable stack.


pkgId: 2fd84e6830368474a76b218d33fb2c6bbc6952ca0b1f37eb08051ca38731f1e6
name: exempi
arch: src
version: 2.6.4
epoch: 0
release: 10.fc45
summary: Library for easy parsing of XMP metadata
url: http://libopenraw.freedesktop.org/wiki/Exempi
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/exempi-2.6.4-10.fc45.src.rpm
checksum_type: sha256
description:
  Exempi provides a library for easy parsing of XMP metadata. It is a port of
  Adobe XMP SDK to work on UNIX and to be build with GNU automake.
  It includes XMPCore and XMPFiles.


pkgId: 4f024ddfbf99268c38e7623b8352c500f73197b0d9a13ef81f1de902629f5244
name: exercism
arch: src
version: 3.5.8
epoch: 0
release: 5.fc45
summary: Exercism command-line interface
url: https://github.com/exercism/cli
rpm_license: Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND ISC AND MIT AND MPL-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/exercism-3.5.8-5.fc45.src.rpm
checksum_type: sha256
description:
  Exercism provides a way to do the problems on https://exercism.io.

  This CLI ships as a binary with no additional run-time requirements. This means
  that if you're doing the Haskell problems on exercism you don't need a working
  Python or Ruby environment simply to fetch and submit exercises.


pkgId: 318b721516157677d4d71eb05f9735423b10002ac46d830d8c7f373e2f2ce8e1
name: exim
arch: src
version: 4.99.4
epoch: 0
release: 4.fc45
summary: The exim mail transfer agent
url: https://www.exim.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/exim-4.99.4-4.fc45.src.rpm
checksum_type: sha256
description:
  Exim is a message transfer agent (MTA) developed at the University of
  Cambridge for use on Unix systems connected to the Internet. It is
  freely available under the terms of the GNU General Public Licence. In
  style it is similar to Smail 3, but its facilities are more
  general. There is a great deal of flexibility in the way mail can be
  routed, and there are extensive facilities for checking incoming
  mail. Exim can be installed in place of sendmail, although the
  configuration of exim is quite different to that of sendmail.


pkgId: ea2439c1ac84559a3a2c9b44143128ad65b07b4559d9276e89a37e2dc9e34059
name: exim-doc
arch: src
version: 4.73
epoch: 0
release: 31.fc45
summary: Documentation for the exim mail transfer agent
url: http://www.exim.org/
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/exim-doc-4.73-31.fc45.src.rpm
checksum_type: sha256
description:
  Exim is a mail transport agent (MTA) developed at the University of
  Cambridge for use on Unix systems connected to the Internet. This
  package contains the documentation for Exim, also available on the
  web at http://www.exim.org/


pkgId: 64e6e509cf5a13915884f9ebbb95d5fabc1d51f0b57cab451b6a1308562e8ccc
name: exiv2
arch: src
version: 0.28.6
epoch: 0
release: 4.fc45
summary: Exif, IPTC and XMP metadata manipulation library
url: http://www.exiv2.org/
rpm_license: GPL-2.0-or-later AND BSD-3-Clause AND LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/exiv2-0.28.6-4.fc45.src.rpm
checksum_type: sha256
description:
  A command line utility to access image metadata, allowing one to:
  * print the Exif metadata of Jpeg images as summary info, interpreted values,
    or the plain data for each tag
  * print the Iptc metadata of Jpeg images
  * print the Jpeg comment of Jpeg images
  * set, add and delete Exif and Iptc metadata of Jpeg images
  * adjust the Exif timestamp (that's how it all started...)
  * rename Exif image files according to the Exif timestamp
  * extract, insert and delete Exif metadata (including thumbnails),
    Iptc metadata and Jpeg comments


pkgId: 495b7271f4f784d7a8a0f4d70f54175dd264b8723c921d843ea32087aa96136f
name: expat
arch: src
version: 2.8.1
epoch: 0
release: 2.fc45
summary: An XML parser library
url: https://libexpat.github.io/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/expat-2.8.1-2.fc45.src.rpm
checksum_type: sha256
description:
  This is expat, the C library for parsing XML, written by James Clark. Expat
  is a stream oriented XML parser. This means that you register handlers with
  the parser prior to starting the parse. These handlers are called when the
  parser discovers the associated structures in the document being parsed. A
  start tag is an example of the kind of structures for which you may
  register handlers.


pkgId: 6a1337563649502d91d2e15fa1fe268cfa777aa04b08704630498624e4caede8
name: expatpp
arch: src
version: 0
epoch: 0
release: 0.40.20120624svn6.fc45
summary: C++ layer for expat
url: http://sourceforge.net/projects/expatpp/
rpm_license: MPL-1.1
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/expatpp-0-0.40.20120624svn6.fc45.src.rpm
checksum_type: sha256
description:
  Expatpp is a simple C++ layer to make using the open source expat XML parsing
  library vastly easier for complex schemas. It has been used widely in industry
  including the Valve Steam project.


pkgId: 57330eae4f3d4736248d5829679c32cb91370186b88208c638ff29553909ca9f
name: expect
arch: src
version: 5.45.4
epoch: 0
release: 33.fc45
summary: A program-script interaction and testing utility
url: https://core.tcl.tk/expect/index
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/expect-5.45.4-33.fc45.src.rpm
checksum_type: sha256
description:
  Expect is a tcl application for automating and testing
  interactive applications such as telnet, ftp, passwd, fsck,
  rlogin, tip, etc. Expect makes it easy for a script to
  control another program and interact with it.

  This package contains expect and some scripts that use it.


pkgId: 8ac475655ba617df7d995cd314c74d07d245a415ba1be03ef41c8ec2ac22426d
name: extra-enforcer-rules
arch: src
version: 1.12.0
epoch: 0
release: 2.fc45
summary: Extra rules for maven-enforcer-plugin
url: https://github.com/mojohaus/extra-enforcer-rules
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/extra-enforcer-rules-1.12.0-2.fc45.src.rpm
checksum_type: sha256
description:
  Apache's Maven Enforcer Plugin is used to apply and enforce rules on Maven
  projects. The Enforcer plugin ships with a set of standard rules. This project
  provides extra rules which are not part of the standard rule set.


pkgId: 8c07d0251ca5e2570c85856705822cc1cb73dd45aec4e05f655ba325d7a0a434
name: extractpdfmark
arch: src
version: 1.1.1
epoch: 0
release: 14.fc45
summary: Extract page mode and named destinations as PDFmark from PDF
url: https://github.com/trueroad/extractpdfmark/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/extractpdfmark-1.1.1-14.fc45.src.rpm
checksum_type: sha256
description:
  When you create a PDF document using something like a TeX system you may include
  many small PDF files in the main PDF file. It is common for each of the small
  PDF files to use the same fonts.

  If the small PDF files contain embedded font subsets, the TeX system includes
  them as-is in the main PDF. As a result, several subsets of the same font are
  embedded in the main PDF. It is not possible to remove the duplicates since they
  are different subsets. This vastly increases the size of the main PDF file.

  On the other hand, if the small PDF files contain embedded full font sets, the
  TeX system also includes all of them in the main PDF. This time, the main PDF
  contains duplicates of the same full sets of fonts. Therefore, Ghostscript can
  remove the duplicates. This may considerably reduce the main PDF-file's size.

  Finally, if the small PDF files contain some fonts that are not embedded, the
  TeX system outputs the main PDF file with some fonts missing. In this case,
  Ghostscript can embed the necessary fonts. It can significantly reduce the
  required disk size.

  Either way, when Ghostscript reads the main PDF produced by the TeX system and
  outputs the final PDF it does not preserve PDF page-mode and named-destinations
  etc. As a result, when you open the final PDF, it is not displayed correctly.
  Also, remote PDF links will not work correctly.

  This program is able to extract page mode and named destinations as PDFmark from
  PDF. By using this you can get the small PDF files that have preserved them.


pkgId: 00f90871bc438c906298914cfd66b00731e9e1a3acc5b6669a960e204022817e
name: extrema
arch: src
version: 4.4.5
epoch: 0
release: 45.fc45
summary: A powerful visualization and data analysis tool
url: http://exsitewebware.com/extrema/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/extrema-4.4.5-45.fc45.src.rpm
checksum_type: sha256
description:
  Extrema is a powerful visualization and data analysis tool that
  enables researchers to quickly distill their large, complex data sets
  into meaningful information. Its flexibility, sophistication, and
  power allow you to easily develop your own commands and create highly
  customized graphs.


pkgId: 1f9bf575e2fbdf1da02a451c6859b5045d1f6af5701aa55ca5a048c0fc44f451
name: extundelete
arch: src
version: 0.2.4
epoch: 0
release: 30.fc45
summary: Utility to recover deleted files from ext3 and ext4 filesystem
url: https://extundelete.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/extundelete-0.2.4-30.fc45.src.rpm
checksum_type: sha256
description:
  extundelete is a utility that can recover deleted files from an ext3 or ext4
  partition. extundelete uses the information stored in the partition's journal
  to attempt to recover a file that has been deleted from the partition. There is
  no guarantee that any particular file will be able to be undeleted, so always
  try to have a good backup system in place, or at least put one in place after
  recovering your files!

  Important: A deleted file can most likely not be recovered on ext4 filesystems
  when it has been created using the features "64bit" and/or "metadata_csum". As
  extundelete is no longer maintained by upstream, the practical use is limited.


pkgId: 00daf98ddb6ac2e53cfadee6a42a4f9dbb8409b0388d9e78a8f58c074e3a675e
name: ezstream
arch: src
version: 1.0.2
epoch: 0
release: 16.fc45
summary: Command line source client for Icecast media streaming servers
url: https://www.icecast.org/ezstream/
rpm_license: GPL-2.0-only AND ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/e/ezstream-1.0.2-16.fc45.src.rpm
checksum_type: sha256
description:
  Ezstream is a command line source client for media streams, primarily for
  streaming to Icecast servers.

  It allows the creation of media streams based on input from files or standard
  input that is piped through an optional external decoder and encoder. As every
  part of this chain is highly configurable, ezstream can be useful in a large
  number of streaming setups.

  Supported media containers for streaming are MP3, Ogg, Theora, WebM, and
  Matroska. Supported transport protocols are HTTP, ICY, and RoarAudio.
  Metadata support is provided by TagLib library.


pkgId: 7ddb750a951dc48ae82bbd007a9ac4f3df8897a47f19ce72ebaaf2e772169b0f
name: f21-backgrounds
arch: src
version: 21.1.0
epoch: 0
release: 25.fc45
summary: Fedora 21 default desktop background
url: https://fedoraproject.org/wiki/F21_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f21-backgrounds-21.1.0-25.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 21 default theme.
  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 863eb4ae415d328377f5a572002ca437d75a9e0b625534095d88a4cafa6027a6
name: f22-backgrounds
arch: src
version: 22.1.1
epoch: 0
release: 23.fc45
summary: Fedora 22 default desktop background
url: https://fedoraproject.org/wiki/F22_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f22-backgrounds-22.1.1-23.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 22 default theme.
  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: a8d46fe82a05361e241db498a3f53a7a3dbd349d8ca58d5372a5094e82804883
name: f23-backgrounds
arch: src
version: 23.1.0
epoch: 0
release: 25.fc45
summary: Fedora 23 default desktop background
url: https://fedoraproject.org/wiki/F23_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f23-backgrounds-23.1.0-25.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 23 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 7213c93c3dba02da5a1155a6a54a4f2c999060611efd7ac29f3bd308aa9ce990
name: f24-backgrounds
arch: src
version: 24.1.2
epoch: 0
release: 24.fc45
summary: Fedora 24 default desktop background
url: https://fedoraproject.org/wiki/F24_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f24-backgrounds-24.1.2-24.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 24 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: b058eba10813f674cf2c10723756806ecde51fd0ca94ac363196871bc6e47093
name: f25-backgrounds
arch: src
version: 25.1.1
epoch: 0
release: 25.fc45
summary: Fedora 25 default desktop background
url: https://fedoraproject.org/wiki/F25_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f25-backgrounds-25.1.1-25.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 25 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: dc52a74584966180ba9eb3cda54694eb01b3e494cf4b6796f850ea616cb1af6f
name: f26-backgrounds
arch: src
version: 26.2.7
epoch: 0
release: 23.fc45
summary: Fedora 26 default desktop background
url: https://fedoraproject.org/wiki/F26_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-13.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f26-backgrounds-26.2.7-23.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 26 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 1e25c482b5fb9189725e3c422c4ae08d5fd3e4a42762d527c2c70e867602d30b
name: f27-backgrounds
arch: src
version: 27.0.1
epoch: 0
release: 22.fc45
summary: Fedora 27 default desktop background
url: https://fedoraproject.org/wiki/F27_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f27-backgrounds-27.0.1-22.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 27 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: a2bccd7b0a4a8dbb389fb0bc54803bd9920cd0f88b5612e7a67a3839087123c4
name: f28-backgrounds
arch: src
version: 28.1.5
epoch: 0
release: 20.fc45
summary: Fedora 28 default desktop background
url: https://fedoraproject.org/wiki/F28_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f28-backgrounds-28.1.5-20.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 28 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: d5fa13f7d396eed8a1052bee0fd74edae1425bbaf82fc8e7e87ca972f33cb4bf
name: f29-backgrounds
arch: src
version: 29.1.3
epoch: 0
release: 20.fc45
summary: Fedora 29 default desktop background
url: https://fedoraproject.org/wiki/F29_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f29-backgrounds-29.1.3-20.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 29 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 1c63b5a68f9fdbab9e62a2474a8a9a0745fab0f49355d775691d47c7b89c3d2e
name: f2c
arch: src
version: 20210928
epoch: 0
release: 14.fc45
summary: A Fortran 77 to C/C++ conversion program
url: http://www.netlib.org/f2c/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f2c-20210928-14.fc45.src.rpm
checksum_type: sha256
description:
  F2c converts Fortran 77 source code to C or C++ source files. If no
  Fortran files are named on the command line, f2c can read Fortran from
  standard input and write C to standard output.


pkgId: e6d4af991c472bab84f0557a5dcbdaabd12c1ff01bce5725c9972f4ca11616ec
name: f2fs-tools
arch: src
version: 1.16.0
epoch: 0
release: 11.fc45
summary: Tools for Flash-Friendly File System (F2FS)
url: http://sourceforge.net/projects/f2fs-tools/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f2fs-tools-1.16.0-11.fc45.src.rpm
checksum_type: sha256
description:
  NAND flash memory-based storage devices, such as SSD, and SD cards,
  have been widely being used for ranging from mobile to server systems.
  Since they are known to have different characteristics from the
  conventional rotational disks,a file system, an upper layer to
  the storage device, should adapt to the changes
  from the sketch.

  F2FS is a new file system carefully designed for the
  NAND flash memory-based storage devices.
  We chose a log structure file system approach,
  but we tried to adapt it to the new form of storage.
  Also we remedy some known issues of the very old log
  structured file system, such as snowball effect
  of wandering tree and high cleaning overhead.

  Because a NAND-based storage device shows different characteristics
  according to its internal geometry or flash memory management
  scheme aka FTL, we add various parameters not only for configuring
  on-disk layout, but also for selecting allocation
  and cleaning algorithms.


pkgId: 64d529f0a46d6392084b14fa578c3938374a26aec370de4ff0fe697fc7fb9005
name: f3
arch: src
version: 9.0
epoch: 0
release: 4.fc45
summary: Utility to test for fake flash drives and cards
url: https://oss.digirati.com.br/f3/
rpm_license: GPL-3.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f3-9.0-4.fc45.src.rpm
checksum_type: sha256
description:
  F3 is a utility to test for fake flash drives and cards. It is a Free
  Software alternative to h2testw.  f3write will fill the unused part of
  a filesystem with files NNNN.fff with known content, and f3read will
  analyze the files to determine whether the contents are corrupted, as
  happens with fake flash.


pkgId: 021cd9b7499368e49d3be253acf52d7d25b22190aae3cddac885f5a43fde3e74
name: f30-backgrounds
arch: src
version: 30.1.2
epoch: 0
release: 19.fc45
summary: Fedora 30 default desktop background
url: https://fedoraproject.org/wiki/F30_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f30-backgrounds-30.1.2-19.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 30 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 885abf4a5be9073ac3bd3d22852379f9901edcd7dd432c0dccbe0350e3d918ea
name: f31-backgrounds
arch: src
version: 31.0.4
epoch: 0
release: 18.fc45
summary: Fedora 31 default desktop background
url: https://fedoraproject.org/wiki/F31_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f31-backgrounds-31.0.4-18.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 31 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: b1e192589bb7a94afc87b34cd9677bb998cd2e05a1690833e89c2c17ce6fa52c
name: f32-backgrounds
arch: src
version: 32.2.2
epoch: 0
release: 17.fc45
summary: Fedora 32 default desktop background
url: https://fedoraproject.org/wiki/F32_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-44.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f32-backgrounds-32.2.2-17.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora 32 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 899b96bf95397d744a124e57600d20bbf1006fb795fe4fafa15ddc454482af2d
name: f33-backgrounds
arch: src
version: 33.0.8
epoch: 0
release: 18.fc45
summary: Fedora 33 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f33-backgrounds-33.0.8-18.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  33 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 829d155c1b4e6d5c762c8f2f36bd6e33ad7564e6a47a85c31979f1a21d9a6671
name: f34-backgrounds
arch: src
version: 34.0.1
epoch: 0
release: 17.fc45
summary: Fedora 34 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-47.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f34-backgrounds-34.0.1-17.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  34 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 31ab97b0aa974b5b9e5dc0f8278154ee91f4c401577641c3ee8804a642d21c97
name: f35-backgrounds
arch: src
version: 35.0.1
epoch: 0
release: 16.fc45
summary: Fedora 35 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f35-backgrounds-35.0.1-16.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  35 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 703011da4ce667c7dc499e09b50b43804ad5b811a804851333a0b3dda429917f
name: f36-backgrounds
arch: src
version: 36.1.1
epoch: 0
release: 12.fc45
summary: Fedora 36 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f36-backgrounds-36.1.1-12.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  36 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 053768307923c7a451e0dee7072933bc9248b93764af4addf491ad2bde7bfd07
name: f37-backgrounds
arch: src
version: 37.0.5
epoch: 0
release: 9.fc45
summary: Fedora 37 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f37-backgrounds-37.0.5-9.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  37 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 5dddb361369d234ee8f2464483a513ff5db658cb5a7471842b6501de8fd48b6e
name: f38-backgrounds
arch: src
version: 38.1.1
epoch: 0
release: 10.fc45
summary: Fedora 38 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f38-backgrounds-38.1.1-10.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  38 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: ef154e31739963535184cce4f30b0c1c398f09ae5ced53640094250941493b13
name: f39-backgrounds
arch: src
version: 39.0.5
epoch: 0
release: 8.fc45
summary: Fedora 39 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f39-backgrounds-39.0.5-8.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  39 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 0be622e3901bb6c1319d9582c37be9b596494c614585671b9931ceb7a3abc394
name: f3d
arch: src
version: 3.5.0
epoch: 0
release: 6.fc45
summary: Fast and minimalist 3D viewer
url: https://github.com/f3d-app/f3d
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f3d-3.5.0-6.fc45.src.rpm
checksum_type: sha256
description:
  F3D is a fast and minimalist 3D viewer desktop application. It supports many
  file formats, from digital content to scientific datasets (including glTF, USD,
  STL, STEP, PLY, OBJ, FBX, Alembic), can show animations and support thumbnails
  and many rendering and texturing options including real time physically based
  rendering and raytracing.

  It is fully controllable from the command line and support configuration files.
  It can provide thumbnails, support interactive hotkeys, drag&drop and
  integration into file managers.

  F3D also contains the libf3d, a simple library to render meshes, with C++ and
  Python Bindings, as well as experimental Java and Javascript bindings.


pkgId: 83e54a0e055f0e8a462e35f7857d4b8cc908505e425e086d4eca30a5ec255585
name: f40-backgrounds
arch: src
version: 40.2.0
epoch: 0
release: 6.fc45
summary: Fedora 40 default desktop background
url: https://fedoraproject.org/wiki/_Artwork
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f40-backgrounds-40.2.0-6.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  40 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 34a4f9640e25317f7899edb8a43b04aa2fae7570a4fb4d6933f2aaa5cf4d35c6
name: f41-backgrounds
arch: src
version: 41.0.2
epoch: 0
release: 4.fc45
summary: Fedora 41 default desktop background
url: https://fedoraproject.org/wiki/Design
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f41-backgrounds-41.0.2-4.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  41 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: b2810f6c1cec38436817328adf35fc7d09e9a7f9c25110a74cdc9af055ed09c8
name: f42-backgrounds
arch: src
version: 42.0.0
epoch: 0
release: 6.fc45
summary: Fedora 42 default desktop background
url: https://fedoraproject.org/wiki/Design
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f42-backgrounds-42.0.0-6.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  42 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 6f5f24e9211a7e40ecc0291f7d3bb1e665bdbd66ef4deeb0b922ac559400a8ad
name: f43-backgrounds
arch: src
version: 43.0.4
epoch: 0
release: 2.fc45
summary: Fedora 43 default desktop background
url: https://fedoraproject.org/wiki/Design
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f43-backgrounds-43.0.4-2.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  43 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: cc3bbdcf697708bbfdb42471b5a28c65edb7e00428124b203436600892f2e51f
name: f44-backgrounds
arch: src
version: 44.0.0
epoch: 0
release: 2.fc45
summary: Fedora 44 default desktop background
url: https://fedoraproject.org/wiki/Design
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f44-backgrounds-44.0.0-2.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  44 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 375f1763c2bcc218b2909991800448db245e6500205f88656b39a27ede215446
name: f45-backgrounds
arch: src
version: 45.0.3
epoch: 0
release: 1.fc45
summary: Fedora 45 default desktop background
url: https://fedoraproject.org/wiki/Design
rpm_license: CC-BY-SA-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/f45-backgrounds-45.0.3-1.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora  45 default
  theme.  Pulls in themes for GNOME, KDE, Mate and Xfce desktops.


pkgId: 2e6f2a74c80f28eb5b2d3150644ffb240b5ef285640263db32c64111ed915592
name: faad2
arch: src
version: 2.11.2
epoch: 1
release: 7.fc45
summary: Library and frontend for decoding MPEG2/4 AAC
url: https://github.com/knik0/faad2/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/faad2-2.11.2-7.fc45.src.rpm
checksum_type: sha256
description:
  FAAD 2 is a LC, MAIN and LTP profile, MPEG2 and MPEG-4 AAC decoder, completely
  written from scratch.


pkgId: b4b41c3ac9f93475de3770d5e5606aecfd734770c74cd9466d1332a511d7c447
name: fabtests
arch: src
version: 2.5.1
epoch: 0
release: 3.fc45
summary: Test suite for libfabric API
url: https://github.com/ofiwg/libfabric
rpm_license: (BSD-2-Clause OR GPL-2.0-only) AND MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fabtests-2.5.1-3.fc45.src.rpm
checksum_type: sha256
description:
  Fabtests provides a set of examples that uses libfabric - a high-performance
  fabric software library.


pkgId: eef0ab30641d2b69c7a73ef1b6c14b46bace7fcb6fa7be0f3beb0635f469d85a
name: facter
arch: src
version: 4.9.0
epoch: 0
release: 8.fc45
summary: Command and ruby library for gathering system information
url: https://github.com/puppetlabs/facter
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/facter-4.9.0-8.fc45.src.rpm
checksum_type: sha256
description:
  Facter is a lightweight program that gathers basic node information about the
  hardware and operating system. Facter is especially useful for retrieving
  things like operating system names, hardware characteristics, IP addresses, MAC
  addresses, and SSH keys.

  Facter is extensible and allows gathering of node information that may be
  custom or site specific. It is easy to extend by including your own custom
  facts. Facter can also be used to create conditional expressions in Puppet that
  key off the values returned by facts.


pkgId: d74769242a6f55186296f2a15c30222fe26e0d227f8cde001a68115aaa86d848
name: fail2ban
arch: src
version: 1.1.0
epoch: 0
release: 19.fc45
summary: Daemon to ban hosts that cause multiple authentication errors
url: https://www.fail2ban.org
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-40.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fail2ban-1.1.0-19.fc45.src.rpm
checksum_type: sha256
description:
  Fail2Ban scans log files and bans IP addresses that makes too many password
  failures. It updates firewall rules to reject the IP address. These rules can
  be defined by the user. Fail2Ban can read multiple log files such as sshd or
  Apache web server ones.

  Fail2Ban is able to reduce the rate of incorrect authentications attempts
  however it cannot eliminate the risk that weak authentication presents.
  Configure services to use only two factor or public/private authentication
  mechanisms if you really want to protect services.

  This is a meta-package that will install the default configuration.  Other
  sub-packages are available to install support for other actions and
  configurations.


pkgId: d998036a5ff18ea41036ff8c406391e50854d2dbcd7b0ba97e79514577a5d1c5
name: fakechroot
arch: src
version: 2.20.1
epoch: 0
release: 25.fc45
summary: Gives a fake chroot environment
url: https://github.com/dex4er/fakechroot
rpm_license: LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fakechroot-2.20.1-25.fc45.src.rpm
checksum_type: sha256
description:
  fakechroot runs a command in an environment were is additionally
  possible to use the chroot(8) call without root privileges. This is
  useful for allowing users to create their own chrooted environment
  with possibility to install another packages without need for root
  privileges.


pkgId: 14e74880baf7f417184d444561a0559377efc1ec14f602ba95233ae0d7a5b709
name: fakeroot
arch: src
version: 1.37.1
epoch: 0
release: 5.fc45
summary: Gives a fake root environment
url: https://tracker.debian.org/pkg/fakeroot
rpm_license: GPL-3.0-or-later AND LicenseRef-Callaway-LGPLv2+ AND (GPL-1.0-or-later OR Artistic-1.0-Perl)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fakeroot-1.37.1-5.fc45.src.rpm
checksum_type: sha256
description:
  fakeroot runs a command in an environment wherein it appears to have
  root privileges for file manipulation. fakeroot works by replacing the
  file manipulation library functions (chmod(2), stat(2) etc.) by ones
  that simulate the effect the real library functions would have had,
  had the user really been root.


pkgId: 6162c6ad0f2224057ad99ea74f12c80628fedba273ad8e91386f3ccaa39cccf6
name: faketpm
arch: src
version: 0.0.1
epoch: 0
release: 9.fc45
summary: Fake TPM for systems that lack a real one
url: https://github.com/davide125/faketpm
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/faketpm-0.0.1-9.fc45.src.rpm
checksum_type: sha256
description:
  This project provides a fake Trusted Platform Module (TPM) for systems that
  lack a real one. To do so it leverages SWTPM, a software TPM emulator.


pkgId: 79a4c19939f676b0db51a61e467e78298f76bb838e1f6340dc9cd0920f261008
name: falkon
arch: src
version: 26.07.90
epoch: 0
release: 1.fc45
summary: Modern web browser
url: https://www.falkon.org/
rpm_license: GPL-3.0-or-later AND LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-13.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/falkon-26.07.90-1.fc45.src.rpm
checksum_type: sha256
description:
  Falkon is a modern web browser based on QtWebEngine (which is itself based on
  the Chromium core, i.e., Blink) and the Qt framework. It is designed to be
  lightweight and fast and offers advanced functions such as
  - an integrated advertisement blocker,
  - a search engine manager,
  - a SSL certificate manager,
  - speed dial
  - theming support, and
  - seamless integration into your desktop environment.


pkgId: 7629451b017427441a6f2afbe0399f5bd65fe4be518d9225749cf9fc7a0fceb9
name: fancontrol-gui
arch: src
version: 0.8
epoch: 0
release: 11.20220606git5bfa8fa.fc45
summary: GUI for fancontrol
url: https://github.com/Maldela/fancontrol-gui
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fancontrol-gui-0.8-11.20220606git5bfa8fa.fc45.src.rpm
checksum_type: sha256
description:
  GUI for fancontrol which is part of lm_sensors.
  It uses the KAuth module of the KDE Frameworks 5 to write the
  generated config file. Furthermore it communicates with systemd
  via dbus to control the fancontrol service.


pkgId: 26d0e3020cd5a94cbe5325c68aec3ab347a2730f610bcd60e75abbd3545e84b8
name: fann
arch: src
version: 2.2.0
epoch: 0
release: 40.fc45
summary: A fast artificial neural network library
url: http://leenissen.dk/fann/wp/
rpm_license: LGPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fann-2.2.0-40.fc45.src.rpm
checksum_type: sha256
description:
  Fast Artificial Neural Network (FANN) Library is written in ANSI C.
  The library implements multilayer feedforward ANNs, up to 150 times faster
  than other libraries. FANN supports execution in fixed point, for fast
  execution on systems like the iPAQ.


pkgId: 7552af92106a9508708fccb202bc7ecf4f1cb3c53b92385559612dc8efc6ce3d
name: fantasdic
arch: src
version: 1.0
epoch: 0
release: 0.30.beta7.fc45
summary: Dictionary application using Ruby
url: http://www.gnome.org/projects/fantasdic/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fantasdic-1.0-0.30.beta7.fc45.src.rpm
checksum_type: sha256
description:
  Fantasdic is a dictionary application. It allows to look up words in
  various dictionary sources. It is primarily targetting the GNOME
  desktop but it should work with other platforms, including Windows.
  Fantasdic is Free Software.


pkgId: de49ccc3a10f076138c41578ea3fe0db40cc5ef6685c904e7c91d27c25c191f2
name: fapg
arch: src
version: 0.45
epoch: 0
release: 8.fc45
summary: Fast Audio Playlist Generator
url: http://royale.zerezo.com/fapg/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fapg-0.45-8.fc45.src.rpm
checksum_type: sha256
description:
  FAPG means Fast Audio Playlist Generator.
  It is a tool to generate list of audio files (Wav, MP3, Ogg, etc)
  in various formats (M3U, PLS, HTML, etc).
  It is very useful if you have a large amount of audio files
  and you want to quickly and frequently build a playlist.

  It is coded in C to be as fast as possible, and does not use
  any specific audio library (like ID3Lib).
  This allows you to deploy it faster and easier, and to have
  better performance since less information is loaded.
  On the other hand, this tool is not (yet) compatible with
  all the known formats.


pkgId: 0576de174c6dec37777e9129e85fddf85d527cb5759e49fadba9f2dad8f50521
name: fapolicyd
arch: src
version: 2.0
epoch: 0
release: 1.fc45
summary: Application Whitelisting Daemon
url: https://github.com/linux-application-whitelisting/fapolicyd
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fapolicyd-2.0-1.fc45.src.rpm
checksum_type: sha256
description:
  Fapolicyd (File Access Policy Daemon) implements application whitelisting
  to decide file access rights. Applications that are known via a reputation
  source are allowed access while unknown applications are not. The daemon
  makes use of the kernel's fanotify interface to determine file access rights.


pkgId: 1a3a55e270cde19e3febddec841ba436fc36d806532be02ddd1089e9421a96c6
name: fast-cdr
arch: src
version: 2.3.6
epoch: 0
release: 2.fc45
summary: Fast Common Data Representation (CDR) Serialization Library
url: http://www.eprosima.com
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fast-cdr-2.3.6-2.fc45.src.rpm
checksum_type: sha256
description:
  eProsima FastCDR is a C++ library that provides two serialization mechanisms.
  One is the standard CDR serialization mechanism, while the other is a faster
  implementation that modifies the standard.


pkgId: 3498cee8cfb36df3d9fa051ded0402f57a224854dc371c05036a771086ed936a
name: fast_float
arch: src
version: 8.2.10
epoch: 0
release: 2.fc45
summary: Fast & exact implementation of C++ from_chars for number types
url: https://github.com/fastfloat/fast_float
rpm_license: (Apache-2.0 OR MIT OR BSL-1.0) AND Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fast_float-8.2.10-2.fc45.src.rpm
checksum_type: sha256
description:
  The fast_float library provides fast header-only implementations for the C++
  from_chars functions for float and double types as well as integer types. These
  functions convert ASCII strings representing decimal values (e.g., 1.3e10) into
  binary types. We provide exact rounding (including round to even). In our
  experience, these fast_float functions many times faster than comparable
  number-parsing functions from existing C++ standard libraries.


pkgId: f46a52314dee614640d2bee64ed74629ad7791de700a3ba46a4d4f05636ce1b0
name: fastapi-cli
arch: src
version: 0.0.32
epoch: 0
release: 1.fc45
summary: Run and manage FastAPI apps from the command line with FastAPI CLI
url: https://github.com/fastapi/fastapi-cli
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-28.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fastapi-cli-0.0.32-1.fc45.src.rpm
checksum_type: sha256
description:
  FastAPI CLI is a command line program fastapi that you can use to serve your
  FastAPI app, manage your FastAPI project, and more.


pkgId: 52a3bbeef45e6bfb91361bd5cf386fe15a7375a24126160ccf530407e41859d7
name: fastback
arch: src
version: 0.4
epoch: 0
release: 35.fc45
summary: File uploader, configureable file uploader
url: http://fedorahosted.org/fastback
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fastback-0.4-35.fc45.src.rpm
checksum_type: sha256
description:
  Fastback is a command line tool to upload files to a ticketing system, or
  other configurable URL (FTP,SCP,...).


pkgId: 3f084daa9680c6bf0f5060bb23ae6b61e0479c3d710c8020eb3aa8a3ac0309b1
name: fastd
arch: src
version: 23
epoch: 0
release: 5.fc45
summary: Fast and secure tunneling daemon
url: https://github.com/neocturne/fastd
rpm_license: BSD-2-Clause AND BSD-3-Clause AND LGPL-2.1-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fastd-23-5.fc45.src.rpm
checksum_type: sha256
description:
  fastd is a secure tunneling daemon with some unique features:

   - Very small binary (about 100KB on OpenWRT in the default configuration,
     including all dependencies besides libc)
   - Exchangable crypto methods
   - Transport over UDP for simple usage behind NAT
   - Can run in 1:1 and 1:n scenarios
   - There are no server and client roles defined by the protocol, this is just
     defined by the usage.
   - Only one instance of the daemon is needed on each host to create a full mesh
     If no full mesh is established, a routing protocol is necessary to enable
     hosts that are not connected directly to reach each other


pkgId: d8163daedb9a609d3388288fa8d2fb802df932da798b8587fb1fb711d476aece
name: fasterxml-oss-parent
arch: src
version: 75
epoch: 0
release: 2.fc45
summary: FasterXML parent pom
url: https://github.com/FasterXML/oss-parent
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fasterxml-oss-parent-75-2.fc45.src.rpm
checksum_type: sha256
description:
  FasterXML is the business behind the Woodstox streaming XML parser,
  Jackson streaming JSON parser, the Aalto non-blocking XML parser, and
  a growing family of utility libraries and extensions.

  FasterXML offers consulting services for adoption, performance tuning,
  and extension.

  This package contains the parent pom file for FasterXML.com projects.


pkgId: c09249e34f1185e7721f018dee2770be5f52d3ab9d398cc28deb3cf2770060ed
name: fastfetch
arch: src
version: 2.66.0
epoch: 0
release: 2.fc45
summary: Fast neofetch-like system information tool
url: https://github.com/fastfetch-cli/fastfetch
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fastfetch-2.66.0-2.fc45.src.rpm
checksum_type: sha256
description:
  fastfetch is a neofetch-like tool for fetching system information and
  displaying them in a pretty way. It is written in c to achieve much better
  performance, in return only Linux and Android are supported. It also uses
  mechanisms like multithreading and caching to finish as fast as possible.


pkgId: dad90a066afa3c59ee64c52325a62d59573fa52649aaf1ef2b5c80865f849c5e
name: fastlz
arch: src
version: 0.5.0
epoch: 0
release: 5.fc45
summary: Portable real-time compression library
url: http://fastlz.org/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fastlz-0.5.0-5.fc45.src.rpm
checksum_type: sha256
description:
  FastLZ is a lossless data compression library designed for real-time
  compression and decompression. It favors speed over compression ratio.
  Decompression requires no memory. Decompression algorithm is very simple,
  and thus extremely fast.


pkgId: eff8d6248a62b581d28eaed70ec688f80069fc95074e7d173a2c88c7e0cac876
name: fastrpc
arch: src
version: 1.0.6
epoch: 0
release: 3.fc45
summary: Qualcomm FastRPC and library
url: https://github.com/qualcomm/fastrpc
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-42.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fastrpc-1.0.6-3.fc45.src.rpm
checksum_type: sha256
description:
  FastRPC is Qualcomm's userspace library that facilitates efficient remote
  procedure calls between the CPU and DSP for high-performance computing.


pkgId: c64259ab8ce1ac2a94b544c0f55b78333d5da25b0081f93a0da9d56481dc6163
name: fastx_toolkit
arch: src
version: 0.0.14
epoch: 0
release: 40.fc45
summary: Tools to process short-reads FASTA/FASTQ files
url: http://hannonlab.cshl.edu/fastx_toolkit/index.html
rpm_license: AGPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fastx_toolkit-0.0.14-40.fc45.src.rpm
checksum_type: sha256
description:
  The FASTX-Toolkit is a collection of command line tools for
  Short-Reads FASTA/FASTQ files preprocessing.

  Next-Generation sequencing machines usually produce FASTA or FASTQ
  files, containing multiple short-reads sequences (possibly with
  quality information).

  The main processing of such FASTA/FASTQ files is mapping (aka
  aligning) the sequences to reference genomes or other databases using
  specialized programs. Example of such mapping programs are: Blat,
  SHRiMP, LastZ, MAQ and many many others.

  However, It is sometimes more productive to preprocess the FASTA/FASTQ
  files before mapping the sequences to the genome - manipulating the
  sequences to produce better mapping results.

  The FASTX-Toolkit tools perform some of these preprocessing tasks.


pkgId: ee4e7df7eb117ba385e54c946a7ea627df35b913cfdbbe100543b5597f3f8026
name: fatcat
arch: src
version: 1.1.1
epoch: 0
release: 8.fc45
summary: FAT filesystems explore, extract, repair, and forensic tool
url: https://github.com/Gregwar/fatcat
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fatcat-1.1.1-8.fc45.src.rpm
checksum_type: sha256
description:
  fatcat is a tool is designed to manipulate FAT filesystems, in order to
  explore, extract, repair, recover and forensic them. It currently supports
  FAT12, FAT16 and FAT32.


pkgId: 2a501dcf1a20cfa42d48380e1d19eb66ff4d6c1c946bd399c5ca3c17f58ac805
name: fatrace
arch: src
version: 0.19.1
epoch: 0
release: 4.fc45
summary: Reports file access events from all running processes
url: https://github.com/martinpitt/fatrace
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fatrace-0.19.1-4.fc45.src.rpm
checksum_type: sha256
description:
  fatrace reports file access events from all running processes.

  Its main purpose is to find processes which keep waking up the disk
  unnecessarily and thus prevent some power saving.


pkgId: 797938a82323225eece8719d42824bf27ec1f21454aa7521ae506f4a78a51664
name: fatsort
arch: src
version: 1.6.5.640
epoch: 0
release: 5.fc45
summary: FAT sorter for FAT16 and FAT32 filesystems
url: https://fatsort.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fatsort-1.6.5.640-5.fc45.src.rpm
checksum_type: sha256
description:
  Fatsort is a utility written in C to sort FAT16 and FAT32 filesystems. It is
  needed to sort files on cheap mp3 players that display files not sorted by
  their name but by the order they appear in the file allocation table (FAT).


pkgId: 0c48edcfb0da8e914fa9211eae145a42c858af4c9ce2a997e3f41de37f1f2d67
name: faust
arch: src
version: 2.85.9
epoch: 0
release: 2.fc45
summary: Compiled language for real-time audio signal processing
url: https://faust.grame.fr/
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/faust-2.85.9-2.fc45.src.rpm
checksum_type: sha256
description:
  Faust AUdio STreams is a functional programming language for real-time audio
  signal processing. Its programming model combines two approaches : functional
  programming and block diagram composition. You can think of FAUST as a
  structured block diagram language with a textual syntax.

  FAUST is intended for developers who need to develop efficient C/C++ audio
  plugins for existing systems or full standalone audio applications. Thanks to
  some specific compilation techniques and powerful optimizations, the C++ code
  generated by the Faust compiler is usually very fast. It can generally compete
  with (and sometimes outperform) hand-written C code.

  Programming with FAUST is somehow like working with electronic circuits and
  signals. A FAUST program is a list of definitions that defines a signal
  processor block-diagram : a piece of code that produces output signals
  according to its input signals (and maybe some user interface parameters)

rpm_license:
  GPL-2.0-or-later AND MIT AND GPL-3.0-or-later AND BSD-3-Clause AND LGPL-3.0-or-later AND LGPL-2.1-or-later AND Apache-2.0 AND AML AND BSL-1.0


pkgId: 9bfaa9b185991ae5d06bfcade3d791d7871724c170ee923343ff0dd995ea36f4
name: fawltydeps
arch: src
version: 0.20.0
epoch: 0
release: 9.fc45
summary: Find undeclared and unused 3rd-party dependencies in your Python project
url: https://tweag.github.io/FawltyDeps/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-17.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fawltydeps-0.20.0-9.fc45.src.rpm
checksum_type: sha256
description:
  FawltyDeps is a dependency checker for Python that finds undeclared
  and/or unused 3rd-party dependencies in your Python project. The name
  is inspired by the Monty Python-adjacent Fawlty Towers sitcom.


pkgId: 80d743293965c69900b9d1ee3e6e6d328618f0bf5d39ef4e0a70795edb472407
name: fbf-mukti-fonts
arch: src
version: 3.5.0
epoch: 0
release: 2.fc45
summary: Bangla open source Opentype font
url: https://github.com/mitradranirban/fonts-mukti
rpm_license: GPL-3.0-or-later WITH Font-exception-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fbf-mukti-fonts-3.5.0-2.fc45.src.rpm
checksum_type: sha256
description:
  This is a one of the earliest Open Source OpenType Bengali / Bangla font
   made for Mukta Bangla Font project. It was  made by using good quality glyphs
   of GPLed font bng2-n from Cyberscape Multimedia
  <https://web.archive.org/web/20021113130716/http://www.akruti.com/freedom/>.


pkgId: 43e7c3a1c70e49f9435574278fe5bb08de5f211a68a32717117a27af1ed55cab
name: fbg2
arch: src
version: 0.4
epoch: 0
release: 38.fc45
summary: A falling block stacking game
url: http://sourceforge.net/projects/fbg/
rpm_license: GPL-2.0-or-later AND LicenseRef-Callaway-CC-BY-SA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fbg2-0.4-38.fc45.src.rpm
checksum_type: sha256
description:
  Falling Block Game is a free, open source block stacking game. The object of
  the game is to move and rotate pieces in order to fill in complete rows. The
  more rows you clear at once, the more points you score!


pkgId: bdfce3a86953634532eaebf9b501ea50b4d68fa4962423b1493354c742afa08c
name: fbgemm
arch: src
version: 1.6.0
epoch: 0
release: 2.fc45
summary: Facebook General Matrix-Matrix Multiplication
url: https://github.com/pytorch/fbgemm
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fbgemm-1.6.0-2.fc45.src.rpm
checksum_type: sha256
description:
  FBGEMM (Facebook GEneral Matrix Multiplication) is a low-precision, high
  performance matrix-matrix multiplications and convolution library for
  server-side inference.

  The library provides efficient low-precision general matrix multiplication for
  small batch sizes and support for accuracy-loss minimizing techniques such as
  row-wise quantization and outlier-aware quantization. FBGEMM also exploits
  fusion opportunities in order to overcome the unique challenges of matrix
  multiplication at lower precision with bandwidth-bound operations.


pkgId: 059a9b6c6b58b415a8252198e8cf1d3e2f31bc0995b2270fa16859c45017b888
name: fbida
arch: src
version: 2.15
epoch: 0
release: 2.fc45
summary: FrameBuffer Imageviewer
url: https://www.kraxel.org/blog/linux/fbida/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fbida-2.15-2.fc45.src.rpm
checksum_type: sha256
description:
  fbi displays the specified file(s) on the linux console using the
  framebuffer device. PhotoCD, jpeg, ppm, gif, tiff, xwd, bmp and png
  are supported directly. For other formats fbi tries to use
  ImageMagick's convert.


pkgId: 74d1774127765bfd15f552b7c24e469471894e4e191966db09b81f15d95c8428
name: fbreader
arch: src
version: 0.99.4
epoch: 0
release: 21.fc45
summary: E-book reader
url: http://www.fbreader.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fbreader-0.99.4-21.fc45.src.rpm
checksum_type: sha256
description:
  FBReader is an e-book reader, with the following main features:

  * Supports several formats: fb2, HTML, CHM, plucker, Palmdoc, zTxt
    (Weasel), TCR (psion), RTF, OEB, OpenReader, mobipocket, plain text.
  * Direct reading from tar, zip, gzip and bzip2 archives. (Multiple
    books in one archive are supported.)
  * Automatic library building.
  * Automatic encoding detection is supported.
  * Automatically generated contents table.
  * Embedded images support.
  * Footnotes/hyperlinks support.
  * Position indicator.
  * Keeps the last open book and the last read positions for all opened
    books between runs.
  * List of last opened books.
  * Automatic hyphenations. Liang's algorithm is used. The same
    algorithm is used in TeX, and TeX hyphenation patterns are used in
    FBReader. Patterns for Czech, English, Esperanto, French, German and
    Russian are included in the current version.
  * Text search.
  * Full-screen mode.
  * Screen rotation by 90, 180 and 270 degrees.


pkgId: 78c69f3b2b74bb11202bfaefbdb6c0b17ef9eede7a1d66a978ec316600766caa
name: fbrnch
arch: src
version: 1.8.3
epoch: 0
release: 42.fc45
summary: Fedora packager tool to build package branches
url: https://hackage.haskell.org/package/fbrnch
rpm_license: GPL-2.0-or-later AND GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fbrnch-1.8.3-42.fc45.src.rpm
checksum_type: sha256
description:
  Fbrnch (fedora branch or "f-branch" for short) is a convenient packaging tool
  for Fedora Packagers, with integration for Bugzilla, Koji, and Bodhi.

  Features include:
  - merging and building a package across release branches
  - automated parallel builds of sets of packages in dependency order
  - creating, updating and listing one's package reviews
  - requesting repos for new approved packages and branch requests
  - import srpms from package reviews
  - progressive copr builds
  and many more commands.


pkgId: a828fd3e63aeeab6644cbc97825485bcfb30c26ac00ce3f6a679901f55d1e5b0
name: fbterm
arch: src
version: 1.7
epoch: 0
release: 35.fc45
summary: A frame-buffer terminal emulator
url: http://code.google.com/p/fbterm/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fbterm-1.7-35.fc45.src.rpm
checksum_type: sha256
description:
  FbTerm is a fast terminal emulator for Linux with frame-buffer device.
  Features include:
  - mostly as fast as terminal of Linux kernel while accelerated scrolling
    is enabled on frame-buffer device
  - select font with fontconfig and draw text with freetype2, same as
    Qt/Gtk+ based GUI apps
  - dynamically create/destroy up to 10 windows initially running default
    shell
  - record scroll back history for every window
  - auto-detect text encoding with current locale, support double width
    scripts like  Chinese, Japanese etc
  - switch between configurable additional text encodings with hot keys
    on the fly
  - copy/past selected text between windows with mouse when gpm server
    is running


pkgId: 712898bb2da325b34d20fdf9134af89d24cec7f81944e2e3e38b2024fac06a76
name: fbzx
arch: src
version: 4.8.0
epoch: 0
release: 15.fc45
summary: A ZX Spectrum emulator for FrameBuffer
url: https://www.rastersoft.com/programas/fbzx.html
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fbzx-4.8.0-15.fc45.src.rpm
checksum_type: sha256
description:
  FBZX is a Sinclair Spectrum emulator, designed to work at full screen using
  the FrameBuffer or under X-Windows.


pkgId: 710dec5b7b887f4ba6308c59e0fa6cbd75e813c593ddf8c0c4057ca18b0be935
name: fcft
arch: src
version: 3.3.3
epoch: 0
release: 3.fc45
summary: Simple library for font loading and glyph rasterization
url: https://codeberg.org/dnkl/fcft
rpm_license: MIT AND Unicode-3.0 AND Zlib
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcft-3.3.3-3.fc45.src.rpm
checksum_type: sha256
description:
  fcft is a small font loading and glyph rasterization library built
  on top of FontConfig, FreeType2 and pixman.
  It can load and cache fonts from a fontconfig-formatted name string,
  e.g. Monospace:size=12, optionally with user configured fallback fonts.


pkgId: 3b1a30096ff9c926ae46c9cbe1de44c7f3f5e3a19669a082fcdf9434021cb656
name: fcgi
arch: src
version: 2.4.7
epoch: 0
release: 3.fc45
summary: FastCGI development kit
url: https://github.com/FastCGI-Archives/fcgi2
rpm_license: OML
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcgi-2.4.7-3.fc45.src.rpm
checksum_type: sha256
description:
  FastCGI is a language independent, scalable, open extension to CGI that
  provides high performance without the limitations of server specific APIs.


pkgId: bd8e61af7eb235d2db79c8abcf9c940bd7607e1e25ed4543b0bbc6d98ad23ec5
name: fcgiwrap
arch: src
version: 1.1.0
epoch: 0
release: 28.20181108git99c942c.fc45
summary: Simple FastCGI wrapper for CGI scripts
url: https://github.com/gnosek/fcgiwrap
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcgiwrap-1.1.0-28.20181108git99c942c.fc45.src.rpm
checksum_type: sha256
description:
  This package provides a simple FastCGI wrapper for CGI scripts with/
  following features:
   - very lightweight (84KB of private memory per instance)
   - fixes broken CR/LF in headers
   - handles environment in a sane way (CGI scripts get HTTP-related environment
     vars from FastCGI parameters and inherit all the others from
     environment of fcgiwrap )
   - no configuration, so you can run several sites off the same
     fcgiwrap pool
   - passes CGI std error output to std error stream of cgiwrap or FastCGI
   - support systemd socket activation, launcher program like spawn-fcgi
     is no longer required on systemd-enabled distributions


pkgId: cc6b8910483f68b244fa18a3199f3278064a8b83d0a5e7cab0e8d4b671a9b53c
name: fcitx
arch: src
version: 4.2.9.9
epoch: 0
release: 14.fc45
summary: An input method framework
url: https://fcitx-im.org/wiki/Fcitx
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx-4.2.9.9-14.fc45.src.rpm
checksum_type: sha256
description:
  Fcitx is an input method framework with extension support. Currently it
  supports Linux and Unix systems like FreeBSD.

  Fcitx tries to provide a native feeling under all desktop as well as a light
  weight core. You can easily customize it to fit your requirements.


pkgId: 694d63fc980664efa94c42991e882ac143b8a4056ff23955465eb934900ecc51
name: fcitx-chewing
arch: src
version: 0.2.3
epoch: 0
release: 26.fc45
summary: Chewing Wrapper for Fcitx
url: https://fcitx-im.org/wiki/Chewing
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx-chewing-0.2.3-26.fc45.src.rpm
checksum_type: sha256
description:
  Fcitx-chewing is a Chewing Wrapper for Fcitx.

  Chewing is a set of free intelligent Chinese
  Phonetic IME.


pkgId: 1353972e0fa125c06e3297d3d59599fc35d484c9688ecf36447d95014d74479a
name: fcitx-cloudpinyin
arch: src
version: 0.3.7
epoch: 0
release: 20.fc45
summary: Cloudpinyin module for fcitx
url: https://fcitx-im.org/wiki/Cloudpinyin
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx-cloudpinyin-0.3.7-20.fc45.src.rpm
checksum_type: sha256
description:
  Cloudpinyin is Fcitx addon that will add one candidate word to your pinyin
  list. It current support four provider, Sogou, QQ, Baidu, Google.


pkgId: 3c34b044b8ad41d048cfdb16fdf964debc4f0f9eee7f96226e0e4549d5bcc2c3
name: fcitx-libpinyin
arch: src
version: 0.5.4
epoch: 0
release: 15.fc45
summary: Libpinyin Wrapper for Fcitx
url: https://fcitx-im.org/wiki/Libpinyin
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx-libpinyin-0.5.4-15.fc45.src.rpm
checksum_type: sha256
description:
  Fcitx-libpinyin is a libpinyin Wrapper for Fcitx.

  Libpinyin is a Frontend of the Intelligent Pinyin IME Backend.


pkgId: b74df387339f0ca6f553b998cabfe6ad8c1fc2aa6bdf15a017e17e244e29538f
name: fcitx-m17n
arch: src
version: 0.2.4
epoch: 0
release: 25.fc45
summary: M17n Engine for Fcitx
url: https://fcitx-im.org/wiki/M17N
rpm_license: LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx-m17n-0.2.4-25.fc45.src.rpm
checksum_type: sha256
description:
  Fcitx-m17n is a M17n engine wrapper for Fcitx.
  It allows input of many languages using the
  input table maps from m17n-db.


pkgId: c2de413583bb0775bffd5d33207b7ebda61d74c57480b6302b0f7336ce66f8a0
name: fcitx-skk
arch: src
version: 0.1.4
epoch: 0
release: 16.fc45
summary: Japanese SKK (Simple Kana Kanji) Engine for Fcitx
url: https://fcitx-im.org/wiki/Fcitx
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx-skk-0.1.4-16.fc45.src.rpm
checksum_type: sha256
description:
  Fcitx-skk is an SKK (Simple Kana Kanji) engine for Fcitx.  It provides
  Japanese input method using libskk.


pkgId: 7d908f18a67e5c15fae455cf7f675f470c27206c58fbc364d1e74a5efdf5f4f7
name: fcitx-sunpinyin
arch: src
version: 0.4.2
epoch: 0
release: 26.fc45
summary: Sunpinyin Wrapper for Fcitx
url: http://fcitx-im.org/wiki/Fcitx
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx-sunpinyin-0.4.2-26.fc45.src.rpm
checksum_type: sha256
description:
  Fcitx-sunpinyin is a Sunpinyin Wrapper for Fcitx.

  SunPinyin is an SLM (Statistical Language Model) based input method
  engine. To model the Chinese language, it use a backoff bigram and
  trigram language model.


pkgId: 1e11860b7b9366ceacdabd73b7cf4673afe816238e6407fa7ce6d9ee6edd4855
name: fcitx-table-extra
arch: src
version: 0.3.8
epoch: 0
release: 25.fc45
summary: Extra tables for Fcitx
url: http://fcitx-im.org/wiki/Fcitx
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx-table-extra-0.3.8-25.fc45.src.rpm
checksum_type: sha256
description:
  Fcitx-table-extra provides extra table for Fcitx, including Boshiamy, Zhengma,
  and Cangjie 3/5.

  Boshiamy table and its icon are released under their own license.


pkgId: fa372d3b424637faa490f4844380718e7d6fa0fdafe5151442234e881ebbfcd2
name: fcitx5-chewing
arch: src
version: 5.1.12
epoch: 0
release: 2.fc45
summary: Chewing Wrapper for Fcitx
url: https://github.com/fcitx/fcitx5-chewing
rpm_license: LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx5-chewing-5.1.12-2.fc45.src.rpm
checksum_type: sha256
description:
  fcitx5-chewing is a Chewing Wrapper for Fcitx.

  Chewing is a set of free intelligent Chinese
  Phonetic IME.


pkgId: 95a329ef6291ab2cd571c2b03add58b83ecdf5646cbf876e2762be9b92fe175f
name: fcitx5-chinese-addons
arch: src
version: 5.1.13
epoch: 0
release: 2.fc45
summary: Chinese related addon for fcitx5
url: https://github.com/fcitx/fcitx5-chinese-addons
rpm_license: LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx5-chinese-addons-5.1.13-2.fc45.src.rpm
checksum_type: sha256
description:
  This provides pinyin and table input method
  support for fcitx5. Released under LGPL-2.1+.

  im/pinyin/emoji.txt is derived from Unicode
  CLDR with modification.


pkgId: f3fd999ca577447834b0843a014731f0a72f41cbdaaa205975a58d3af80010a8
name: fcitx5-m17n
arch: src
version: 5.1.6
epoch: 0
release: 2.fc45
summary: m17n Wrapper for Fcitx5
url: https://github.com/fcitx/fcitx5-m17n
rpm_license: LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx5-m17n-5.1.6-2.fc45.src.rpm
checksum_type: sha256
description:
  M17N is a large collection of input method, which can cover
  quite a lot languages in the world, including Latin, Arabic,
  etc.


pkgId: 571a4a2476ce3662dedba457183011830fda5376dab7788f8dbb3277f16d9a14
name: fcitx5-mozc
arch: src
version: 2.30.5618.102^20250124gitc0ed34e
epoch: 0
release: 8.fc45
summary: A wrapper of mozc for fcitx5
description: A wrapper of mozc for fcitx5.
url: https://github.com/fcitx/mozc
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx5-mozc-2.30.5618.102^20250124gitc0ed34e-8.fc45.src.rpm
checksum_type: sha256
rpm_license:
  BSD-3-Clause AND BSD-2-Clause AND LicenseRef-Fedora-Public-Domain AND NAIST-2003 AND LGPL-2.0-or-later  AND Apache-2.0


pkgId: a7df7498c075246e9bbc605f11bea82a71f8b2522b14270bb0e94d1d7f41878b
name: fcitx5-skk
arch: src
version: 5.1.9
epoch: 0
release: 3.fc45
summary: Japanese SKK (Simple Kana Kanji) Engine for Fcitx5
url: https://github.com/fcitx/fcitx5-skk
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx5-skk-5.1.9-3.fc45.src.rpm
checksum_type: sha256
description:
  Fcitx5-skk is an SKK (Simple Kana Kanji) engine for Fcitx.  It provides
  Japanese input method using libskk.


pkgId: 8586a822775e034c61a2e0444aca3ecf997e6a782e852c7a0782b2b1de2dd05c
name: fcitx5-table-extra
arch: src
version: 5.1.12
epoch: 0
release: 2.fc45
summary: Extra tables for Fcitx5
url: https://github.com/fcitx/fcitx5-table-extra
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-24.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcitx5-table-extra-5.1.12-2.fc45.src.rpm
checksum_type: sha256
description:
  Extra tables for Fcitx5.
  fcitx5-table-extra provides extra table for
  Fcitx5, including Boshiamy, Zhengma, Cangjie,
  and Quick.


pkgId: 7ede1c857fc050cfd90614024ad3377844062be38727cbd24fe733eb02d3a012
name: fcoe-utils
arch: src
version: 1.0.34
epoch: 0
release: 16.git5e78a2d.fc45
summary: Fibre Channel over Ethernet utilities
url: http://www.open-fcoe.org
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fcoe-utils-1.0.34-16.git5e78a2d.fc45.src.rpm
checksum_type: sha256
description:
  Fibre Channel over Ethernet utilities
  fcoeadm - command line tool for configuring FCoE interfaces
  fcoemon - service to configure DCB Ethernet QOS filters, works with lldpad


pkgId: 76f80815e412482937a2b8849f947b37045e59b58fec5a35a53576babfbac5c7
name: fdk-aac-free
arch: src
version: 2.0.3
epoch: 0
release: 3.fc45
summary: Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android
url: https://cgit.freedesktop.org/~wtay/fdk-aac/log/?h=fedora
rpm_license: FDK-AAC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fdk-aac-free-2.0.3-3.fc45.src.rpm
checksum_type: sha256
description:
  The Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library
  for Android is software that implements part of the MPEG Advanced Audio Coding
  ("AAC") encoding and decoding scheme for digital audio.


pkgId: 39cbfe267eaee529ec34b1fffe1568e9d622ccc178358be6d04a014547711bb0
name: fdkaac
arch: src
version: 1.0.8
epoch: 0
release: 1.fc45
summary: Command line frontend for libfdk-aac encoder
url: https://github.com/nu774/fdkaac
rpm_license: Zlib AND MIT AND TU-Berlin-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fdkaac-1.0.8-1.fc45.src.rpm
checksum_type: sha256
description:
  fdkaac reads linear PCM audio in either WAV, raw PCM, or CAF format,
  and encodes it into either M4A / AAC file.

  If the input file is "-", data is read from stdin. Likewise, if the
  output file is "-", data is written to stdout if one of streamable AAC
  transport formats are selected by -f.

  When CAF input and M4A output is used, tags in CAF file are copied into
  the resulting M4A.


pkgId: 8428e036a8fa001f2780599e69fd62acac1e45b59b8cbc47023ffb2c990290c7
name: featherpad
arch: src
version: 1.6.2
epoch: 0
release: 4.fc45
summary: Lightweight Qt Plain-Text Editor
url: https://github.com/tsujan/FeatherPad
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/featherpad-1.6.2-4.fc45.src.rpm
checksum_type: sha256
description:
  FeatherPad is a lightweight Qt plain-text editor for Linux. It is independent
  of any desktop environment and has:

  * Drag-and-drop support, including tab detachment and attachment;
  * X11 virtual desktop awareness (using tabs on current desktop but opening a
    new window on another);
  * An optionally permanent search-bar with a different search entry
    for each tab;
  * Instant highlighting of found matches when searching;
  * A docked window for text replacement;
  * Support for showing line numbers and jumping to a specific line;
  * Automatic detection of text encoding as far as possible and optional saving
    with encoding;
  * Syntax highlighting for common programming languages;
  * Printing;
  * Text zooming;
  * Appropriate but non-interrupting prompts;


pkgId: c1c1317ace616a51b1e2af45a2708e72652437da9e0c41602ec16683a5c89e4d
name: fedfind
arch: src
version: 6.1.4
epoch: 0
release: 3.fc45
summary: Fedora compose and image finder
url: https://forge.fedoraproject.org/quality/fedfind
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedfind-6.1.4-3.fc45.src.rpm
checksum_type: sha256
description:
  Fedora Finder finds Fedora. For now, that means it finds Fedora images
  - for stable releases, milestone pre-releases, candidate composes, and
  nightly composes. The fedfind package provides a simple CLI for showing
  image URLs.


pkgId: d8ea274dc4ac9de01f9abefaf24ece55a351c6e9525f89705e7397e73895fffa
name: fedora-active-user
arch: src
version: 26.06.22
epoch: 0
release: 2.fc45
summary: Check whether a given Fedora developer is still active
url: https://github.com/hrw/fedora-active-user
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-44.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-active-user-26.06.22-2.fc45.src.rpm
checksum_type: sha256
description:
  This program performs a number of checks to have an educated guess as to
  whether someone can be consider as 'active' or not within the Fedora project.


pkgId: 2117c5f102b163f43b6524c036fdb8e984dbb4fd6b3eedf57a38056e63db3fa7
name: fedora-distro-aliases
arch: src
version: 1.8
epoch: 0
release: 4.fc45
summary: Aliases for active Fedora releases
url: https://github.com/rpm-software-management/fedora-distro-aliases
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-15.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-distro-aliases-1.8-4.fc45.src.rpm
checksum_type: sha256
description:
  Some projects such as Tito, Packit,
  Fedora Review Service, etc operate over currently active Fedora releases.
  They can use this package to find their version numbers instead of manually
  defining a list.

  This package queries Bodhi to find the active releases and therefore requires an
  internet connection.


pkgId: 9966f04fcf61aafc59ea18964d0ef5961a8ea2b5a46dd36527cf42e86d2567e5
name: fedora-easy-karma
arch: src
version: 1.0
epoch: 0
release: 1.fc45
summary: Fedora update feedback made easy
url: https://forge.fedoraproject.org/quality/fedora-easy-karma
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-easy-karma-1.0-1.fc45.src.rpm
checksum_type: sha256
description:
  Fedora Easy Karma is a command-line tool to submit feedback
  for Fedora updates installed from the updates-testing repository.

  The application finds testing packages installed on the local system,
  fetches corresponding updates from Bodhi, displays their information,
  and allows users to submit karma and comments.


pkgId: 873ce7f9ab482c21a4de9e39143bebe04372e306e86898e3db75072fb73dddc0
name: fedora-flathub-remote
arch: src
version: 1
epoch: 0
release: 20.fc45
summary: Third party remote pointing to a filtered version of flathub.org
url: https://forge.fedoraproject.org/fesco/fedora-flathub-filter
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-13.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-flathub-remote-1-20.fc45.src.rpm
checksum_type: sha256
description:
  This package adds configuration to add a remote pointing to flathub.org when
  third-party repositories are enabled on a Fedora Linux system. This remote is
  filtered to include only specific Fedora-approved packages. (If the user
  installs the Flathub remote manually, the filter is removed, and the flathub
  remote is no longer managed as a third-party repository.)


pkgId: 7ea4cd542d3f4a627984776822f793840319c4c1c5feee7571e401cf4beb9d01
name: fedora-gnat-project-common
arch: src
version: 3.22
epoch: 0
release: 5.fc45
summary: Files shared by Ada libraries
url: https://src.fedoraproject.org/rpms/fedora-gnat-project-common
rpm_license: FSFAP
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-44.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-gnat-project-common-3.22-5.fc45.src.rpm
checksum_type: sha256
description:
  The fedora-gnat-project-common package contains files that are used by the GNAT
  project files of multiple Ada libraries, and also GNAT-specific RPM macros.


pkgId: 93de1fc46a65d9aab4aa1b15029cd3e63fbb0b869034643bc9718d3bfc0b6c6d
name: fedora-jam-backgrounds
arch: src
version: 2.0.0
epoch: 0
release: 16.fc45
summary: Fedora Jam desktop backgrounds
url: https://fedoraproject.org/wiki/Fedora_jam
rpm_license: CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-jam-backgrounds-2.0.0-16.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora Jam theme.
  Pulls in both Gnome and KDE themes.


pkgId: 62eae93244a69ce84073a7774b5215841e5f170248c4c63a99e903a72b60d0d0
name: fedora-license-data
arch: src
version: 1.75
epoch: 0
release: 2.fc45
summary: Fedora Linux license data
url: https://gitlab.com/fedora/legal/fedora-license-data
rpm_license: CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-44.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-license-data-1.75-2.fc45.src.rpm
checksum_type: sha256
description:
  This project contains information about licenses used in the Fedora
  Linux project.  Licenses are categorized by their approval or
  non-approval and may include additional notes.  The data files provide
  mappings between the SPDX license expressions and the older Fedora
  license legacy-abbreviations.

  The project also intends to publish the combined license information
  in a number of data file formats and provide a package in Fedora for
  other projects to reference, such as package building tools and
  package checking tools.

  The Fedora Legal team is responsible for this project.


pkgId: 66d29eda5ee86984ea66e64ab78431c532693f7dbaec75cabe0588d95cc8a7e8
name: fedora-logos
arch: src
version: 42.0.1
epoch: 0
release: 6.fc45
summary: Fedora-related icons and pictures
url: https://pagure.io/fedora-logos
rpm_license: LicenseRef-Fedora-Logos
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-logos-42.0.1-6.fc45.src.rpm
checksum_type: sha256
description:
  The fedora-logos package contains image files which incorporate the
  Fedora trademarks (the "Marks"). The Marks are trademarks or registered
  trademarks of Red Hat, Inc. in the United States and other countries and
  are used by permission.

  This package and its content may not be distributed with anything but
  unmodified packages from Fedora Project. It can be used in a Fedora Spin,
  but not in a Fedora Remix. If necessary, this package can be replaced by
  the more liberally licensed generic-logos package.

  See the included COPYING file for full information on copying and
  redistribution of this package and its contents.


pkgId: 5aaf0cc8433fb62275fcaa1e227fe533f9c69e4ce85693b2b2bfe7c05aa9c943
name: fedora-obsolete-packages
arch: src
version: 45
epoch: 0
release: 8
summary: A package to obsolete retired packages
url: https://docs.fedoraproject.org/en-US/packaging-guidelines/#renaming-or-replacing-existing-packages
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-obsolete-packages-45-8.src.rpm
checksum_type: sha256
description:
  This package exists only to obsolete other packages which need to be removed
  from the distribution. Packages are listed here when they become uninstallable
  and must be removed to allow upgrades to proceed cleanly, or when there is some
  other strong reason to uninstall the package from user systems. The package
  being retired (and potentially becoming unavailable in future releases of
  Fedora) is not a reason to include it here, as long as it doesn't cause upgrade
  problems.

  Note that this package is not installable, but obsoletes other packages by being
  available in the repository.

  Currently obsoleted packages:

    wireless-tools < 1:29-28
    wireless-tools-devel < 1:29-28
    (See https://src.fedoraproject.org/rpms/wireless-tools/c/88b85a0fb8977aeeacdc422e47c38abd3ff31f2a?branch=rawhide)

    rstudio-common < 2024.04.2+764-4
    rstudio-desktop < 2024.04.2+764-4
    rstudio-server < 2024.04.2+764-4
    (See https://src.fedoraproject.org/rpms/rstudio/c/67a9644580937f93325961293246e49d79c648c2?branch=rawhide)

    rubygem-byebug < 11.1.3-6
    rubygem-pry-byebug < 3.6.0-14
    (See https://src.fedoraproject.org/rpms/rubygem-byebug/c/245925a225da471c45cc0eae8d499046a6db7800?branch=rawhide)

    rubygem-shoulda < 3.6.0-15
    (See https://src.fedoraproject.org/rpms/rubygem-shoulda/c/ad584cb6c828abf0cfba90769186c9b2613fd946?branch=rawhide)

    perl-Test-Apocalypse < 1.006-30
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2260493)

    celestia < 1.7.0~320231229.git6899839-6
    celestia-common < 1.7.0~320231229.git6899839-6
    celestia-doc < 1.7.0~320231229.git6899839-6
    celestia-gtk < 1.7.0~320231229.git6899839-6
    celestia-qt < 1.7.0~320231229.git6899839-6
    celestia-data < 1.7.0~320231125.gitdb53ae3-4
    (See https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/LAE5JLO3KYVQVSF776H4QLY6DTAUQHWR/)

    workrave < 1.11.0~beta.13-3
    workrave-cinnamon < 1.11.0~beta.13-3
    workrave-gnome < 1.11.0~beta.13-3
    workrave-gnome-flashback < 1.11.0~beta.13-3
    workrave-mate < 1.11.0~beta.13-3
    workrave-xfce < 1.11.0~beta.13-3
    (See https://src.fedoraproject.org/rpms/workrave/c/630c7e05debe7e25e0ef3e00b060ca7da021db25?branch=rawhide)

    libomxil-bellagio < 0.9.3-34
    libomxil-bellagio-devel < 0.9.3-34
    libomxil-bellagio-test < 0.9.3-34
    (See https://src.fedoraproject.org/rpms/libomxil-bellagio/c/3684f6e28)

    guile < 2.0.14-37
    guile-devel < 2.0.14-37
    (See https://src.fedoraproject.org/rpms/guile/c/b148178cb)

    gimp-save-for-web < 0.29.3-20
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2307970)

    gimp-layer-via-copy-cut < 1.6-27
    gimp-separate+ < 0.5.8-35
    gimp-wavelet-decompose < 0-17
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2307966)

    aiodnsbrute < 0.3.3-7
    apostrophe < 1:2.6.3-17
    ccnet < 6.1.8-19
    ccnet-devel < 6.1.8-19
    container-workflow-tool < 1.2.0-10
    copr-distgit-client < 0.73-2
    csound-devel < 6.16.2-13
    csound-java < 6.16.2-13
    deepin-dock-onboard-plugin < 5.5.81-2
    dlrn < 0.14.0-16
    esphomeflasher < 1.4.0-9
    fedmod < 0.6.6-6
    fedmsg < 1.1.7-7
    fontdump < 1.3.0-30
    glue < 0.13-14
    gofer < 3.0.0-0.22
    gofer-tools < 3.0.0-0.22
    heat-cfntools < 1.4.2-25
    hgview < 1.14.0-15
    hgview-common < 1.14.0-15
    hgview-curses < 1.14.0-15
    kf5-kapidox < 5.111.0-2
    kismon < 1.0.2-12
    komikku < 1.36.0-2
    mailman3-fedmsg-plugin < 0.5-28
    mkosi14 < 14-5
    module-build-service < 3.9.2-10
    onboard < 1.4.1-35
    onboard-data < 1.4.1-35
    oraculum < 0.2.4-13
    oval-graph < 1.3.3-10
    pipenv < 2023.2.18-5
    prelude-correlator < 5.2.0-14
    python-ZConfig-doc < 4.1-2
    python-limits-doc < 3.9.0-3
    python3-BTrees < 5.2-2
    python3-EvoPreprocess < 0.5.0-7
    python3-GridDataFormats < 1.0.1-8
    python3-SALib < 1.4.7-5
    python3-ZConfig < 4.1-2
    python3-ZConfig+test < 4.1-2
    python3-ZEO < 6.0.0-4
    python3-ZEO+msgpack < 6.0.0-4
    python3-ZEO+uvloop < 6.0.0-4
    python3-ZODB < 6.0-2
    python3-ZODB3 < 3.11.0-29
    python3-abrt-container-addon < 2.17.6-2
    python3-adb < 1.3.0-16
    python3-aiomqtt < 0.1.3-21
    python3-amico < 1.0.1-30
    python3-anymarkup < 0.8.1-16
    python3-anymarkup-core < 0.8.1-13
    python3-apply-defaults < 0.1.4-15
    python3-astropy-helpers < 4.0.1-13
    python3-astunparse < 1.6.3-15
    python3-atomic-reactor-koji < 3.14.0-8
    python3-atomic-reactor-metadata < 3.14.0-8
    python3-atomic-reactor-rebuilds < 3.14.0-8
    python3-autoprop < 4.1.0-11
    python3-azure-eventhub < 5.11.3-3
    python3-azure-mgmt-automanage < 1.0.0-6
    python3-azure-mgmt-azurestackhci < 6.0.0-9
    python3-azure-mgmt-dashboard < 1.0.0-6
    python3-azure-mgmt-deploymentmanager < 1:0.2.0-13
    python3-azure-mgmt-fluidrelay < 1.0.0-6
    python3-azure-mgmt-hybridcompute < 7.0.0-9
    python3-azure-mgmt-reservations < 1:2.0.0-10
    python3-boututils+mayavi < 0.1.10-5
    python3-catch22 < 0.4.0-14
    python3-cle < 9.2.39-4
    python3-colorcet < 3.0.1^20221003git809e291-13
    python3-colorcet+examples < 3.0.1^20221003git809e291-10
    python3-compressed-rtf < 1.0.6-3
    python3-csound < 6.16.2-13
    python3-cython0.29 < 0.29.35-4
    python3-datadog < 0.44.0-10
    python3-devicely < 1.1.1-11
    python3-devtools < 0.12.2-2
    python3-django-auth-ldap < 4.1.0-9
    python3-django-pyscss < 2.0.2-35
    python3-djvulibre < 0.8.7-5
    python3-dlrn < 0.14.0-16
    python3-dns-lexicon+ddns < 3.13.0-2
    python3-dns-lexicon+duckdns < 3.13.0-2
    python3-dukpy < 0.3-25
    python3-elpy < 1.34.0-11
    python3-esbonio+test < 0.16.4-7
    python3-eventlet < 0.35.1-2
    python3-f5-icontrol-rest < 1.3.16-2
    python3-f5-sdk < 3.0.21-23
    python3-fdb < 2.0.1-11
    python3-fedmsg < 1.1.7-7
    python3-fedmsg-meta-fedora-infrastructure < 0.31.0-13
    python3-flake8-docstrings < 1.6.0-9
    python3-flask-basicauth < 0.2.0-7
    python3-flask-htmlmin < 2.2.1-5
    python3-fontdump < 1.3.0-30
    python3-future < 0.18.3-11
    python3-gensim < 0.10.0-36
    python3-gensim-addons < 0.10.0-36
    python3-gensim-test < 0.10.0-36
    python3-gnocchiclient-tests < 7.0.7-11
    python3-gofer < 3.0.0-0.22
    python3-gofer-amqp < 3.0.0-0.22
    python3-gofer-proton < 3.0.0-0.22
    python3-google-cloud-access-approval < 1.11.3-2
    python3-google-cloud-access-context-manager < 0.1.16-4
    python3-google-cloud-api-gateway < 1.7.3-2
    python3-google-cloud-apigee-connect < 1.7.1-4
    python3-google-cloud-appengine-admin < 1.9.4-2
    python3-google-cloud-asset < 3.22.0-2
    python3-google-cloud-automl < 2.11.4-2
    python3-google-cloud-bigquery < 3.14.0-4
    python3-google-cloud-bigquery+bqstorage < 3.14.0-4
    python3-google-cloud-bigquery+geopandas < 3.14.0-4
    python3-google-cloud-bigquery+ipython < 3.14.0-4
    python3-google-cloud-bigquery+tqdm < 3.14.0-4
    python3-google-cloud-bigquery-connection < 1.13.2-2
    python3-google-cloud-bigquery-datatransfer < 3.12.1-2
    python3-google-cloud-bigquery-reservation < 1.11.3-2
    python3-google-cloud-bigquery-storage < 2.22.0-4
    python3-google-cloud-bigquery-storage+fastavro < 2.22.0-4
    python3-google-cloud-bigquery-storage+pandas < 2.22.0-4
    python3-google-cloud-bigquery-storage+pyarrow < 2.22.0-4
    python3-google-cloud-bigtable < 2.21.0-2
    python3-google-cloud-billing < 1.11.4-3
    python3-google-cloud-billing-budgets < 1.12.1-3
    python3-google-cloud-build < 3.21.0-2
    python3-google-cloud-common < 1.2.0-4
    python3-google-cloud-container < 2.33.0-2
    python3-google-cloud-containeranalysis < 2.12.4-2
    python3-google-cloud-data-fusion < 1.8.3-2
    python3-google-cloud-datacatalog < 3.11.1-4
    python3-google-cloud-dataproc < 5.7.0-2
    python3-google-cloud-dataproc-metastore < 1.13.0-2
    python3-google-cloud-debugger-client < 1.7.0-3
    python3-google-cloud-deploy < 1.14.0-2
    python3-google-cloud-dlp < 3.13.0-3
    python3-google-cloud-dms < 1.7.2-3
    python3-google-cloud-domains < 1.4.1-4
    python3-google-cloud-filestore < 1.5.0-4
    python3-google-cloud-firestore < 2.13.1-2
    python3-google-cloud-functions < 1.13.3-3
    python3-google-cloud-iam < 2.12.2-2
    python3-google-cloud-kms < 2.19.2-2
    python3-google-cloud-monitoring < 2.19.1-2
    python3-google-cloud-org-policy < 1.8.3-3
    python3-google-cloud-os-config < 1.15.3-2
    python3-google-cloud-private-ca < 1.8.2-3
    python3-google-cloud-pubsub < 2.14.1-5
    python3-google-cloud-pubsub+libcst < 2.14.1-5
    python3-google-cloud-redis < 2.13.2-3
    python3-google-cloud-shell < 1.6.1-4
    python3-google-cloud-source-context < 1.4.3-3
    python3-google-cloud-spanner < 3.40.1-2
    python3-grabbit < 0.2.6-29
    python3-grafeas < 1.8.1-4
    python3-guizero < 1.3.0-7
    python3-gunicorn+eventlet < 21.2.0-5
    python3-gunicorn+gevent < 21.2.0-5
    python3-gunicorn+setproctitle < 21.2.0-5
    python3-hdmf+zarr < 3.14.3-2
    python3-htmlmin < 0.1.12-23
    python3-ipdb < 0.13.13-7
    python3-j1m.sphinxautozconfig < 0.1.0-23
    python3-jose < 3.3.0-30
    python3-jose+cryptography < 3.3.0-30
    python3-jsonschema-spec < 0.2.4-2
    python3-jupyter-collaboration < 1.0.0-4
    python3-jupyter-server-fileid < 0.9.0-3
    python3-jupyter-ydoc < 1.0.2-4
    python3-kaitaistruct < 0.10-6
    python3-limits < 3.9.0-3
    python3-limits+etcd < 3.9.0-3
    python3-limits+memcached < 3.9.0-3
    python3-limits+mongodb < 3.9.0-3
    python3-limits+redis < 3.9.0-3
    python3-limits+rediscluster < 3.9.0-3
    python3-matplotlib-venn < 0.11.9-4
    python3-maya < 0.6.1-11
    python3-metaextract < 1.0.9-5
    python3-mglob < 0.4-43
    python3-mysql-debug < 1.4.6-15
    python3-openapi-spec-validator+requests < 0.5.7-5
    python3-openipmi < 2.0.32-11
    python3-openopt < 0.5629-14
    python3-opentelemetry-instrumentation-grpc < 1:0.39~b0-27
    python3-opentelemetry-instrumentation-grpc+instruments < 1:0.39~b0-27
    python3-opentype-sanitizer < 9.1.0-12
    python3-orderedset < 2.0.3-12
    python3-oslo-db < 14.1.0-4
    python3-oslo-db+mysql < 14.1.0-4
    python3-oslo-db-tests < 14.1.0-4
    python3-oslo-service < 3.1.1-11
    python3-oslo-service-tests < 3.1.1-11
    python3-oslo-sphinx < 4.18.0-20
    python3-param < 2.0.2-6
    python3-pep517 < 0.13.0-6
    python3-persistent < 5.2-2
    python3-persistent-devel < 5.2-2
    python3-persistent-doc < 5.2-2
    python3-pplpy < 0.8.10-2
    python3-pplpy-devel < 0.8.10-2
    python3-prelude < 5.2.0-27
    python3-prelude-correlator < 5.2.0-14
    python3-preludedb < 5.2.0-14
    python3-preprocess < 2.0.0-12
    python3-primecountpy < 0.1.0-14
    python3-py-gql < 0.6.1-15
    python3-pyct < 0.5.0-9
    python3-pyct+build < 0.5.0-9
    python3-pyct+cmd < 0.5.0-9
    python3-pyfastnoisesimd < 0.4.2-13
    python3-pyhirte < 0.4.0-4
    python3-pyliblo < 0.10.0-31
    python3-pymoc < 0.5.0-26
    python3-pyswarms < 1.3.0-23
    python3-pytest-bdd5 < 5.0.0-6
    python3-pytest-cython < 0.2.2-2
    python3-pytest-grpc < 0.8.0^20210806git3f21554-15
    python3-pyvex < 9.2.39-4
    python3-pyvhacd < 0.0.2-2
    python3-r128gain < 1.0.7-6
    python3-ratelimiter < 1.2.0-13
    python3-rdflib-jsonld < 0.6.0-10
    python3-red-black-tree-mod < 1.21-2
    python3-remctl < 3.18-9
    python3-ruffus < 2.8.4-17
    python3-scss < 1.4.0-4
    python3-setuptools_scm_git_archive < 1.4-5
    python3-signature-dispatch < 1.0.1-8
    python3-smartcols < 0.3.0-21
    python3-snipeit < 1.2-11
    python3-social-auth-core+openidconnect < 4.3.0-9
    python3-sphinxbase < 1:5-0.19
    python3-sphinxcontrib-applehelp < 1.0.2-15
    python3-sphinxcontrib-jsmath < 1.0.1-23
    python3-sphinxcontrib-openapi < 0.7.0-12
    python3-sphinxcontrib-zopeext < 0.4.3-4
    python3-sphinxext-rediraffe < 0.2.7-9
    python3-sqlalchemy+aioodbc < 2.0.35-2
    python3-sqlalchemy+mssql_pyodbc < 2.0.35-2
    python3-sqlalchemy+postgresql_pg8000 < 2.0.35-2
    python3-stompest < 2.3.0-17
    python3-stompest-twisted < 2.3.0-17
    python3-subvertpy < 0.10.1-23
    python3-tdlib < 0.9.2-13
    python3-tdlib-devel < 0.9.2-13
    python3-testinfra < 5.3.1-15
    python3-timeunit < 1.1.0-14
    python3-tmt < 1.27.0-2
    python3-transtats-cli < 0.6.0-8
    python3-trollius < 2.1-29
    python3-tweepy < 4.7.0-10
    python3-tweepy+async < 4.7.0-10
    python3-tweepy+socks < 4.7.0-10
    python3-twitter < 3.5-19
    python3-typed_ast < 1.5.5-3
    python3-typer+all < 0.11.1-2
    python3-uamqp < 1.6.5-2
    python3-vagrantpy < 0.6.0-14
    python3-vecrec < 0.3.1-18
    python3-vitrageclient < 4.8.0-2
    python3-webpy < 0.62-11
    python3-woffTools < 0.1-0.40
    python3-wsaccel < 0.6.6-4
    python3-wtforms-sqlalchemy < 0.3.0-8
    python3-y-py < 0.6.0-5
    python3-ypy-websocket < 0.8.4-4
    python3-zanata-client < 1.5.3-19
    python3-zanata2fedmsg < 0.2-30
    python3-zbase32 < 1.1.5-33
    python3-zodbpickle < 3.2-3
    python3-zope-fixers < 1.1.2-33
    python3-zopeundo < 6.0-6
    qpid-dispatch-console < 1.19.0-10
    qpid-dispatch-router < 1.19.0-10
    ruff-lsp < 0.0.53-2
    tmt-all < 1.27.0-2
    tmt-provision-beaker < 1.27.0-2
    tmt-provision-container < 1.27.0-2
    tmt-provision-virtual < 1.27.0-2
    tmt-report-html < 1.27.0-2
    tmt-report-junit < 1.27.0-2
    tmt-report-polarion < 1.27.0-2
    tmt-report-reportportal < 1.27.0-2
    woffTools < 0.1-0.40
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2302853)

    libreoffice-writer2latex < 1.0.2-41
    (See https://src.fedoraproject.org/rpms/writer2latex/c/74f42c8fcd2009bc23b2d0ff7005dda9afa50027)

    torque < 6.1.3-14
    torque-libs < 6.1.3-14
    (See https://src.fedoraproject.org/rpms/torque/c/5f8d64fc9a899f4b94e63685a29f4cc95ef2f829)

    kf5-kitinerary < 23.08.5-7
    kf5-kitinerary-devel < 23.08.5-7
    (See https://src.fedoraproject.org/rpms/kf5-kitinerary/c/0d6cd68645c84c27a9aef46f8dd88056396eae0f)

    gnome-online-miners < 3.34.0-12
    (See https://src.fedoraproject.org/rpms/gnome-online-miners/c/aed3cac7c83e5f4787a7cf60eda4a8aa8fe47c59)

    dmraid < 1.0.0.rc16-61
    dmraid-devel < 1.0.0.rc16-61
    dmraid-events < 1.0.0.rc16-61
    dmraid-events-logwatch < 1.0.0.rc16-61
    dmraid-libs < 1.0.0.rc16-61
    (See https://src.fedoraproject.org/rpms/dmraid/c/2a27f40357e52d5497a0245b05624ce37b8474e6)

    sqlninja < 0.2.999-0.24
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2405419)

    artifacts < 0.0.20240518-5
    asv < 0.5.1-17
    bandit < 1.8.2-3
    bst-external < 0.30.0-10
    cantera-devel < 3.1.0-3
    cantoolz < 3.7.0-24
    cfn-lint < 1.36.0-2
    cfn-lint+full < 1.36.0-2
    cfn-lint+graph < 1.36.0-2
    cfn-lint+junit < 1.36.0-2
    cfn-lint+sarif < 1.36.0-2
    check-manifest < 0.50-3
    cjdns-graph < 21.1-18
    coapthon3 < 1.0.1-23
    cranc < 1.1.0-20
    credslayer < 0.1.2-18
    dcrpm < 0.6.3-14
    dingz < 0.5.0-11
    dmlite-dpm-tester < 1.15.2-22
    dmlite-dpmhead-domeonly < 1.15.2-22
    dmlite-shell < 1.15.2-22
    dnsgen < 1.0.4-17
    fedora-business-cards < 2.3.0-13
    fedscm-admin < 1.1.7-10
    gfal2-util-scripts < 1.9.1-2
    goobook < 3.5-15
    hashid < 3.1.4-24
    hypershell < 2.7.0-2
    imagehash-demo < 4.3.2-5
    ioc-writer < 0.3.3-23
    ipa-hcc-server < 0.18-4
    ipgetter2 < 1.1.11-17
    kerberoast < 0.1.4-16
    ldapdomaindump < 0.9.3-19
    ldeep < 1.0.9-16
    lecm < 0.0.7-28
    linode-cli < 5.35.0-8
    linux-thermaltake-rgb < 0.2.0-21
    metrics2mqtt < 0.1.18-17
    minidump < 0.0.24-3
    mirrormanager2 < 1.0.0-11
    mirrormanager2-backend < 1.0.0-11
    mirrormanager2-crawler < 1.0.0-11
    mirrormanager2-lib < 1.0.0-11
    mirrormanager2-statistics < 1.0.0-11
    mom < 0.6.4-12
    mygnuhealth < 1.0.5-13
    mystrom < 2.0.0-16
    netstat-monitor < 1.1.3-32
    neuron < 8.2.6-3
    neuron-devel < 8.2.6-3
    neuron-mpich < 8.2.6-3
    neuron-mpich-devel < 8.2.6-3
    neuron-openmpi < 8.2.6-3
    neuron-openmpi-devel < 8.2.6-3
    nik4 < 1.7.0-6
    nova-agent < 2.1.25-12
    pag < 0.8-24
    pagure < 5.14.1-7
    pagure-ci < 5.14.1-7
    pagure-ev < 5.14.1-7
    pagure-loadjson < 5.14.1-7
    pagure-logcom < 5.14.1-7
    pagure-milters < 5.14.1-7
    pagure-mirror < 5.14.1-7
    pagure-theme-chameleon < 5.14.1-7
    pagure-theme-pagureio < 5.14.1-7
    pagure-theme-srcfpo < 5.14.1-7
    pagure-web-apache-httpd < 5.14.1-7
    pagure-web-nginx < 5.14.1-7
    pagure-webhook < 5.14.1-7
    parsero < 0.81-34
    past-time < 0.3.1-3
    pdc-client < 1.8.0-36
    pdfposter < 0.7.post1-25
    poezio < 0.14-13
    poezio-doc < 0.14-13
    postgresql15-contrib < 15.8-2
    postgresql15-plpython3 < 15.8-2
    postgresql15-test < 15.8-2
    postgresql15-upgrade < 15.8-2
    postgresql15-upgrade-devel < 15.8-2
    prewikka < 5.2.0-19
    pwncat < 0.1.0-18
    pypykatz < 0.3.15-16
    pysubnettree < 0.35-12
    python-hudman-doc < 9.0.0-11
    python-idna-ssl < 1.1.0-24
    python-mizani-doc < 0.13.5-2
    python-pkginfo2-doc < 30.0.0-7
    python-play-scraper < 0.6.0-21
    python-ufl-demo < 2019.1.0-25
    python-ufl-test < 2019.1.0-25
    python3-ATpy < 0.9.7-44
    python3-AWSIoTPythonSDK < 1.4.9-17
    python3-GeographicLib < 2.0-3
    python3-PyDrive2 < 1.20.0-3
    python3-PyLink < 0.3.2-33
    python3-TGScheduler < 1.7.0-33
    python3-XStatic-roboto-fontface < 0.5.0.0-30
    python3-accuweather < 0.0.11-17
    python3-adafruit-pureio < 1.1.10-9
    python3-adapt < 1.0.0-11
    python3-adjustText < 1.3.0-3
    python3-afsapi < 0.2.8-3
    python3-aioasuswrt < 1.4.0-12
    python3-aiocmd < 0.1.5-17
    python3-aioeafm < 1.0.0-17
    python3-aioesphomeapi < 15.0.0-5
    python3-aioflo < 0.4.2-15
    python3-aiogqlc < 1.0.4-17
    python3-aiohomekit < 0.2.60-17
    python3-aiohttp-sse-client < 0.2.0-17
    python3-aiohue < 2.2.0-19
    python3-aioiotprov < 0.0.7-16
    python3-aiokafka < 0.12.0-3
    python3-aiolifx < 0.8.9-10
    python3-aiomultiprocess < 0.9.1-3
    python3-aionotion < 2.0.3-17
    python3-aiopg < 1.3.4-11
    python3-aiorestapi < 0.1.1-19
    python3-aiosecretsdump < 0.0.2-16
    python3-aiosmb < 0.2.35-15
    python3-aiosnmp < 0.5.0-13
    python3-aiowinreg < 0.0.12-3
    python3-ajpy < 0.0.5-19
    python3-alsaaudio < 0.10.0-6
    python3-amply < 0.1.6-10
    python3-ansicolors < 1.1.8-29
    python3-ansiwrap < 0.8.4-20
    python3-anyconfig < 0.13.0-12
    python3-aresponses < 3.0.0-5
    python3-arm-preprocessing < 0.2.5-2
    python3-astor < 0.8.1-25
    python3-astral < 3.2-9
    python3-async-upnp-client < 0.14.15-17
    python3-atomicwrites < 1.4.1-14
    python3-auth-credential < 1.1-13
    python3-aws-sam-translator < 1.98.0-2
    python3-aws-xray-sdk < 2.14.0-9
    python3-awsiotsdk < 1.22.0-3
    python3-baluhn < 0.1.2-23
    python3-barbicanclient < 7.0.0-4
    python3-bash-kernel < 0.9.3-6
    python3-betamax-matchers < 0.4.0-25
    python3-betamax-serializers < 0.2.0-25
    python3-bluepyopt < 1.14.11-4
    python3-brial < 1.2.12-8
    python3-cachy < 0.3.0-21
    python3-cantera < 3.1.0-3
    python3-case < 1.5.3-23
    python3-chalice < 1.31.2-4
    python3-check-manifest < 0.50-3
    python3-chirpstack-api < 3.9.4-15
    python3-cjdns < 21.1-18
    python3-click-help-colors < 0.9.1-14
    python3-cliff-tablib < 1.1-38
    python3-cloudant < 2.15.0-14
    python3-coapthon3 < 1.0.1-23
    python3-colorthief < 0.2.1-7
    python3-commandparse < 1.0.8-17
    python3-compal < 0.2.0-16
    python3-connect-box < 0.4.0-5
    python3-coronavirus < 1.1.1-16
    python3-crcelk < 1.3-23
    python3-credslayer < 0.1.2-18
    python3-cx-oracle < 8.3.0-12
    python3-cxxfilt < 0.2.0-19
    python3-cysignals < 1.11.4-7
    python3-cysignals-devel < 1.11.4-7
    python3-daikin < 2.4.0-17
    python3-danfossair < 0.1.0-18
    python3-databases < 0.9.0-5
    python3-databases+aiomysql < 0.9.0-5
    python3-databases+aiopg < 0.9.0-5
    python3-databases+aiosqlite < 0.9.0-5
    python3-databases+asyncmy < 0.9.0-5
    python3-databases+asyncpg < 0.9.0-5
    python3-databases+mysql < 0.9.0-5
    python3-databases+postgresql < 0.9.0-5
    python3-databases+sqlite < 0.9.0-5
    python3-dataclassy < 1.0.1-3
    python3-dateutils < 0.6.8-18
    python3-datrie < 0.8.2-30
    python3-dbutils < 3.0.3-9
    python3-deconz < 76-16
    python3-designateclient < 6.1.0-3
    python3-designateclient-tests < 6.1.0-3
    python3-devolo-home-control-api < 0.16.0-18
    python3-dfdatetime < 20240504-3
    python3-dictdumper < 0.8.4-14
    python3-didl-lite < 1.2.5-18
    python3-dingz < 0.5.0-11
    python3-distro-info < 0.18-24
    python3-django-contrib-comments < 2.0.0-18
    python3-django-prometheus < 2.1.0-15
    python3-django-threadedcomments < 1.2-28
    python3-django4.2 < 4.2.28-2
    python3-dlib < 19.24.8-4
    python3-dmlite < 1.15.2-22
    python3-dnsgen < 1.0.4-17
    python3-dnspython < 2.7.0-5
    python3-dnspython+dnssec < 2.7.0-5
    python3-dnspython+doh < 2.7.0-5
    python3-dnspython+doq < 2.7.0-5
    python3-dnspython+idna < 2.7.0-5
    python3-dnspython+trio < 2.7.0-5
    python3-docx < 1.1.2-5
    python3-dolfin < 2019.1.0.post0-57
    python3-dtfabric < 0.0.20230520-11
    python3-earthpy < 0.9.4-14
    python3-easyco < 0.2.3-17
    python3-edimax < 0.2.1-16
    python3-editdistance < 0.8.1-5
    python3-enrich < 1.2.7-17
    python3-enturclient < 0.2.1-17
    python3-epi < 0.2.1-14
    python3-epson-projector < 0.2.3-16
    python3-epub < 0.5.2-37
    python3-esbonio+dev < 1.0.0b3-5
    python3-esbonio+typecheck < 1.0.0b3-5
    python3-fedora < 1.1.1-15
    python3-fedora-flask < 1.1.1-15
    python3-ffc < 2019.1.0.post0-25
    python3-ffmpeg-python < 0.2.0-9
    python3-fiat < 2019.1.0-24
    python3-firkin < 0.02-46
    python3-flann < 1.9.2-12
    python3-flask-xml-rpc < 0.1.2-35
    python3-friendlyloris < 1.0.1-18
    python3-fuzzywuzzy < 0.18.0-19
    python3-gabbi < 2.7.2-10
    python3-gammu < 3.2.4-14
    python3-gear < 0.16.0-8
    python3-gekitchen < 0.2.19-16
    python3-genty < 1.3.2-24
    python3-geoplot < 0.5.1-14
    python3-gfal2 < 1.13.1-2
    python3-gfal2-util < 1.9.1-2
    python3-gilt < 1.2.2-13
    python3-gios < 0.1.4-18
    python3-git-url-parse < 1.2.2-28
    python3-glances-api < 0.2.0-24
    python3-gphoto2 < 2.0.0-22
    python3-graphql-relay < 3.2.0-11
    python3-grip < 4.6.2-3
    python3-habitipy < 0.3.0-16
    python3-hass-data-detective < 2.4-16
    python3-hatasmota < 0.7.3-7
    python3-haversion < 24.6.1-3
    python3-hdate < 0.9.11-17
    python3-hgdistver < 0.25-32
    python3-hikvision < 2.0.3-16
    python3-hole < 0.9.0-2
    python3-homeconnect < 0.6.3-17
    python3-homeworks < 0.0.6-16
    python3-hstspreload < 2025.1.1-3
    python3-hudman < 9.0.0-11
    python3-hypercorn+uvloop < 0.17.3-8
    python3-hypershell+postgres < 2.7.0-2
    python3-hypothesis-fspaths < 0.1-21
    python3-imagehash < 4.3.2-5
    python3-instant < 2016.1.0-32
    python3-ipahcc < 0.18-4
    python3-ipahcc+server < 0.18-4
    python3-ipgetter2 < 1.1.11-17
    python3-iptools < 0.7.0-16
    python3-iso-639 < 0.4.5-30
    python3-itanium_demangler < 1.1-10
    python3-janus < 1.2.0-2
    python3-javalang < 0.13.0-16
    python3-javaobj < 0.4.4-3
    python3-jenkins < 1.8.2-7
    python3-jenkins-job-builder < 1:6.4.2-3
    python3-json2table < 1.1.5-24
    python3-jsonpath-rw-ext < 1.2.2-17
    python3-jsons < 1.5.0-14
    python3-jupyter-sphinx < 0.5.3-6
    python3-keepassxc-browser < 0.1.8-12
    python3-kerberoast < 0.1.4-16
    python3-kismet-rest < 2019.5.2-17
    python3-korean-lunar-calendar < 0.2.1-17
    python3-ldapdomaindump < 0.9.3-19
    python3-ldappool < 3.0.0-14
    python3-ldeep < 1.0.9-16
    python3-lfpy < 2.3.2-6
    python3-linkheader < 0.4.3-18
    python3-m2crypto < 0.41.0^git20240613.3156614-2
    python3-m2r < 0.3.1-10
    python3-magnumclient < 4.7.0-3
    python3-magnumclient-tests < 4.7.0-3
    python3-makeelf < 0.3.2-19
    python3-markups < 4.0.0-3
    python3-marshmallow-enum < 1.5.1-19
    python3-masscan < 0.1.6-18
    python3-messaging < 1.2-13
    python3-metno < 0.8.1-16
    python3-metrics2mqtt < 0.1.18-17
    python3-mido < 1.2.9-23
    python3-migrate < 0.13.0-21
    python3-minidump < 0.0.24-3
    python3-mizani < 0.13.5-2
    python3-mne < 1.9.0-4
    python3-mne-bids < 0.16.0-13
    python3-mne-bids+full < 0.16.0-13
    python3-moksha-common < 1.2.5-36
    python3-moksha-hub < 1.5.17-26
    python3-mongoquery < 1.4.2-10
    python3-mpd < 0.2.1-43
    python3-mrcrowbar < 0.8.0-17
    python3-msldap < 0.3.26-15
    python3-mutatormath < 3.0.1-15
    python3-mystrom < 2.0.0-16
    python3-nanoid < 2.0.0-18
    python3-natlas-libnmap < 0.7.1-18
    python3-nb2plots < 0.7.2-6
    python3-ndeflib < 0.3.3-4
    python3-ndg_httpsclient < 0.5.1-24
    python3-neatdend < 0.9.2-22
    python3-nessus-file-reader < 0.2.0-19
    python3-netdata < 0.2.0-18
    python3-netpyne < 1.0.7-6
    python3-network-runner < 0.3.6-17
    python3-neurodsp < 2.3.0-3
    python3-neuron < 8.2.6-3
    python3-neuron-mpich < 8.2.6-3
    python3-neuron-openmpi < 8.2.6-3
    python3-neurosynth < 0.3.8-17
    python3-neurotune < 0.2.6-9
    python3-nfcpy < 1.0.4-3
    python3-niaarmts < 0.2.0-3
    python3-nilearn < 0.11.1-4
    python3-nipype < 1.10.0-3
    python3-nipype+data < 1.10.0-3
    python3-nipype+duecredit < 1.10.0-3
    python3-nipype+nipy < 1.10.0-3
    python3-nipype+pybids < 1.10.0-3
    python3-nipype+ssh < 1.10.0-3
    python3-nose < 1.3.7-63
    python3-nose-testconfig < 0.10-36
    python3-nose-timer < 1.0.0-17
    python3-nptyping < 2.5.0-3
    python3-nrf24 < 1.1.1-16
    python3-nss < 1.0.1^20210803hg9de14a6f77e2-13
    python3-nuheat < 1.0.1-5
    python3-octave-kernel < 0.36.0-4
    python3-odml < 1.5.4-7
    python3-omemo-backend-signal < 0.3.1~beta-11
    python3-onigurumacffi < 1.3.0-3
    python3-openctm < 0.0.6-3
    python3-opendata-transport < 0.5.0-3
    python3-opensensemap-api < 0.1.5-24
    python3-opentelemetry-contrib-instrumentations < 2:0.48~b0-2
    python3-opentelemetry-distro < 2:0.48~b0-2
    python3-opentelemetry-distro+otlp < 2:0.48~b0-2
    python3-opentelemetry-exporter-opencensus < 0.48~b0-2
    python3-opentelemetry-exporter-otlp < 1.27.0-2
    python3-opentelemetry-exporter-otlp-proto-common < 1.27.0-2
    python3-opentelemetry-exporter-otlp-proto-grpc < 1.27.0-2
    python3-opentelemetry-exporter-otlp-proto-http < 1.27.0-2
    python3-opentelemetry-exporter-prometheus < 0.48~b0-2
    python3-opentelemetry-exporter-richconsole < 2:0.48~b0-2
    python3-opentelemetry-exporter-zipkin < 1.27.0-2
    python3-opentelemetry-exporter-zipkin-json < 1.27.0-2
    python3-opentelemetry-exporter-zipkin-proto-http < 1.27.0-2
    python3-opentelemetry-instrumentation < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-aiohttp-client < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-aiohttp-client+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-aiohttp-server < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-aiohttp-server+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-aiopg < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-aiopg+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-asgi < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-asgi+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-asyncio < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-asyncio+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-asyncpg < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-asyncpg+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-aws-lambda < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-aws-lambda+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-boto < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-boto+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-boto3sqs < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-boto3sqs+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-botocore < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-botocore+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-celery < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-celery+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-dbapi < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-dbapi+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-django < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-django+asgi < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-django+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-elasticsearch < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-elasticsearch+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-fastapi < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-fastapi+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-flask < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-flask+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-httpx < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-httpx+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-jinja2 < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-jinja2+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-kafka-python < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-kafka-python+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-logging < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-logging+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-mysql < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-mysql+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-mysqlclient < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-mysqlclient+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pika < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pika+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-psycopg < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-psycopg+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-psycopg2 < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-psycopg2+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pymemcache < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pymemcache+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pymongo < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pymongo+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pymysql < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pymysql+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pyramid < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-pyramid+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-redis < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-redis+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-requests < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-requests+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-sqlalchemy < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-sqlalchemy+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-sqlite3 < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-sqlite3+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-system-metrics < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-system-metrics+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-threading < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-threading+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-tornado < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-tornado+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-urllib < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-urllib+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-urllib3 < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-urllib3+instruments < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-wsgi < 2:0.48~b0-2
    python3-opentelemetry-instrumentation-wsgi+instruments < 2:0.48~b0-2
    python3-opentelemetry-opentracing-shim < 0.48~b0-2
    python3-opentelemetry-processor-baggage < 2:0.48~b0-2
    python3-opentelemetry-propagator-aws-xray < 1.0.2-2
    python3-opentelemetry-propagator-b3 < 1.27.0-2
    python3-opentelemetry-propagator-jaeger < 1.27.0-2
    python3-opentelemetry-propagator-ot-trace < 2:0.48~b0-2
    python3-opentelemetry-proto < 1.27.0-2
    python3-opentelemetry-resource-detector-azure < 0.1.5-5
    python3-opentelemetry-sdk < 1.27.0-2
    python3-opentelemetry-sdk-extension-aws < 2.0.2-2
    python3-opentelemetry-semantic-conventions < 0.48~b0-2
    python3-opentelemetry-test-utils < 0.48~b0-2
    python3-opentelemetry-util-http < 2:0.48~b0-2
    python3-opentracing < 2.4.0-15
    python3-os-testr < 3.0.0-11
    python3-oslo-middleware < 6.0.0-5
    python3-oslo-middleware-tests < 6.0.0-5
    python3-ouimeaux < 0.8.2-26
    python3-papermill < 2.6.0-7
    python3-papermill+all < 2.6.0-7
    python3-papermill+azure < 2.6.0-7
    python3-papermill+black < 2.6.0-7
    python3-papermill+gcs < 2.6.0-7
    python3-papermill+github < 2.6.0-7
    python3-papermill+hdfs < 2.6.0-7
    python3-papermill+s3 < 2.6.0-7
    python3-pdc-client < 1.8.0-36
    python3-pep440 < 0.1.2-9
    python3-pifpaf < 2.2.2-25
    python3-pingouin < 0.5.5-3
    python3-pint+dask < 0.24.4-3
    python3-pkginfo2 < 30.0.0-7
    python3-plaintable < 0.1.2-5
    python3-plotnine < 0.14.5-3
    python3-plotnine+extra < 0.14.5-3
    python3-pluggy1.3 < 1.3.0-10
    python3-plugnplay < 0.5.4-19
    python3-policyuniverse < 1.3.2.20201012-17
    python3-postgresql < 1.2.2-18
    python3-poyo < 0.5.0-19
    python3-praw < 7.8.1-3
    python3-prawcore < 2.4.0-3
    python3-prewikka < 5.2.0-19
    python3-prewikka-updatedb < 5.2.0-17
    python3-promise < 2.3.0-22
    python3-psycogreen < 1.0.2-17
    python3-psycopg2-debug < 2.9.9-9
    python3-pwncat < 0.1.0-18
    python3-py-algorand-sdk < 2.8.0-2
    python3-py2pack < 0.6.3-33
    python3-pyDes < 2.0.1^20240820gite988a5f-3
    python3-pyairnow < 1.1.0-16
    python3-pyairvisual < 2023.12.0-3
    python3-pyarlo < 0.2.4-17
    python3-pybalboa < 0.10-17
    python3-pybids < 0.19.0-2
    python3-pybids+plotting < 0.19.0-2
    python3-pybids+test < 0.19.0-2
    python3-pybids+tests < 0.19.0-2
    python3-pybv < 0.7.6-6
    python3-pybv+export < 0.7.5-10
    python3-pycoingecko < 1.3.0-16
    python3-pycomfoair < 0.0.4-16
    python3-pycomm3 < 0.10.2-16
    python3-pyeclib < 1.6.0-19
    python3-pyemby < 1.6-16
    python3-pyemd < 1.0.0-8
    python3-pygatt < 5.0.0-3
    python3-pygeoip < 0.2.6-41
    python3-pygrocy < 0.23.0-16
    python3-pyhomematic < 0.1.78-5
    python3-pyi2cflash < 0.2.2-18
    python3-pyinels < 0.5.5-16
    python3-pyiqvia < 2023.12.0-3
    python3-pykdl < 1.5.1-13
    python3-pylotoncycle < 0.2.2-17
    python3-pymata-express < 1.21-14
    python3-pymochad < 0.2.0-17
    python3-pymod2pkg < 0.17.1-24
    python3-pynn < 0.12.4-3
    python3-pynuvo < 0.2-16
    python3-pyopenuv < 2.0.0-16
    python3-pyotgw < 1.0b1-17
    python3-pypcapkit < 0.15.5-14
    python3-pypck < 0.7.9-16
    python3-pypet < 0.6.1-9
    python3-pyphi < 1.2.1-27
    python3-pysaml2 < 7.4.2-6
    python3-pyserial-asyncio < 0.6-14
    python3-pysignals < 0.1.4-6
    python3-pysmb < 1.2.10-3
    python3-pysmt < 0.9.5-10
    python3-pysqueezebox < 0.5.5-18
    python3-pytapo < 0.11-16
    python3-pytest-error-for-skips < 2.0.2-16
    python3-pytest-twisted < 1.14.3-2
    python3-pytest7 < 7.4.3-5
    python3-pytile < 2022.02.0-12
    python3-pytimeparse < 1.1.8-24
    python3-pytz-deprecation-shim < 0.1.0.post0-13
    python3-pyupgrade < 3.3.0-10
    python3-pyvit < 0.2.1-24
    python3-pywatchman < 2021.05.10.00-29
    python3-q < 2.6-34
    python3-rak811 < 0.7.3-17
    python3-random2 < 1.0.2-5
    python3-rangeparser < 0.1.3-18
    python3-rawkit < 0.6.0-22
    python3-reactivex < 4.0.4-9
    python3-readlike < 0.1.3-16
    python3-receptor-python-worker < 1.4.8-3
    python3-recordclass < 0.22.0.2-4
    python3-regenmaschine < 2022.9.2-10
    python3-registry < 1.4-17
    python3-remoto < 1.2.1-12
    python3-reparser < 1.4.3-16
    python3-requests-credssp < 2.0.0-11
    python3-retrying < 1.3.3-17
    python3-ring-doorbell < 0.7.1-15
    python3-rows < 0.4.1-25
    python3-rtmidi < 1.5.8-4
    python3-scanless < 2.2.1-3
    python3-scikit-build < 0.18.1-3
    python3-scikit-misc < 0.5.1-7
    python3-scripttester < 0.1-24
    python3-sentry-sdk+opentelemetry < 2.17.0-4
    python3-sentry-sdk+opentelemetry-experimental < 2.17.0-4
    python3-serpy < 0.3.1-23
    python3-setuptools_git < 1.2-17
    python3-shelly < 0.2.6-16
    python3-shodan < 1.31.0-5
    python3-signon < 2.1-25
    python3-simframe < 1.0.5-6
    python3-simplebayes < 1.5.8-28
    python3-simplegeneric < 0.8.1-38
    python3-simplevisor < 1.3-13
    python3-singledispatch < 3.4.0.3-35
    python3-sipvicious < 0.3.3-15
    python3-slacker < 0.14.0-20
    python3-smi < 1.5.0-3
    python3-snakemake-executor-plugin-azure-batch < 0.3.0-4
    python3-snallygaster < 0.0.13-3
    python3-socialscan < 2.0.1-3
    python3-socks5line < 0.0.4-18
    python3-sortedcollections < 2.1.0-19
    python3-spec < 1.4.1-19
    python3-sphinx-documatt-theme < 0.0.6-7
    python3-sphinxcontrib-asyncio < 0.3.0-15
    python3-sphinxcontrib-blockdiag < 2.0.0-17
    python3-sphinxcontrib-github-alt < 1.2-19
    python3-sphinxcontrib-phpdomain < 0.12.0-3
    python3-sphinxcontrib-seqdiag < 2.0.0-15
    python3-sphobjinv < 2.3.1.1-3
    python3-sqlalchemy+mypy < 2.0.35-2
    python3-sqlalchemy+mysql_connector < 2.0.48-2
    python3-ssdp < 1.3.0-7
    python3-sseclient < 0.0.27-17
    python3-sseclient-py < 1.7-17
    python3-sshpubkeys < 3.3.1-28
    python3-stackprinter < 0.2.10-5
    python3-statsd < 3.2.1-33
    python3-stdiomask < 0.0.6-17
    python3-stochastic < 0.7.0-10
    python3-stomper < 0.4.3-23
    python3-stopit < 1.1.2-14
    python3-subarulink < 0.3.11-17
    python3-taskflow < 5.9.1-4
    python3-tasmotadevicecontroller < 0.0.8-17
    python3-tbtrim < 0.3.1-19
    python3-tensile < 6.2.0-2
    python3-teslajsonpy < 0.11.0-16
    python3-testing.common.database < 2.0.3-19
    python3-testing.postgresql < 1.3.0-24
    python3-textparser < 0.24.0-3
    python3-textwrap3 < 0.9.2-18
    python3-toposort < 1.10-14
    python3-tosca-parser < 2.12.0-3
    python3-tree-format < 0.1.2-25
    python3-typedecorator < 0.0.5-17
    python3-typish < 1.9.3-14
    python3-ufl < 2019.1.0-25
    python3-universal-pathlib < 0.2.5-3
    python3-upnpy < 1.1.8-16
    python3-urlbuster < 0.5.1-6
    python3-uvloop < 0.19.0-6
    python3-velbus < 2.1.2-15
    python3-vici < 5.9.14-6
    python3-volkszaehler < 0.2.1-16
    python3-voluptuous-serialize < 2.4.0-17
    python3-vsure < 1.6.0-16
    python3-waqiasync < 1.0.0-16
    python3-watchgod < 0.8.2-11
    python3-waterfurnace < 1.1.0-17
    python3-webthing < 0.15.0-17
    python3-webthing-ws < 0.1.0-20
    python3-whichcraft < 0.6.1-17
    python3-wiffi < 1.0.1-16
    python3-winacl < 0.1.9-3
    python3-winsspi < 0.0.11-3
    python3-wled < 0.4.4-17
    python3-wloc < 1.1.0-9
    python3-ws4py < 0.5.1-19
    python3-wsgi_intercept < 1.12.0-8
    python3-xboxapi < 2.0.1-16
    python3-xiaomi-gateway < 0.13.3-16
    python3-xpath-expressions < 1.0.2-18
    python3-xunitparser < 1.3.4-11
    python3-yappi < 1.6.0-4
    python3-yaswfp < 0.9.3-21
    python3-zake < 0.2.2-35
    python3-zc-customdoctests < 1.0.1-42
    python3-zdaemon < 4.2.0-30
    python3-zm < 0.5.2-17
    rapid-photo-downloader < 0.9.33-15
    receptor < 1.4.8-3
    receptorctl < 1.4.8-3
    retext < 8.0.0-10
    rows < 0.4.1-25
    rst2txt < 1.1.0-26
    scanless < 2.2.1-3
    secrets < 9.6-4
    sgtk-menu < 1.4.1-17
    shodan < 1.31.0-5
    sigul < 1.2-5
    sigul-bridge < 1.2-5
    sigul-server < 1.2-5
    sipvicious < 0.3.3-15
    snallygaster < 0.0.13-3
    socialscan < 2.0.1-3
    standard-test-roles < 4.13-2
    standard-test-roles-inventory-qemu < 4.13-2
    sysmontask < 1.3.9-17
    trace-summary < 0.92-12
    urlbuster < 0.5.1-6
    wad < 0.4.6-18
    wapiti < 3.0.2-20
    webtech < 1.2.11-13
    wfuzz < 3.1.0-17
    wxGlade < 1.1.1-2
    x-tile < 3.3-17
    xortool < 1.0.2-3
    zeek-zkg < 6.0.4-2
    zeekctl < 6.0.4-2
    psi4 < 1:1.9.1-7
    python3-optking < 0.3.0-7
    python3-pamela < 1.2.0-3
    python3-qcengine < 0.30.0-5
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2373699)

    Field3D < 1.7.3-34
    Field3D-devel < 1.7.3-34
    (See https://src.fedoraproject.org/rpms/Field3D/c/b9115ad851cb1c45c4e6473bc974cc98f9654125)

    webkit2gtk4.0 < 2.47.2-4
    webkit2gtk4.0-devel < 2.47.2-4
    webkit2gtk4.0-doc < 2.47.2-4
    javascriptcoregtk4.0 < 2.47.2-4
    javascriptcoregtk4.0-devel < 2.47.2-4
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2369023)

    perl-Alien-cmake3 < 0.10-3
    perl-Alien-cmake3-tests < 0.10-3
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2440104)

    perl-re-engine-PCRE < 0.17-46
    perl-re-engine-PCRE-tests < 0.17-46
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2434904)

    cinch < 1.4.0-27
    dib-utils < 0.0.11-26
    dnf-plugin-ovl < 0.0.3-24
    dput-ng < 1.21-28
    elements < 6.3.4-7
    elements-alexandria < 2.32.0-7
    elements-alexandria-devel < 2.32.0-7
    elements-devel < 6.3.4-7
    menulibre < 2.3.2-13
    mkdocs-material+git < 9.7.1-3
    mkdocs-material+recommended < 9.7.1-3
    mopidy < 4.0.0~a15-2
    mopidy-mpd < 4.0.0~a4-2
    mu < 1.2.0-25
    muse < 1:4.2.1-10
    nikola < 8.3.3-5
    nwg-panel < 0.10.5-7
    obserware < 0.2.10-6
    odcs < 0.9.0-6
    odcs-client < 0.9.0-6
    opae < 2.13.0-4
    opae-devel < 2.13.0-4
    opae-extra-tools < 2.13.0-4
    pagure-dist-git < 1.15-7
    pgzero < 1.2.1-22
    platformio < 6.1.19-2
    protonvpn-cli < 2.2.12-10
    python-nipy-doc < 1:0.6.1-6
    python3-Naked < 0.1.31-33
    python3-PyLEMS < 0.6.8-6
    python3-PyQt4 < 4.12.3-52
    python3-PyQt4-devel < 4.12.3-52
    python3-PyQt4-webkit < 4.12.3-52
    python3-Pykka < 4.2.0-7
    python3-XStatic-Angular < 1:1.5.8.0-33
    python3-XStatic-Angular-Bootstrap < 2.2.0.0-32
    python3-XStatic-Angular-FileUpload < 12.0.4.0-36
    python3-XStatic-Angular-Gettext < 2.1.0.2-37
    python3-XStatic-Angular-Mock < 1.2.1.1-39
    python3-XStatic-Angular-lrdragndrop < 1.0.2.2-38
    python3-XStatic-Bootstrap-Datepicker < 1.3.1.0-39
    python3-XStatic-D3 < 3.5.17.0-33
    python3-XStatic-Font-Awesome < 6.2.1.1-14
    python3-XStatic-Hogan < 2.0.0.2-40
    python3-XStatic-JQuery-Migrate < 1.2.1.1-39
    python3-XStatic-JQuery-TableSorter < 2.14.5.1-39
    python3-XStatic-JQuery-quicksearch < 2.0.3.2-7
    python3-XStatic-JSEncrypt < 2.3.1.1-31
    python3-XStatic-Jasmine < 2.4.1.1-31
    python3-XStatic-Magic-Search < 0.2.5.1-35
    python3-XStatic-QUnit < 1.14.0.2-39
    python3-XStatic-Rickshaw < 1.5.0.0-41
    python3-XStatic-Spin < 1.2.5.2-40
    python3-XStatic-bootswatch < 3.3.7.0-33
    python3-XStatic-mdi < 1.6.50.2-23
    python3-XStatic-smart-table < 1.4.13.2-31
    python3-XStatic-termjs < 0.0.7.0-31
    python3-adafruit-board-toolkit < 1.1.2-7
    python3-agate < 1.13.0-5
    python3-agate-dbf < 0.2.3-8
    python3-agate-excel < 0.4.1-8
    python3-agate-sql < 0.7.2-8
    python3-aiohttp-negotiate < 0.11-32
    python3-airspeed < 0.6.0-11
    python3-arpeggio < 2.0.2-12
    python3-autograd < 1.8.0-7
    python3-autograd+scipy < 1.8.0-7
    python3-azure-functions-devops-build < 0.0.22-20
    python3-azure-loganalytics < 0.1.0-27
    python3-bioframe < 0.8.0-8
    python3-bleach+css < 6.2.0-8
    python3-botan2 < 2.19.5-18
    python3-bowler < 0.9.0-20
    python3-bowler-docs < 0.9.0-20
    python3-box < 7.2.0-4
    python3-brian2 < 2.9.0-7
    python3-bsmschema < 0.1.1-6
    python3-catkin_lint < 1.6.22-15
    python3-ci-info < 0.3.0-7
    python3-cmake-build-extension < 0.6.1-11
    python3-cmake-build-extension-doc < 0.6.1-11
    python3-cradox < 2.1.0-28
    python3-cro < 0.0.5.2-13
    python3-csvkit < 2.1.0-2
    python3-cyipopt < 1.5.0-10
    python3-cyipopt-tests < 1.5.0-10
    python3-dipy < 1.11.0-9
    python3-django-ipware < 4.0.2-17
    python3-django-rules < 3.5.0-5
    python3-dput < 1.21-28
    python3-efel < 5.7.16-7
    python3-elephant < 1.1.1-7
    python3-etelemetry < 0.3.1-6
    python3-fissix < 20.8.0-21
    python3-fonttools+symfont < 4.62.1-2
    python3-formulaic < 1.1.1-7
    python3-formulaic+arrow < 1.1.1-7
    python3-formulaic+calculus < 1.1.1-7
    python3-gcsfs < 2025.9.0-3
    python3-gcsfs+crc < 2025.9.0-3
    python3-gcsfs+gcsfuse < 2025.9.0-3
    python3-graphene < 3.0b6-19
    python3-hdf5storage < 0.1.18-21
    python3-hl7 < 0.4.5-12
    python3-hokuyoaist < 3.0.2-58
    python3-iep < 3.7-38
    python3-intern < 1.4.2-6
    python3-ipython+notebook < 8.37.0-12
    python3-jschema-to-python < 1.2.3-24
    python3-jsonpath-rw < 1.4.0-28
    python3-junit-xml < 1.9^20200222gitba89b41-26
    python3-jupyter-c-kernel < 1.2.2-30
    python3-klusta < 3.0.16-36
    python3-lazy-ops < 0.2.0-22
    python3-lazyarray < 0.6.0-6
    python3-libNeuroML < 0.6.5-8
    python3-libnl3 < 3.12.0-3
    python3-libqtile+wayland < 0.33.0-3
    python3-lqrt < 0.3.3-15
    python3-markdown_2 < 3.4.4-8
    python3-microfs < 1.3.1-31
    python3-mock < 4.0.3-26
    python3-modernize < 0.8.0-22
    python3-monotonic < 1.6-7
    python3-moss < 0.5.0-31
    python3-mrcfile < 1.5.4-7
    python3-murano-pkg-check < 0.3.0-42
    python3-ncclient < 0.7.0-3
    python3-ncclient+libssh < 0.7.0-3
    python3-neurom < 4.0.4-7
    python3-neurom+plotly < 4.0.4-7
    python3-niaarm < 0.4.1-5
    python3-nikola < 8.3.3-5
    python3-nikola+extras < 8.3.3-5
    python3-nipy < 1:0.6.1-6
    python3-nipy+optional < 1:0.6.1-6
    python3-nispor < 1.2.27-7
    python3-nose2+coverage_plugin < 0.15.1-17
    python3-novaclient-os-networks < 0.26-35
    python3-nudatus < 0.0.5-25
    python3-odcs-client < 0.9.0-6
    python3-odcs-common < 0.9.0-6
    python3-opytimizer < 3.1.4-7
    python3-outdated < 0.2.0-22
    python3-pandas-flavor < 0.7.0-4
    python3-parameterized < 0.9.0-18
    python3-parver < 0.5-7
    python3-pastel < 0.2.1-5
    python3-path-and-address < 2.0.1-7
    python3-pdir2 < 1.1.0-8
    python3-pdm-pep517 < 1.1.4-13
    python3-plac < 1.4.5-10
    python3-platformio < 6.1.19-2
    python3-plotly < 5.24.1-9
    python3-probeinterface < 0.2.28-6
    python3-pvc < 0.3.0-31
    python3-py27hash < 1.1.0-24
    python3-pyABF < 2.3.8-10
    python3-pyactivetwo < 0.1-36
    python3-pycatch22 < 0.4.4-16
    python3-pydotplus < 2.0.2-38
    python3-pyedflib < 0.1.42-5
    python3-pyelectro < 0.2.7-11
    python3-pyfim < 6.28-22
    python3-pygls+ws < 2.0.0a5-5
    python3-pylatex < 1.4.2-9
    python3-pylink < 0.3.2-41
    python3-pymatreader < 1.2.2-2
    python3-pynamodb < 6.1.0-6
    python3-pynamodb+signals < 6.1.0-6
    python3-pyprocdev < 0.2-36
    python3-pyqtchart < 5.15.5-24
    python3-pyqtchart-devel < 5.15.5-24
    python3-pyramid_sawing < 1.1.3-29
    python3-pyriemann < 0.8-6
    python3-pyrsistent < 0.20.0-18
    python3-pytest-runner < 4.0-32
    python3-pytest-subtests < 0.15.0-5
    python3-pytest-sugar < 1.1.1-4
    python3-pyudev-qt4 < 0.24.3-13
    python3-pyunicorn < 0.8.2-8
    python3-pyvirtualize < 0.10-27
    python3-pywlroots < 0.17.0-10
    python3-pyxdf < 1.17.0-7
    python3-pyxdf-examples < 1.17.0-7
    python3-pyxid < 1.1-0.37
    python3-pyxs < 0.4.1-34
    python3-rabbitvcs < 0.19-12
    python3-ratelimitingfilter < 1.5-18
    python3-ratinabox < 1.15.3-9
    python3-rdopkg < 1.7.0-11
    python3-read-roi < 1.6.0-17
    python3-renderspec < 2.2.0-13
    python3-restview < 3.0.0-15
    python3-rpmautospec-koji < 0.4.0-13
    python3-saharaclient < 4.2.0-11
    python3-sanlock < 4.2.0-4
    python3-sarif-om < 1.0.4-26
    python3-sciunit < 0.2.8-13
    python3-shade < 1.33.0-20
    python3-simpleaudio < 1.0.4-22
    python3-sklearn-genetic-opt < 0.11.1-17
    python3-sklearn-genetic-opt+seaborn < 0.11.1-17
    python3-snuggs < 1.4.7-25
    python3-sphinx-hoverxref < 1.4.1-8
    python3-sphinx-sitemap < 2.7.2-5
    python3-strictyaml < 1.7.3-16
    python3-system-calls < 6.13.0-6
    python3-toml < 0.10.2-26
    python3-toml-adapt < 0.3.4-7
    python3-totpcgi < 0.6.0-0.28
    python3-vconnector < 0.6.0-23
    python3-vevents < 0.1.0-0.23
    python3-vpoller < 0.7.3-31
    python3-vsts < 0.1.25-22
    python3-vsts-cd-manager < 1.0.2-22
    python3-wavio < 0.0.9-9
    python3-wtf-peewee < 3.0.5-12
    python3-wult < 1.12.48-3
    rabbitvcs-caja < 0.19-12
    rabbitvcs-cli < 0.19-12
    rabbitvcs-nautilus < 0.19-12
    rabbitvcs-nemo < 0.19-12
    rdopkg < 1.7.0-11
    restview < 3.0.0-15
    sourcextractor++ < 1.0.3-5
    sourcextractor++-devel < 1.0.3-5
    spectrographic < 0.9.3-24
    stats-collect < 1.0.59-3
    totpcgi < 0.6.0-0.28
    totpcgi-provisioning < 0.6.0-0.28
    totpcgi-selinux < 0.6.0-0.28
    vpoller < 0.7.3-31
    wult < 1.12.48-3
    xcat < 1.0.4-22
    zezere < 0.5.2-14
    (See https://bugzilla.redhat.com/show_bug.cgi?id=2492124)


pkgId: a059427f68a68d5560e71946c1ce6ee2ff77a9918b912df27050efa4890d7217
name: fedora-release
arch: src
version: 45
epoch: 0
release: 0.10
summary: Fedora release files
url: https://fedoraproject.org/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-release-45-0.10.src.rpm
checksum_type: sha256
description:
  Fedora release files such as various /etc/ files that define the release
  and systemd preset files that determine which services are enabled by default.


pkgId: 721f472d88d7f84a2e4175307694b7125b99a916520566ab021b649855ecdcbf
name: fedora-remix-logos
arch: src
version: 1.0.0
epoch: 0
release: 31.fc45
summary: Fedora Remix logos
url: https://fedoraproject.org/wiki/Legal/Secondary_trademark_usage_guidelines
rpm_license: LicenseRef-Fedora-Logos
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-remix-logos-1.0.0-31.fc45.src.rpm
checksum_type: sha256
description:
  The fedora-remix-logos package contains image files which incorporate the
  Fedora trademarks (the "Marks"). The Marks are trademarks or registered
  trademarks of Red Hat, Inc. in the United States and other countries and
  are used by permission.

  This package and its content may be used and distributed under the Fedora
  Trademark Guidelines, specifically, it is intended for use in a Fedora
  Remix, not a Fedora Spin.

  See the included COPYING file for full information on approved use, copying
  and redistribution of this package and its contents.


pkgId: 4a0df198cccc5d266a0c3daaaf0b380bb5b6a67396f8c3ae48fbd2aa91d8a4c0
name: fedora-repo-zdicts
arch: src
version: 2603.1
epoch: 0
release: 2.fc45
summary: Zstd dictionaries for Fedora repository metadata
url: https://pagure.io/fedora-repo-zdicts
rpm_license: BSD-2-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-repo-zdicts-2603.1-2.fc45.src.rpm
checksum_type: sha256
description:
  zchunk is a compressed file format that splits the file into independent
  chunks.  This package contains zstd libraries tailored for Fedora's repository
  metadata to improve their compression.


pkgId: 5c73d16328f287f2e6b129705e64262710ea817db3d394b9be092055591be9b2
name: fedora-repoquery
arch: src
version: 0.9.1
epoch: 0
release: 2.fc45
summary: Fedora release repos package query tool
url: https://hackage.haskell.org/package/fedora-repoquery
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-repoquery-0.9.1-2.fc45.src.rpm
checksum_type: sha256
description:
  A CLI tool for repoquerying Fedora and Centos Stream release packages:
  by default it displays their version and repo location and
  optionally the repo compose timestamps.

  If you want a short alias then also install fedora-repoquery-short.


pkgId: fe77d3d201db52c9a2318a5ade3d820b28853a0dfbbbe14f4e40fae7f1b5d640
name: fedora-repro
arch: src
version: 0.1^20251007g0bcb874
epoch: 0
release: 6.fc45
summary: Scripts to reproduce builds of Fedora packages
url: https://github.com/keszybz/fedora-repro
rpm_license: LGPL-2.1-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-repro-0.1^20251007g0bcb874-6.fc45.src.rpm
checksum_type: sha256
description:
  This package provide the fedora-repro-build script which can be used to
  do a local mock rebuild of a build that was previously done in koji,
  and the fedora-repro-listener/fedora-repro-worker scripts to listen
  for notifications about finished builds and do rebuilds.

  See https://docs.fedoraproject.org/en-US/reproducible-builds/.


pkgId: 79228c894b859c4ef9c00058f3085b6df9fd8aefaa3d8526de3bdd1c0dec83c6
name: fedora-review
arch: src
version: 0.11.0
epoch: 0
release: 6.fc45
summary: Review tool for fedora rpm packages
url: https://pagure.io/FedoraReview
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-review-0.11.0-6.fc45.src.rpm
checksum_type: sha256
description:
  This tool automates much of the dirty work when reviewing a package
  for the Fedora Package Collection like:

      * Downloading SRPM & SPEC.
      * Download upstream source
      * Check md5sums
      * Build and install package in mock.
      * Run rpmlint.
      * Generate a review template, which becomes the starting
        point for the review work.

  The tool is composed of plugins, one for each supported language.
  As of today, there is plugins for C/C++, Ruby, java, R, perl and
  python.  There is also support for external tests that can be written
  in a simple way in bash.


pkgId: 46e8ade88f63ccb92829a596a7577438194ba587f081e64996859ce7f6f94137
name: fedora-review-plugin-java
arch: src
version: 4.6.1
epoch: 0
release: 22.fc45
summary: Java plugin for FedoraReview
url: https://github.com/fedora-java/fedora-review-plugin-java
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-review-plugin-java-4.6.1-22.fc45.src.rpm
checksum_type: sha256
description:
  This package provides a plugin for FedoraReview tool that allows
  checking packages for conformance with Java packaging guidelines.


pkgId: 0b375329bfd6893a610e3013dfb90900a6f5093fdaa5c9a74006b8df4f3976b8
name: fedora-third-party
arch: src
version: 0.10
epoch: 0
release: 21.fc45
summary: Tool for handling third-party RPM and Flatpak repositories in Fedora
url: https://forge.fedoraproject.org/fesco/fedora-third-party
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-26.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-third-party-0.10-21.fc45.src.rpm
checksum_type: sha256
description:
  fedora-third-party is a tool for handling third-party RPM and Flatpak
  repositories in Fedora.  It is used to handle the user changing their opt-in
  status for these repositories, and enables/disables RPM repositories and
  adds/removes Flatpak repositories as necessary.


pkgId: 7c84a6aba6f92d88dfab1c7162a1388a81f3d87bdebbf3b2ba5c7fdd833ce6cb
name: fedora-upgrade
arch: src
version: 44.1
epoch: 0
release: 2.fc45
summary: Upgrade Fedora to next version using dnf upgrade (unofficial tool)
url: https://github.com/xsuchy/fedora-upgrade
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-upgrade-44.1-2.fc45.src.rpm
checksum_type: sha256
description:
  Upgrade Fedora to next version using dnf upgrade.
  This is attempt to automatize steps as listed here:
  https://fedoraproject.org/wiki/Upgrading_Fedora_using_package_manager

  This is an unofficial tool, for official Fedora-supported
  upgrades please see:
  https://fedoraproject.org/wiki/Upgrading


pkgId: bc509fd07cdee3f3e23281b43963416f678e867505c363061e039ab61c7eedb8
name: fedora-workstation-backgrounds
arch: src
version: 1.6
epoch: 0
release: 10.fc45
summary: Desktop backgrounds for Fedora Workstation
url: https://pagure.io/fedora-design/fedora-workstation-backgrounds
rpm_license: CC-BY-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedora-workstation-backgrounds-1.6-10.fc45.src.rpm
checksum_type: sha256
description:
  The fedora-workstation-backgrounds packages contains the additional standard
  wallpapers for Fedora Workstation.


pkgId: a0434e0275b46b46b6d5526e4823dabc6e3e975a4616eb0d42086aee87097245
name: fedorainfinity-backgrounds
arch: src
version: 0.0.5
epoch: 0
release: 35.fc45
summary: Fedora Infinity desktop backgrounds
url: http://fedoraproject.org/wiki/Artwork/F8Themes/Infinity
rpm_license: LicenseRef-Callaway-LGPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-27.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fedorainfinity-backgrounds-0.0.5-35.fc45.src.rpm
checksum_type: sha256
description:
  This package contains desktop backgrounds for the Fedora Infinity theme,
  which was the default theme for Fedora 8.


pkgId: 182bcefdb68cef5b435c7432ee074024e11ba1b93ae79c3db1a010bebdb29cd3
name: feedbackd
arch: src
version: 0.8.9
epoch: 0
release: 4.fc45
summary: Feedback library for GNOME
url: https://gitlab.freedesktop.org/feedbackd/feedbackd
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/feedbackd-0.8.9-4.fc45.src.rpm
checksum_type: sha256
description:
  feedbackd provides a DBus daemon (feedbackd) to act on events to provide
  haptic, visual and audio feedback. It offers a library (libfeedback) and
  GObject introspection bindings to ease using it from applications.


pkgId: 5221439a617fd293db451a0d263619441e2bcb1f45e3b351f2cdc9b0d94a2281
name: feh
arch: src
version: 3.12.2
epoch: 0
release: 3.fc45
summary: Fast command line image viewer using Imlib2
url: https://feh.finalrewind.org
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/feh-3.12.2-3.fc45.src.rpm
checksum_type: sha256
description:
  feh is a versatile and fast image viewer using imlib2, the
  premier image file handling library. feh has many features,
  from simple single file viewing, to multiple file modes using
  a slide-show or multiple windows. feh supports the creation of
  montages as index prints with many user-configurable options.


pkgId: a848c3ce80c6047d17d09c71c1789af41440acad3b981783136ca5dbd5bd94d0
name: fence-agents
arch: src
version: 4.17.0
epoch: 0
release: 3.fc45
summary: Set of unified programs capable of host isolation ("fencing")
url: https://github.com/ClusterLabs/fence-agents
rpm_license: GPL-2.0-or-later AND LGPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: System Environment/Base
rpm_buildhost: buildhw-x86-16.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fence-agents-4.17.0-3.fc45.src.rpm
checksum_type: sha256
description:
  A collection of executables to handle isolation ("fencing") of possibly
  misbehaving hosts by the means of remote power management, blocking
  network, storage, or similar. They operate through a unified interface
  (calling conventions) devised for the original Red Hat clustering solution.


pkgId: b3efa039e971635700d9f7a7d63ea157f377133cac1614cd00649f9bb57f443a
name: fennel
arch: src
version: 1.6.1
epoch: 0
release: 5.fc45
summary: A Lisp that compiles to Lua
url: https://fennel-lang.org/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fennel-1.6.1-5.fc45.src.rpm
checksum_type: sha256
description:
  Fennel is a Lisp that compiles to Lua. It aims to be easy to use, expressive,
  and has almost zero overhead compared to handwritten Lua.

  * *Full Lua compatibility* - You can use any function or library from Lua.
  * *Zero overhead* - Compiled code should be just as or more efficient than
     hand-written Lua.
  * *Compile-time macros* - Ship compiled code with no runtime dependency on
     Fennel.
  * *Embeddable* - Fennel is a one-file library as well as an executable. Embed it
     in other programs to support runtime extensibility and interactive
     development.

  At https://fennel-lang.org there's a live in-browser repl you can use without
  installing anything.


pkgId: b155a9012e92bb0bd684fc691e6fc1454d932d7b3b96b8da5635983a5ab9f6d2
name: fernflower
arch: src
version: 211.7442.40
epoch: 0
release: 18.fc45
summary: JIdea's java decompiler
url: https://github.com/JetBrains/intellij-community/tree/master/plugins/java-decompiler/engine
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fernflower-211.7442.40-18.fc45.src.rpm
checksum_type: sha256
description:
  JIdea's decompiler is the first actually working analytical decompiler for Java and probably
  for a high-level programming language in general. Naturally it is still under development,
  please send your bug reports and improvement suggestions to the issue tracker.


pkgId: 60cc7a2a9dad37723473c1669d1359778159d48805c5aea0753f875ea1d0e9e7
name: festival
arch: src
version: 2.5.0
epoch: 0
release: 30.fc45
summary: Speech synthesis and text-to-speech system
url: http://www.cstr.ed.ac.uk/projects/festival/
rpm_license: MIT AND GPL-1.0-or-later AND TCL AND BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/festival-2.5.0-30.fc45.src.rpm
checksum_type: sha256
description:
  Festival is a general multi-lingual speech synthesis system developed
  at CSTR. It offers a full text to speech system with various APIs, as
  well as an environment for development and research of speech synthesis
  techniques. It is written in C++ with a Scheme-based command interpreter
  for general control.


pkgId: e115fdd379b754517b0f39280ea2ac5a138a573afd03031ef3c44bdd97347360
name: festival-freebsoft-utils
arch: src
version: 0.10
epoch: 0
release: 45.fc45
summary: Utilities that enhance Festival with some useful features
url: https://www.freebsoft.org/festival-freebsoft-utils
rpm_license: GPL-2.0-or-later AND GPL-2.0-or-later OR GFDL-1.2-no-invariants-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/festival-freebsoft-utils-0.10-45.fc45.src.rpm
checksum_type: sha256
description:
  A collection of utilities that enhance Festival with some useful features. They
  provide all that is needed for interaction with Speech Dispatcher.

  Key festival-freebsoft-utils features are:

  • Generalized concept of input events. festival-freebsoft-utils allows not only
    plain text synthesis, but also combining it with sounds. Additionally,
    mechanism of logical events mapped to other events is provided.
  • Substitution of events for given words.
  • High-level voice selection mechanism and setting of basic prosodic parameters.
  • Spelling mode.
  • Capital letter signalization.
  • Punctuation modes, for explicit reading or not reading punctuation characters.
  • Incremental synthesis of texts and events.
  • Speech Dispatcher support.
  • Rudimentary SSML support.
  • Enhance the Festival extension language with functions commonly used in Lisp.
  • Support for wrapping already defined Festival functions by your own code.
  • Everything is written in the extension language, no patching of the Festival
    C++ sources is needed.


pkgId: 7d6cb39eed1ed700940927a04139f264a9cae895a0fc83ef228ae08189e582be
name: fetch-crl
arch: src
version: 3.0.23
epoch: 0
release: 9.fc45
summary: Downloads Certificate Revocation Lists
url: https://wiki.nikhef.nl/grid/FetchCRL3
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fetch-crl-3.0.23-9.fc45.src.rpm
checksum_type: sha256
description:
  This tool and associated timer entry ensure that Certificate Revocation
  Lists (CRLs) are periodically retrieved from the web sites of the respective
  Certification Authorities.
  It assumes that the installed CA files follow the hash.crl_url convention.


pkgId: c4a65791b9984ff322f342e41f5fe5e06f46cd5fd01ffc7c1905428b7d4d54a7
name: fetchlog
arch: src
version: 1.4
epoch: 0
release: 32.fc45
summary: Utility to display new messages of a logfile since last run
url: http://sourceforge.net/projects/fetchlog
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fetchlog-1.4-32.fc45.src.rpm
checksum_type: sha256
description:
  The fetchlog utility displays the last new messages of a logfile. It is
  similar like tail (1) but offers some extra functionality for output
  formatting. To show only the new messages appeared since the last call
  fetchlog uses a bookmark to remember which messages have been fetched.


pkgId: 25f83b0249dda1adbe16f0ae51f610a57ee3f8fc7a68d773ecc48dfb53bd3739
name: fetchmail
arch: src
version: 6.6.6
epoch: 0
release: 2.fc45
summary: A remote mail retrieval and forwarding utility
url: http://www.fetchmail.info/
rpm_license: GPL-2.0-or-later AND LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fetchmail-6.6.6-2.fc45.src.rpm
checksum_type: sha256
description:
  Fetchmail is a remote mail retrieval and forwarding utility intended
  for use over on-demand TCP/IP links, like SLIP or PPP connections.
  Fetchmail supports every remote-mail protocol currently in use on the
  Internet (POP2, POP3, RPOP, APOP, KPOP, all IMAPs, ESMTP ETRN, IPv6,
  and IPSEC) for retrieval. Then Fetchmail forwards the mail through
  SMTP so you can read it through your favorite mail client.

  Install fetchmail if you need to retrieve mail over SLIP or PPP
  connections.


pkgId: 443b7577ab8ba401d0d94f73e9d61d9fe2c456d6f668d774d1432f26921aa992
name: fex
arch: src
version: 2.0.0
epoch: 0
release: 26.fc45
summary: Field split/extraction like cut/awk
url: http://semicomplete.com/projects/fex/
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fex-2.0.0-26.fc45.src.rpm
checksum_type: sha256
description:
  Fex is a powerful field extraction tool. Fex provides a very concise language
  for tokenizing strings and extracting fields.


pkgId: c6ac7c8bdc9c0b007b314a4988998b1dd02287ddbdb87db820e6aa8e580a5e4e
name: fex-emu
arch: src
version: 2604
epoch: 0
release: 1.fc45
summary: Fast usermode x86 and x86-64 emulator for ARM64
url: https://fex-emu.com
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-07.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fex-emu-2604-1.fc45.src.rpm
checksum_type: sha256
description:
  FEX allows you to run x86 and x86-64 binaries on an AArch64 host, similar to
  qemu-user and box86. It has native support for a rootfs overlay, so you don't
  need to chroot, as well as some thunklibs so it can forward things like GL to
  the host. FEX presents a Linux 5.0+ interface to the guest, and supports only
  AArch64 as a host. FEX is very much work in progress, so expect things to
  change.

rpm_license:
  MIT AND Apache-2.0 AND BSL-1.0 AND BSD-3-Clause AND GPL-2.0-only ( ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-2-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR CDDL-1.0) AND ((GPL-2.0-only WITH Linux-syscall-note) OR Linux-OpenIB) AND ((GPL-2.0-only WITH Linux-syscall-note) OR MIT) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR MIT) AND BSD-3-Clause AND (GPL-1.0-or-later WITH Linux-syscall-note) AND GPL-2.0-only AND (GPL-2.0-only WITH Linux-syscall-note) AND (GPL-2.0-or-later WITH Linux-syscall-note) AND (LGPL-2.0-or-later WITH Linux-syscall-note) AND (LGPL-2.1-only WITH Linux-syscall-note) AND (LGPL-2.1-or-later WITH Linux-syscall-note) AND MIT ) AND( GPL-3.0-or-later AND LGPL-3.0-or-later AND (GPL-3.0-or-later WITH GCC-exception-3.1) AND (GPL-3.0-or-later WITH Texinfo-exception) AND (LGPL-2.1-or-later WITH GCC-exception-2.0) AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND (GPL-2.0-or-later WITH GNU-compiler-exception) AND BSL-1.0 AND GFDL-1.3-or-later AND Linux-man-pages-copyleft-2-para AND SunPro AND BSD-1-Clause AND BSD-2-Clause AND BSD-2-Clause-Views AND BSD-3-Clause AND BSD-4-Clause AND BSD-Source-Code AND Zlib AND MIT AND Apache-2.0 AND (Apache-2.0 WITH LLVM-Exception) AND ZPL-2.1 AND ISC AND LicenseRef-Fedora-Public-Domain AND HP-1986 AND curl AND Martin-Birgmeier AND HPND-Markus-Kuhn AND dtoa AND SMLNJ AND AMD-newlib AND OAR AND HPND-merchantability-variant AND HPND-Intel ) AND( LGPL-2.1-or-later AND SunPro AND LGPL-2.1-or-later WITH GCC-exception-2.0 AND BSD-3-Clause AND GPL-2.0-or-later AND LGPL-2.1-or-later WITH GNU-compiler-exception AND GPL-2.0-only AND ISC AND LicenseRef-Fedora-Public-Domain AND HPND AND CMU-Mach AND LGPL-2.0-or-later AND Unicode-3.0 AND GFDL-1.1-or-later AND GPL-1.0-or-later AND FSFUL AND MIT AND Inner-Net-2.0 AND X11 AND GPL-2.0-or-later WITH GCC-exception-2.0 AND GFDL-1.3-only AND GFDL-1.1-only AND GPL-3.0-or-later AND GPL-3.0-or-later WITH Autoconf-exception-generic-3.0 AND GPL-3.0-or-later WITH Texinfo-exception )


pkgId: 534171909eebfd3f9dca120fa64eae299eed711514beeeda5df3f8ac35c4eb5e
name: fex-emu-rootfs-fedora
arch: src
version: 44^20260410.n.0
epoch: 0
release: 3.fc45
summary: Fedora-based RootFS for the FEX emulator
description:
  This package provides a RootFS based on Fedora Linux to be used by the FEX
  emulator.

url: https://pagure.io/fedora-kiwi-descriptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fex-emu-rootfs-fedora-44^20260410.n.0-3.fc45.src.rpm
checksum_type: sha256
rpm_license:
  (( GPL-1.0-or-later OR Artistic-1.0-Perl ) AND BSD-3-Clause) AND ((AFL-2.1 OR GPL-2.0-or-later) AND GPL-2.0-or-later) AND ((FTL OR GPL-2.0-or-later) AND BSD-3-Clause AND MIT AND MIT-Modern-Variant AND LicenseRef-Fedora-Public-Domain AND Zlib) AND ((GPL-1.0-or-later OR Artistic-1.0-Perl) AND Artistic-2.0) AND ((GPL-1.0-or-later OR Artistic-1.0-Perl) AND FSFAP) AND ((GPL-1.0-or-later OR Artistic-1.0-Perl) AND MPL-2.0) AND ((GPL-1.0-or-later OR Artistic-1.0-Perl) AND Martin-Birgmeier AND Spencer-86 AND MIT AND Unicode-3.0 AND LicenseRef-Fedora-Public-Domain) AND ((GPL-1.0-or-later OR Artistic-1.0-Perl) AND metamail) AND ((GPL-2.0-or-later OR LGPL-3.0-or-later) AND GPL-3.0-or-later) AND ((LGPL-3.0-or-later OR GPL-2.0-or-later OR (LGPL-3.0-or-later AND GPL-2.0-or-later)) AND GFDL-1.3-invariants-or-later) AND ((MPL-2.0 OR LGPL-2.1-or-later) AND Apache-2.0 WITH LLVM-exception AND BSD-3-Clause AND CC0-1.0 AND GPL-3.0-or-later AND IJG AND ISC AND MIT AND Unicode-3.0 AND Unicode-DFS-2016 AND (0BSD OR MIT OR Apache-2.0) AND (Apache-2.0 OR MIT) AND (Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT) AND (BSD-2-Clause OR Apache-2.0 OR MIT) AND (BSD-3-Clause OR Apache-2.0) AND (MIT OR Apache-2.0 OR Zlib) AND (Unlicense OR MIT)) AND (0BSD AND GPL-2.0-or-later AND LicenseRef-Fedora-Public-Domain) AND (Apache-2.0 AND BSD-3-Clause WITH Google-Patent-WebM AND BSD-3-Clause AND FSFULLRWD) AND (Apache-2.0 AND BSD-3-Clause) AND (Apache-2.0 AND GPL-3.0-or-later AND MIT) AND (Apache-2.0 AND LGPL-2.0-or-later AND LGPL-2.1-or-later AND (Apache-2.0 OR LGPL-2.1-or-later)) AND (Apache-2.0 WITH LLVM-exception AND BSD-3-Clause AND Zlib AND BSD-2-Clause) AND (Apache-2.0 WITH LLVM-exception OR NCSA OR MIT) AND (Apache-2.0 WITH LLVM-exception OR NCSA) AND (BSD-2-Clause AND BSD-3-Clause) AND (BSD-2-Clause AND FSFULLR AND GPL-2.0-or-later WITH Libtool-exception AND BSD-3-Clause AND FSFUL) AND (BSD-2-Clause AND IJG AND Apache-2.0 AND BSD-3-Clause) AND (BSD-2-Clause AND ISC AND MIT AND LicenseRef-BSD-2-Clause-WITH-AdditionRef-AOMPL-1.0 AND (Apache-2.0 OR MIT) AND (Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT) AND (Unlicense OR MIT)) AND (BSD-2-Clause AND ISC) AND (BSD-2-Clause AND MIT) AND (BSD-2-Clause and LGPL-2.1-or-later) AND (BSD-2-Clause-Darwin AND BSD-2-Clause) AND (BSD-3-Clause AND (BSD-3-Clause OR GPL-2.0-only) AND GPL-2.0-or-later AND LGPL-2.1-or-later AND LGPL-2.0-or-later AND MIT-Modern-Variant) AND (BSD-3-Clause AND Apache-2.0 AND Zlib) AND (BSD-3-Clause AND BSD-2-Clause AND GPL-3.0-or-later) AND (BSD-3-Clause AND BSD-2-Clause AND ISC) AND (BSD-3-Clause AND BSD-2-Clause) AND (BSD-3-Clause AND FSFULLR AND X11 AND GPL-2.0-or-later AND FSFAP AND FSFUL AND GPL-3.0-or-later) AND (BSD-3-Clause AND GPL-2.0-or-later AND GFDL-1.3-or-later) AND (BSD-3-Clause AND GPL-2.0-or-later) AND (BSD-3-Clause AND ISC AND LicenseRef-Fedora-Public-Domain) AND (BSD-3-Clause AND LGPL-2.1-or-later) AND (BSD-3-Clause AND MIT AND LicenseRef-Fedora-Public-Domain) AND (BSD-3-Clause AND MIT-open-group AND Zlib AND Apache-2.0) AND (BSD-3-Clause OR GPL-2.0-only) AND (BSD-3-Clause OR GPL-2.0-or-later) AND (BSD-3-clause AND TU-Berlin-1.0) AND (Brian-Gladman-2-Clause AND BSD-2-Clause AND (BSD-2-Clause OR GPL-2.0-or-later) AND BSD-2-Clause-first-lines AND BSD-3-Clause AND BSD-4-Clause AND CMU-Mach-nodoc AND FSFULLRWD AND HPND AND HPND-export2-US AND HPND-export-US AND HPND-export-US-acknowledgement AND HPND-export-US-modify AND ISC AND MIT AND MIT-CMU AND OLDAP-2.8 AND OpenVision) AND (CC0-1.0 AND GPL-2.0-or-later AND GPL-3.0-or-later AND LGPL-2.1-or-later AND LGPL-3.0-or-later AND (BSD-3-Clause OR LGPL-3.0-or-later OR GPL-2.0-or-later) AND CC-BY-4.0 AND MIT) AND (GPL-1.0-or-later AND GPL-2.0-only AND GPL-2.0-or-later AND GPL-3.0-or-later AND LGPL-2.1-or-later AND BSD-2-Clause AND BSD-3-Clause AND BSD-4-Clause-UC AND LicenseRef-Fedora-Public-Domain) AND (GPL-1.0-or-later AND GPL-2.0-or-later AND GPL-3.0-or-later WITH Autoconf-exception-generic) AND (GPL-1.0-or-later OR Artistic-1.0-Perl) AND (GPL-2.0-only AND GPL-2.0-or-later AND BSD-2-Clause AND BSD-3-Clause AND BSD-4-Clause-UC AND LicenseRef-Fedora-Public-Domain) AND (GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.0-only AND LGPL-2.0-or-later AND LGPL-2.1-or-later AND LGPL-3.0-or-later AND BSD-3-Clause AND IJG-short AND (MIT OR Unlicense)) AND (GPL-2.0-only OR BSD-2-Clause AND BSD-3-Clause) AND (GPL-2.0-or-later AND BSD-2-Clause) AND (GPL-2.0-or-later AND GPL-3.0-or-later AND FSFUL AND FSFULLRWD AND LGPL-2.1-only AND LGPL-2.1-or-later AND X11) AND (GPL-2.0-or-later AND LGPL-2.0-or-later AND LGPL-2.1-or-later AND BSD-2-Clause) AND (GPL-2.0-or-later AND LGPL-2.1-only AND MIT AND BSD-4-Clause-UC AND MS-PL AND MPL-1.1) AND (GPL-2.0-or-later AND LGPL-2.1-or-later) AND (GPL-2.0-or-later AND MIT) AND (GPL-2.0-or-later OR Artistic-1.0-Perl) AND (GPL-2.0-or-later OR LGPL-2.1-or-later) AND (GPL-2.0-or-later OR LGPL-3.0-or-later) AND (GPL-2.0-or-later WITH Autoconf-exception-generic) AND (GPL-2.0-or-later WITH SANE-exception AND GPL-2.0-or-later AND GPL-2.0-only AND LGPL-2.0-or-later AND LGPL-2.1-or-later AND LicenseRef-Fedora-Public-Domain AND IJG AND MIT) AND (GPL-3.0-or-later AND (GPL-3.0-or-later WITH Bison-exception-2.2) AND (LGPL-2.0-or-later WITH GCC-exception-2.0) AND BSD-3-Clause AND GFDL-1.3-or-later AND GPL-2.0-or-later AND LGPL-2.1-or-later AND LGPL-2.0-or-later) AND (GPL-3.0-or-later AND (GPL-3.0-or-later WITH GCC-exception-3.1) AND GPL-2.0-or-later AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND LGPL-2.0-or-later) AND (GPL-3.0-or-later AND GFDL-1.3-no-invariants-or-later AND LGPL-2.1-or-later AND LGPL-3.0-or-later) AND (GPL-3.0-or-later AND GFDL-1.3-only) AND (GPL-3.0-or-later AND GFDL-1.3-or-later AND BSD-4-Clause-UC AND MIT AND X11 AND LicenseRef-Fedora-Public-Domain) AND (GPL-3.0-or-later AND GPL-2.0-or-later AND GFDL-1.3-no-invariants-or-later) AND (GPL-3.0-or-later AND GPL-2.0-or-later AND LGPL-2.1-or-later AND BSD-3-Clause) AND (GPL-3.0-or-later AND LGPL-2.1-or-later AND (LGPL-3.0-or-later OR GPL-2.0-or-later)) AND (GPL-3.0-or-later AND LGPL-2.1-or-later AND LGPL-3.0-or-later) AND (GPL-3.0-or-later AND LGPL-2.1-or-later) AND (GPL-3.0-or-later AND LGPL-3.0-or-later AND (GPL-3.0-or-later WITH GCC-exception-3.1) AND (GPL-3.0-or-later WITH Texinfo-exception) AND (LGPL-2.1-or-later WITH GCC-exception-2.0) AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND (GPL-2.0-or-later WITH GNU-compiler-exception) AND BSL-1.0 AND GFDL-1.3-or-later AND Linux-man-pages-copyleft-2-para AND SunPro AND BSD-1-Clause AND BSD-2-Clause AND BSD-2-Clause-Views AND BSD-3-Clause AND BSD-4-Clause AND BSD-Source-Code AND Zlib AND MIT AND Apache-2.0 AND (Apache-2.0 WITH LLVM-Exception) AND ZPL-2.1 AND ISC AND LicenseRef-Fedora-Public-Domain AND HP-1986 AND curl AND Martin-Birgmeier AND HPND-Markus-Kuhn AND dtoa AND SMLNJ AND AMD-newlib AND OAR AND HPND-merchantability-variant AND HPND-Intel) AND (GPL-3.0-or-later AND LGPL-3.0-or-later AND LGPL-2.1-or-later AND GPL-2.0-or-later AND LGPL-2.0-or-later AND GFDL-1.3-no-invariants-or-later) AND (GPL-3.0-or-later AND LGPL-3.0-or-later) AND (GPL-3.0-or-later AND MIT AND Unicode-DFS-2016 AND (0BSD OR MIT OR Apache-2.0) AND (Apache-2.0 OR MIT) AND (Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT) AND (BSD-2-Clause OR Apache-2.0 OR MIT) AND (MIT OR Zlib OR Apache-2.0) AND (Unlicense OR MIT)) AND (GPL-3.0-or-later AND MIT AND Unicode-DFS-2016 AND (0BSD OR MIT OR Apache-2.0) AND (Apache-2.0 OR MIT) AND (BSD-2-Clause OR Apache-2.0 OR MIT) AND (MIT OR Zlib OR Apache-2.0) AND (Unlicense OR MIT)) AND (HPND AND HPND-sell-variant AND X11 AND X11-distribute-modifications-variant AND MIT AND MIT-open-group AND xkeyboard-config-Zinoviev) AND (HPND AND LicenseRef-Fedora-Public-Domain AND Unicode-DFS-2016) AND (HPND AND MIT) AND (ISC AND BSD-2-Clause AND BSD-3-Clause AND BSD-4-Clause-UC) AND (ISC AND BSD-4-Clause AND BSD-2-Clause AND pkgconf AND MIT) AND (LGPL-2.0-or-later AND Apache-2.0 AND BSD-3-Clause AND BSL-1.0 AND MIT AND Unicode-3.0 AND Unicode-DFS-2016 AND (Apache-2.0 OR MIT) AND (Unlicense OR MIT)) AND (LGPL-2.0-or-later AND BSD-3-Clause AND GPL-2.0-or-later AND Apache-2.0 AND (LGPL-2.0-or-later AND BSD-3-Clause) AND (MIT WITH fmt-exception) AND NCL AND MIT AND LicenseRef-Fedora-Public-Domain) AND (LGPL-2.0-or-later AND LGPL-2.1-or-later) AND (LGPL-2.1-only OR MPL-1.1) AND (LGPL-2.1-or-later AND (BSD-3-Clause OR LGPL-2.1-or-later) AND FSFULLR AND GPL-2.0-or-later) AND (LGPL-2.1-or-later AND Apache-2.0 AND BSD-3-Clause AND MIT AND MPL-2.0 AND Unicode-3.0 AND Unicode-DFS-2016 AND (0BSD OR MIT OR Apache-2.0) AND (Apache-2.0 OR MIT) AND (BSD-3-Clause OR Apache-2.0) AND (MIT OR Apache-2.0 OR Zlib) AND (Unlicense OR MIT)) AND (LGPL-2.1-or-later AND BSD-3-Clause AND BSD-2-Clause AND BSD-2-Clause-FreeBSD AND 0BSD AND CC0-1.0 AND LicenseRef-Fedora-Public-Domain) AND (LGPL-2.1-or-later AND GPL-2.0-or-later AND BSD-3-Clause) AND (LGPL-2.1-or-later AND GPL-2.0-or-later AND IJG-short AND BSD-2-Clause) AND (LGPL-2.1-or-later AND LGPL-2.0-or-later AND BSD-2-Clause-Views AND MIT) AND (LGPL-2.1-or-later AND LGPL-2.1-only AND BSD-2-Clause) AND (LGPL-2.1-or-later AND MIT AND GPL-2.0-or-later) AND (LGPL-2.1-or-later AND MIT) AND (LGPL-2.1-or-later AND SunPro AND LGPL-2.1-or-later WITH GCC-exception-2.0 AND BSD-3-Clause AND GPL-2.0-or-later AND LGPL-2.1-or-later WITH GNU-compiler-exception AND GPL-2.0-only AND ISC AND LicenseRef-Fedora-Public-Domain AND HPND AND CMU-Mach AND LGPL-2.0-or-later AND Unicode-3.0 AND GFDL-1.1-or-later AND GPL-1.0-or-later AND FSFUL AND MIT AND Inner-Net-2.0 AND X11 AND GPL-2.0-or-later WITH GCC-exception-2.0 AND GFDL-1.3-only AND GFDL-1.1-only AND GPL-3.0-or-later AND GPL-3.0-or-later WITH Autoconf-exception-generic-3.0 AND GPL-3.0-or-later WITH Texinfo-exception) AND (LGPL-2.1-or-later AND Unicode-DFS-2016) AND (LGPL-2.1-or-later OR MPL-2.0 OR GPL-2.0-or-later) AND (LGPL-3.0-only OR CC-BY-SA-3.0) AND (LGPL-3.0-or-later OR GPL-2.0-or-later) AND (LGPL-3.0-or-later and MIT) AND (LicenseRef-BSD-3-Clause-Clear-WITH-AdditionRef-AOMPL-1.0 AND MIT AND ISC AND LicenseRef-Fedora-Public-Domain AND BSD-2-Clause) AND (LicenseRef-Callaway-BSD AND LicenseRef-Callaway-MIT) AND (LicenseRef-Callaway-LGPLv2 AND LicenseRef-Callaway-MIT) AND (LicenseRef-Callaway-LGPLv2+ AND Zlib) AND (LicenseRef-Callaway-MPLv1.1 OR GPL-2.0-or-later OR LicenseRef-Callaway-LGPLv2+) AND (LicenseRef-Fedora-Public-Domain AND (GPL-2.0-only WITH ClassPath-exception-2.0)) AND (LicenseRef-Fedora-Public-Domain AND ZPL-2.1) AND (MIT AND BSD-3-Clause AND SGI-B-2.0) AND (MIT AND CC-PDDC AND (GPL-3.0-or-later WITH Texinfo-exception)) AND (MIT AND GPL-2.0-or-later) AND (MIT AND GPL-3.0-or-later) AND (MIT AND HPND-sell-variant AND ICU) AND (MIT AND HPND-sell-variant AND SMLNJ AND MIT-open-group AND X11) AND (MIT AND HPND-sell-variant) AND (MIT AND ISC-Veillard AND W3C) AND (MIT AND LicenseRef-Fedora-Public-Domain) AND (MIT AND MIT-open-group AND X11) AND (MIT AND MIT-open-group) AND (MIT AND PSF-2.0 AND GPL-2.0-or-later) AND (MIT AND Python-2.0.1 AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND ISC AND MPL-2.0 AND (Apache-2.0 OR BSD-2-Clause)) AND (MIT AND X11 AND HPND AND CC-BY-4.0) AND (MIT AND X11 AND MIT-CMU) AND (MIT AND X11) AND (MIT AND X11-distribute-modifications-variant) AND (MIT-feh AND MIT-Modern-Variant AND BSD-1-Clause AND BSD-3-Clause AND GPL-3.0-or-later WITH Autoconf-exception-macro) AND (MIT-open-group AND HPND-sell-variant AND X11 AND HPND-doc AND HPND-doc-sell) AND (MIT-open-group AND SMLNJ AND MIT) AND (MIT-open-group AND SMLNJ AND X11 AND ISC) AND (MIT-open-group AND X11 AND HPND AND HPND-sell-variant AND SMLNJ AND MIT AND ISC AND HPND-doc AND HPND-doc-sell) AND (MIT-open-group AND X11 AND HPND AND HPND-sell-variant AND SMLNJ AND NTP) AND (Python-2.0.1 AND MIT AND BSD-3-Clause AND MIT-CMU AND HPND-SMC AND BSD-2-Clause AND dtoa) AND (SISSL AND BSD-3-Clause) AND (SMLNJ AND HPND-sell-variant) AND (Unicode-DFS-2016 AND BSD-2-Clause AND BSD-3-Clause AND NAIST-2003 AND LicenseRef-Fedora-Public-Domain) AND (Vim AND LGPL-2.1-or-later AND MIT AND GPL-1.0-only AND (GPL-2.0-only OR Vim) AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND GPL-2.0-or-later AND GPL-3.0-or-later AND OPUBL-1.0 AND Apache-2.0 WITH Swift-exception) AND (X11-distribute-modifications-variant AND HPND-sell-variant) AND (Zlib AND (LicenseRef-Callaway-Public-Domain OR MIT-0) AND LicenseRef-Callaway-MIT) AND (Zlib AND BSD-3-Clause AND MIT AND IJG) AND (Zlib AND LGPL-2.1-or-later AND (Unlicense OR MIT-0) AND (MIT OR Unlicense) AND LicenseRef-Fedora-Public-Domain) AND (Zlib AND MIT AND Apache-2.0 AND (Apache-2.0 OR MIT)) AND 0BSD AND Apache-2.0 AND Artistic-2.0 AND BSD-2-Clause AND BSD-2-Clause-Patent AND BSD-3-Clause AND BSD-4-Clause AND BSD-Attribution-HPND-disclaimer AND Boehm-GC AND CC0-1.0 AND FSFAP AND GD AND GPL-1.0-or-later AND GPL-2.0-only AND GPL-2.0-or-later AND GPL-3.0-only AND GPL-3.0-or-later AND HPND-sell-variant AND Info-ZIP AND LGPL-2.0-or-later AND LGPL-2.1-only AND LGPL-2.1-or-later AND LGPL-3.0-or-later AND LGPLv2+ AND LicenseRef-Callaway-BSD AND LicenseRef-Callaway-LGPLv2 AND LicenseRef-Callaway-LGPLv2+ AND LicenseRef-Fedora-Public-Domain AND LicenseRef-Liberation AND MIT AND MIT-0 AND MIT-Modern-Variant AND MIT-open-group AND MPL-2.0 AND NCSA AND OFL-1.1 AND OFL-1.1-RFN AND OLDAP-2.8 AND Python-2.0.1 AND TTWL AND X11 AND X11-distribute-modifications-variant AND Zlib AND blessing AND curl AND gpl-2.0-or-later AND libtiff AND tu-berlin-2.0 AND zlib


pkgId: 375556736f5088f6fd70ee961cbdfc8ca18b9a96eb30e625c6d383ecadf8f04f
name: ffcall
arch: src
version: 2.5
epoch: 0
release: 8.fc45
summary: Libraries for foreign function call interfaces
url: https://www.gnu.org/software/libffcall/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/ffcall-2.5-8.fc45.src.rpm
checksum_type: sha256
description:
  This is a collection of four libraries which can be used to build foreign
  function call interfaces in embedded interpreters.  The four packages are:
   - avcall: calling C functions with variable arguments
   - vacall: C functions accepting variable argument prototypes
   - trampoline: closures as first-class C functions
   - callback: closures with variable arguments as first-class C functions (a
     reentrant combination of vacall and trampoline)


pkgId: 685168cb825a6ece399a9e988accc0ab353fff36496751c1f40328a9e35c9863
name: fflas-ffpack
arch: src
version: 2.5.0
epoch: 0
release: 22.fc45
summary: Finite field linear algebra subroutines
url: https://linbox-team.github.io/fflas-ffpack/
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fflas-ffpack-2.5.0-22.fc45.src.rpm
checksum_type: sha256
description:
  The FFLAS-FFPACK library provides a set of basic routines for linear algebra
  over a finite field or the ring of integers with dense and sparse matrices.

rpm_license:
  LGPL-2.1-or-later AND LGPL-2.0-or-later AND CECILL-B AND FSFAP AND FSFUL AND FSFULLR AND GPL-2.0-or-later AND GPL-2.0-or-later WITH Autoconf-exception-generic


pkgId: 44fc10076734a34a83a923448ee2c6130693b4fb82d94827218d34a0496eb261
name: ffmpeg
arch: src
version: 8.1.2
epoch: 0
release: 4.fc45
summary: A complete solution to record, convert and stream audio and video
url: https://ffmpeg.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/ffmpeg-8.1.2-4.fc45.src.rpm
checksum_type: sha256
description:
  FFmpeg is a leading multimedia framework, able to decode, encode, transcode,
  mux, demux, stream, filter and play pretty much anything that humans and
  machines have created. It supports the most obscure ancient formats up to the
  cutting edge. No matter if they were designed by some standards committee, the
  community or a corporation.


  This build of ffmpeg is limited in the number of codecs supported.


pkgId: cf70d23c16e37f2a1a69aa6f3ad2c62ef55582e16f722af4914d4ecfcb56858a
name: ffmpegthumbnailer
arch: src
version: 2.3.0
epoch: 0
release: 3.fc45
summary: Lightweight video thumbnailer that can be used by file managers
url: https://github.com/dirkvdb/ffmpegthumbnailer
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/ffmpegthumbnailer-2.3.0-3.fc45.src.rpm
checksum_type: sha256
description:
  FFmpegthumbnailer is a lightweight video thumbnailer that can be used by file
  managers to create thumbnails for your video files. The thumbnailer uses ffmpeg
  to decode frames from the video files, so supported videoformats depend on the
  configuration flags of ffmpeg.


pkgId: c85e9e2475fea61570802590df582c08cd384d53893e54161a4581a7fee6a3ca
name: ffms2
arch: src
version: 5.0
epoch: 0
release: 9.fc45
summary: Video source library for easy frame accurate access
url: https://github.com/FFMS/ffms2
rpm_license: MIT AND LGPL-2.1-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/ffms2-5.0-9.fc45.src.rpm
checksum_type: sha256
description:
  FFmpegSource (usually known as FFMS or FFMS2) is a cross-platform wrapper
  library around FFmpeg. It gives you an easy, convenient way to say "open and
  decompress this media file for me, I don't care how you do it" and get frame-
  and sample-accurate access (usually), without having to bother with the
  sometimes less than straightforward and less than perfectly documented FFmpeg
  API.


pkgId: a63b6e745563a37b4ec601f942b8781083f95141ae9eb5866118ae07a341171b
name: ffsb
arch: src
version: 6.0
epoch: 0
release: 0.34.rc2.fc45
summary: The Flexible Filesystem Benchmark
url: http://sourceforge.net/projects/ffsb
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/ffsb-6.0-0.34.rc2.fc45.src.rpm
checksum_type: sha256
description:
  The Flexible Filesystem Benchmark (FFSB) is a cross-platform filesystem
  performance measurement tool. It uses customizable profiles to measure
  of different workloads, and it supports multiple groups of threads
  across multiple filesystems.


pkgId: 50603eb8fc164ca7afcf80573b1bbb887ed7189127781bd0e200894932ad746e
name: fftw
arch: src
version: 3.3.10
epoch: 0
release: 18.fc45
summary: A Fast Fourier Transform library
url: http://www.fftw.org
rpm_license: GPL-2.0-or-later AND MIT AND BSD-2-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fftw-3.3.10-18.fc45.src.rpm
checksum_type: sha256
description:
  FFTW is a C subroutine library for computing the Discrete Fourier
  Transform (DFT) in one or more dimensions, of both real and complex
  data, and of arbitrary input size.


pkgId: 973b93e3ab4ea65440e3ab4e0eda3983ca3bdd201d576287a364281ebf0bc8ae
name: fftw2
arch: src
version: 2.1.5
epoch: 0
release: 55.fc45
summary: Fast Fourier Transform library (version 2)
url: https://www.fftw.org
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fftw2-2.1.5-55.fc45.src.rpm
checksum_type: sha256
description:
  FFTW is a C subroutine library for computing the Discrete Fourier
  Transform (DFT) in one or more dimensions, of both real and complex
  data, and of arbitrary input size. We believe that FFTW, which is free
  software, should become the FFT library of choice for most
  applications. Our benchmarks, performed on on a variety of platforms,
  show that FFTW's performance is typically superior to that of other
  publicly available FFT software.


pkgId: dfcdf59b37ec12790ace7a5caef44feea1353e67b351bcdd516e11dd08626552
name: fheroes2
arch: src
version: 1.1.17
epoch: 0
release: 3.fc45
summary: Free implementation of the popular game engine
url: https://github.com/ihhub/fheroes2
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fheroes2-1.1.17-3.fc45.src.rpm
checksum_type: sha256
description:
  This open source multiplatform project, written from scratch, is designed to
  reproduce the original game with significant improvements in gameplay, graphics
  and logic (including support for high-resolution graphics, improved AI,
  numerous fixes and user interface improvements), breathing new life into one of
  the most addictive turn-based strategy games.


pkgId: dca81b44655c8b2f8f64b85eb9990158eb19f8f2d8aff3a45f34431d6fd000f2
name: fido
arch: src
version: 1.1.5
epoch: 0
release: 26.fc45
summary: Multi-threaded file watch utility
url: http://www.joedog.org/fido-home/
rpm_license: GPL-2.0-or-later AND LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fido-1.1.5-26.fc45.src.rpm
checksum_type: sha256
description:
  A multi-threaded file watch utility. It can monitor files for changes in
  content or modification times. If it notices a change, it will kick off a
  user-defined script.


pkgId: 7f0222c3e4e9e13ae61c1c79971414938e11cc9c5bab371e655020820817d082
name: fig2ps
arch: src
version: 1.5
epoch: 0
release: 30.fc45
summary: Utility for converting xfig pictures to PS/PDF
url: http://fig2ps.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-30.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/fig2ps-1.5-30.fc45.src.rpm
checksum_type: sha256
description:
  fig2ps is a perl script which converts xfig files to postscript or
  PDF, using LaTeX for processing text (a capability not included in
  transfig). This provides the benefit of seamless integration of
  figures into documents (the font in the figures is the same as in the
  text), and allows for special typesetting commands (such as
  mathematical equations) to be included in figures.


pkgId: 38147afec4a49977d68ca3f2a4bf892d9569a5025c6ca18b391dbbe8f36399d7
name: figlet
arch: src
version: 2.2.5
epoch: 0
release: 40.fc45
summary: A program for making large letters out of ordinary text
url: http://www.figlet.org/
rpm_license: BSD-3-Clause and MIT and ISC and WTFPL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/figlet-2.2.5-40.fc45.src.rpm
checksum_type: sha256
description:
  FIGlet prints its input using large characters (called "FIGcharacters") made
  up of ordinary screen characters (called "sub-characters"). FIGlet output is
  generally reminiscent of the sort of "signatures" many people like to put at
  the end of e-mail and UseNet messages. It is also reminiscent of the output of
  some banner programs, although it is oriented normally, not sideways.


pkgId: 8590e9af0d8085e7639b9090d62142c664e81b5e2b902c17cb03780e874eab78
name: figtoipe
arch: src
version: 20091205
epoch: 0
release: 36.fc45
summary: FIG to IPE conversion tool
url: http://ipe7.sourceforge.net/
rpm_license: LicenseRef-Callaway-GPLv2+-with-exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/f/figtoipe-20091205-36.fc45.src.rpm
checksum_type: sha256
description:
  Figtoipe is a program that reads FIG files (as generated by
  xfig) and generates an XML file readable by the Ipe editor.


